diff mbox series

spi: spi-ep93xx: fix wrong SPI mode selection

Message ID 20200402121022.9976-1-js07.lee@samsung.com
State New
Headers show
Series spi: spi-ep93xx: fix wrong SPI mode selection | expand

Commit Message

Jungseung Lee April 2, 2020, 12:10 p.m. UTC
The mode bits on control register 0 are in a different order compared
to the spi mode define values. Thus, in the current code, it fails to
set the correct SPI mode selection. Fix it.

Signed-off-by: Jungseung Lee <js07.lee@samsung.com>
---
 drivers/spi/spi-ep93xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index 4e1ccd4e52b6..8c854b187b1d 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -31,7 +31,8 @@ 
 #include <linux/platform_data/spi-ep93xx.h>
 
 #define SSPCR0			0x0000
-#define SSPCR0_MODE_SHIFT	6
+#define SSPCR0_SPO		BIT(6)
+#define SSPCR0_SPH		BIT(7)
 #define SSPCR0_SCR_SHIFT	8
 
 #define SSPCR1			0x0004
@@ -159,7 +160,10 @@  static int ep93xx_spi_chip_setup(struct spi_master *master,
 		return err;
 
 	cr0 = div_scr << SSPCR0_SCR_SHIFT;
-	cr0 |= (spi->mode & (SPI_CPHA | SPI_CPOL)) << SSPCR0_MODE_SHIFT;
+	if (spi->mode & SPI_CPOL)
+		cr0 |= SSPCR0_SPO;
+	if (spi->mode & SPI_CPHA)
+		cr0 |= SSPCR0_SPH;
 	cr0 |= dss;
 
 	dev_dbg(&master->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",