diff mbox series

[v4,1/6] dt: bindings: lp8860: Update bindings for lp8860

Message ID 20171212220143.31210-2-dmurphy@ti.com
State New
Headers show
Series [v4,1/6] dt: bindings: lp8860: Update bindings for lp8860 | expand

Commit Message

Dan Murphy Dec. 12, 2017, 10:01 p.m. UTC
Update the lp8860 bindings to fix various issues
found.  Add address-cells and size-cells, rename
enable-gpio to enable-gpios, update the node name
to the device name and indent the node example.

Signed-off-by: Dan Murphy <dmurphy@ti.com>

---

v4 - No changes

v3 - Indicatd enable-gpios is active high, moved address and size cells to child
node patch and updated parent DT node name - https://patchwork.kernel.org/patch/10093745/
v2 - New patch

 Documentation/devicetree/bindings/leds/leds-lp8860.txt | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

-- 
2.15.0.124.g7668cbc60

Comments

Rob Herring (Arm) Dec. 15, 2017, 10:56 p.m. UTC | #1
On Tue, Dec 12, 2017 at 04:01:38PM -0600, Dan Murphy wrote:
> Update the lp8860 bindings to fix various issues

> found.  Add address-cells and size-cells, rename

> enable-gpio to enable-gpios, update the node name

> to the device name and indent the node example.

> 

> Signed-off-by: Dan Murphy <dmurphy@ti.com>

> ---

> 

> v4 - No changes

> 

> v3 - Indicatd enable-gpios is active high, moved address and size cells to child

> node patch and updated parent DT node name - https://patchwork.kernel.org/patch/10093745/

> v2 - New patch

> 

>  Documentation/devicetree/bindings/leds/leds-lp8860.txt | 14 +++++++-------

>  1 file changed, 7 insertions(+), 7 deletions(-)


Reviewed-by: Rob Herring <robh@kernel.org>
Rob Herring (Arm) Dec. 15, 2017, 10:57 p.m. UTC | #2
On Tue, Dec 12, 2017 at 04:01:38PM -0600, Dan Murphy wrote:
> Update the lp8860 bindings to fix various issues

> found.  Add address-cells and size-cells, rename


You are doing this in the next patch...

> enable-gpio to enable-gpios, update the node name

> to the device name and indent the node example.

> 

> Signed-off-by: Dan Murphy <dmurphy@ti.com>

> ---

> 

> v4 - No changes

> 

> v3 - Indicatd enable-gpios is active high, moved address and size cells to child

> node patch and updated parent DT node name - https://patchwork.kernel.org/patch/10093745/

> v2 - New patch

> 

>  Documentation/devicetree/bindings/leds/leds-lp8860.txt | 14 +++++++-------

>  1 file changed, 7 insertions(+), 7 deletions(-)

> 

> diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt

> index aad38dd94d4b..b9d09acbaa73 100644

> --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt

> +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt

> @@ -6,22 +6,22 @@ current sinks that can be controlled by a PWM input

>  signal, a SPI/I2C master, or both.

>  

>  Required properties:

> -	- compatible:

> +	- compatible :

>  		"ti,lp8860"

> -	- reg -  I2C slave address

> -	- label - Used for naming LEDs

> +	- reg : I2C slave address

> +	- label : Used for naming LEDs

>  

>  Optional properties:

> -	- enable-gpio - gpio pin to enable/disable the device.

> -	- supply - "vled" - LED supply

> +	- enable-gpios : gpio pin to enable (active high)/disable the device.

> +	- vled-supply : LED supply

>  

>  Example:

>  

> -leds: leds@6 {

> +led-controller@2d {

>  	compatible = "ti,lp8860";

>  	reg = <0x2d>;

>  	label = "display_cluster";

> -	enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;

> +	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;

>  	vled-supply = <&vbatt>;

>  }

>  

> -- 

> 2.15.0.124.g7668cbc60

>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
index aad38dd94d4b..b9d09acbaa73 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -6,22 +6,22 @@  current sinks that can be controlled by a PWM input
 signal, a SPI/I2C master, or both.
 
 Required properties:
-	- compatible:
+	- compatible :
 		"ti,lp8860"
-	- reg -  I2C slave address
-	- label - Used for naming LEDs
+	- reg : I2C slave address
+	- label : Used for naming LEDs
 
 Optional properties:
-	- enable-gpio - gpio pin to enable/disable the device.
-	- supply - "vled" - LED supply
+	- enable-gpios : gpio pin to enable (active high)/disable the device.
+	- vled-supply : LED supply
 
 Example:
 
-leds: leds@6 {
+led-controller@2d {
 	compatible = "ti,lp8860";
 	reg = <0x2d>;
 	label = "display_cluster";
-	enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 	vled-supply = <&vbatt>;
 }