diff mbox

[RFC] : Supporting PIO mode of operation in i2c_msg->flags

Message ID 55801272.1040006@linaro.org
State New
Headers show

Commit Message

Vaibhav Hiremath June 16, 2015, 12:11 p.m. UTC
On Tuesday 16 June 2015 02:48 PM, Wolfram Sang wrote:
>
>> Any update on this?
>
> Not yet.
>
> a) there was no code to look at
>

Actually its simple question, whether we can call i2c_transfer in
pm_power_off fn, where interupts are disabled and i2c_transfer fn may
sleep.

Just to illustrate my point,
I just quickly created something for you. Correct me if I am wrong here.


pm_power_off Usecase:
         __u8 *buf;              /* pointer to msg data                  */
  };
--
To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

=====

File: arch/arm64/kernel/process.c

void machine_power_off(void)
{
         local_irq_disable();
         smp_send_stop();
         if (pm_power_off)
                 pm_power_off();
}


Dummy pm_power_off Implementation:
=====

diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 03b70f8..e364a2a 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -1170,7 +1170,10 @@  static int i2c_pxa_xfer(struct i2c_adapter *adap, 
struct i2c_msg msgs[], int num
         i2c_pxa_enable(i2c, true);

         for (i = adap->retries; i >= 0; i--) {
-               ret = i2c_pxa_do_xfer(i2c, msgs, num);
+               if (msgs[0].flags & I2C_M_PIO)
+                       ret = i2c_pxa_do_pio_xfer(i2c, msgs, num);
+               else
+                       ret = i2c_pxa_do_xfer(i2c, msgs, num);
                 if (ret != I2C_RETRY)
                         goto out;

diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
index 0464e2d..2d7b11b 100644
--- a/drivers/mfd/88pm800.c
+++ b/drivers/mfd/88pm800.c
@@ -488,6 +488,52 @@  static void pm800_pages_exit(struct pm80x_chip *chip)
                 i2c_unregister_device(subchip->gpadc_page);
  }

+static struct pm80x_chip *pm80x_chip_g;
+
+#define PM800_SW_PDOWN                 (1 << 5)
+
+static void pm800_power_off(void)
+{
+       u8 data, buf[2];
+       struct i2c_msg msgs[2];
+       struct i2c_client *client = pm80x_chip_g->client;
+
+       pr_info("turning off power....\n");
+
+       /*
+        * pm_power_off fn get called at the end of machine_power_off(),
+        * so at this stage the irqs are disabled, so we have to use
+        * PIO mode of I2C transaction for both read and write.
+        */
+       /* Read register first */
+       msgs[0].addr = client->addr;
+       msgs[0].flags = I2C_M_PIO;
+       msgs[0].len = 1;
+       msgs[0].buf = buf;
+
+       msgs[1].addr = client->addr;
+       msgs[1].flags = I2C_M_RD | I2C_M_PIO;
+       msgs[1].len = 1;
+       msgs[1].buf = &data;
+
+       buf[0] = PM800_WAKEUP1;
+       if ( __i2c_transfer(client->adapter, msgs, 2) < 0) {
+               pr_err("%s read register fails...\n", __func__);
+               WARN_ON(1);
+       }
+
+       /* issue SW power down */
+       msgs[0].addr = client->addr;
+       msgs[0].flags = I2C_M_PIO;
+       msgs[0].len = 2;
+       msgs[0].buf[0] = PM800_WAKEUP1;
+       msgs[0].buf[1] = data | PM800_SW_PDOWN;
+       if (__i2c_transfer(client->adapter, msgs, 1) < 0) {
+               pr_err("%s write data fails...\n", __func__);
+               WARN_ON(1);
+       }
+}
+
  static int device_800_init(struct pm80x_chip *chip,
                                      struct pm80x_platform_data *pdata)
  {
@@ -612,6 +658,10 @@  static int pm800_probe(struct i2c_client *client,
         if (pdata && pdata->plat_config)
                 pdata->plat_config(chip, pdata);

+       /* keep global copy, required in power_off fn */
+       pm80x_chip_g = chip;
+       pm_power_off = pm800_power_off;
+
         return 0;

  err_device_init:
diff --git a/include/uapi/linux/i2c.h b/include/uapi/linux/i2c.h
index 0e949cb..22fda83 100644
--- a/include/uapi/linux/i2c.h
+++ b/include/uapi/linux/i2c.h
@@ -76,6 +76,7 @@  struct i2c_msg {
  #define I2C_M_IGNORE_NAK       0x1000  /* if I2C_FUNC_PROTOCOL_MANGLING */
  #define I2C_M_NO_RD_ACK                0x0800  /* if 
I2C_FUNC_PROTOCOL_MANGLING */
  #define I2C_M_RECV_LEN         0x0400  /* length will be first 
received byte */
+#define I2C_M_PIO              0x0200  /* pio mode of transaction */
         __u16 len;              /* msg length                           */