diff mbox

[01/13] ARM: add some L220 DT settings

Message ID 1444916813-31024-2-git-send-email-linus.walleij@linaro.org
State New
Headers show

Commit Message

Linus Walleij Oct. 15, 2015, 1:46 p.m. UTC
The RealView ARM11MPCore enables parity, eventmon and shared
override in the cache controller through its current boardfile,
but the code and DT bindings for the ARM L220 is currently
lacking the ability to set this up from DT. Add the required
bool parameters.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
I know this patch mixes code and DT changes but it is silly to
split such a small patch. Will submit this to Russell's patch
tracker if it looks OK to the DT people. (Or if they are quiet.)
---
 Documentation/devicetree/bindings/arm/l2cc.txt | 10 ++++++----
 arch/arm/mm/cache-l2x0.c                       | 15 +++++++++++++++
 2 files changed, 21 insertions(+), 4 deletions(-)

Comments

Russell King - ARM Linux Oct. 15, 2015, 1:57 p.m. UTC | #1
On Thu, Oct 15, 2015 at 03:46:41PM +0200, Linus Walleij wrote:
> The RealView ARM11MPCore enables parity, eventmon and shared
> override in the cache controller through its current boardfile,
> but the code and DT bindings for the ARM L220 is currently
> lacking the ability to set this up from DT. Add the required
> bool parameters.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> I know this patch mixes code and DT changes but it is silly to
> split such a small patch. Will submit this to Russell's patch
> tracker if it looks OK to the DT people. (Or if they are quiet.)
> ---
>  Documentation/devicetree/bindings/arm/l2cc.txt | 10 ++++++----
>  arch/arm/mm/cache-l2x0.c                       | 15 +++++++++++++++
>  2 files changed, 21 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
> index 06c88a4d28ac..4d262e9b3464 100644
> --- a/Documentation/devicetree/bindings/arm/l2cc.txt
> +++ b/Documentation/devicetree/bindings/arm/l2cc.txt
> @@ -67,12 +67,14 @@ Optional properties:
>    disable if zero.
>  - arm,prefetch-offset : Override prefetch offset value. Valid values are
>    0-7, 15, 23, and 31.
> -- arm,shared-override : The default behavior of the pl310 cache controller with
> -  respect to the shareable attribute is to transform "normal memory
> -  non-cacheable transactions" into "cacheable no allocate" (for reads) or
> -  "write through no write allocate" (for writes).
> +- arm,shared-override : The default behavior of the PL220 or PL310 cache
> +  controllers with respect to the shareable attribute is to transform "normal
> +  memory non-cacheable transactions" into "cacheable no allocate" (for reads)
> +  or "write through no write allocate" (for writes).
>    On systems where this may cause DMA buffer corruption, this property must be
>    specified to indicate that such transforms are precluded.
> +- arm,parity-enable : enable parity checking on the L2 cache (PL220 only).
> +- arm,eventmon-enable : enable the event monitor on the L2 cache (PL220 only).

I don't think we should introduce a DT property for this: if we support
the event monitor, then the event monitor support code should be
controlling this bit.
Rob Herring (Arm) Oct. 15, 2015, 1:58 p.m. UTC | #2
On Thu, Oct 15, 2015 at 8:46 AM, Linus Walleij <linus.walleij@linaro.org> wrote:
> The RealView ARM11MPCore enables parity, eventmon and shared
> override in the cache controller through its current boardfile,
> but the code and DT bindings for the ARM L220 is currently
> lacking the ability to set this up from DT. Add the required
> bool parameters.
>
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> I know this patch mixes code and DT changes but it is silly to
> split such a small patch. Will submit this to Russell's patch
> tracker if it looks OK to the DT people. (Or if they are quiet.)
> ---
>  Documentation/devicetree/bindings/arm/l2cc.txt | 10 ++++++----
>  arch/arm/mm/cache-l2x0.c                       | 15 +++++++++++++++
>  2 files changed, 21 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
> index 06c88a4d28ac..4d262e9b3464 100644
> --- a/Documentation/devicetree/bindings/arm/l2cc.txt
> +++ b/Documentation/devicetree/bindings/arm/l2cc.txt
> @@ -67,12 +67,14 @@ Optional properties:
>    disable if zero.
>  - arm,prefetch-offset : Override prefetch offset value. Valid values are
>    0-7, 15, 23, and 31.
> -- arm,shared-override : The default behavior of the pl310 cache controller with
> -  respect to the shareable attribute is to transform "normal memory
> -  non-cacheable transactions" into "cacheable no allocate" (for reads) or
> -  "write through no write allocate" (for writes).
> +- arm,shared-override : The default behavior of the PL220 or PL310 cache

PL220 is something else:

http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0249b/CHDIIEAD.html


> +  controllers with respect to the shareable attribute is to transform "normal
> +  memory non-cacheable transactions" into "cacheable no allocate" (for reads)
> +  or "write through no write allocate" (for writes).

I seem to recall the PL310 TRM says this bit is different from the
L220 or the default is.

>    On systems where this may cause DMA buffer corruption, this property must be
>    specified to indicate that such transforms are precluded.
> +- arm,parity-enable : enable parity checking on the L2 cache (PL220 only).

PL310 has parity.

> +- arm,eventmon-enable : enable the event monitor on the L2 cache (PL220 only).

and eventmon.

There's a slight problem here in that you can turn on these with DT,
but you can't turn them off as absence means don't touch. Maybe a
value of 0 should be allowed for disabling.

>  - prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
>    (forcibly enable), property absent (retain settings set by firmware)
>  - prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
> diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
> index 493692d838c6..d4e9fa2594f3 100644
> --- a/arch/arm/mm/cache-l2x0.c
> +++ b/arch/arm/mm/cache-l2x0.c
> @@ -1060,6 +1060,21 @@ static void __init l2x0_of_parse(const struct device_node *np,
>                 val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
>         }
>
> +       if (of_property_read_bool(np, "arm,parity-enable")) {
> +               mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
> +               val |= L2C_AUX_CTRL_PARITY_ENABLE;
> +       }
> +
> +       if (of_property_read_bool(np, "arm,eventmon-enable")) {
> +               mask &= ~L2C_AUX_CTRL_EVTMON_ENABLE;
> +               val |= L2C_AUX_CTRL_EVTMON_ENABLE;
> +       }
> +
> +       if (of_property_read_bool(np, "arm,shared-override")) {
> +               mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
> +               val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
> +       }
> +
>         ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
>         if (ret)
>                 return;
> --
> 2.4.3
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Linus Walleij Oct. 22, 2015, 12:57 p.m. UTC | #3
On Thu, Oct 15, 2015 at 3:57 PM, Russell King - ARM Linux
<linux@arm.linux.org.uk> wrote:
> On Thu, Oct 15, 2015 at 03:46:41PM +0200, Linus Walleij wrote:

>> +- arm,eventmon-enable : enable the event monitor on the L2 cache (PL220 only).
>
> I don't think we should introduce a DT property for this: if we support
> the event monitor, then the event monitor support code should be
> controlling this bit.

OK that's reasonable. I'll make a patch for the parity enable and think
about how to implement eventmonitor bit setting.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt
index 06c88a4d28ac..4d262e9b3464 100644
--- a/Documentation/devicetree/bindings/arm/l2cc.txt
+++ b/Documentation/devicetree/bindings/arm/l2cc.txt
@@ -67,12 +67,14 @@  Optional properties:
   disable if zero.
 - arm,prefetch-offset : Override prefetch offset value. Valid values are
   0-7, 15, 23, and 31.
-- arm,shared-override : The default behavior of the pl310 cache controller with
-  respect to the shareable attribute is to transform "normal memory
-  non-cacheable transactions" into "cacheable no allocate" (for reads) or
-  "write through no write allocate" (for writes).
+- arm,shared-override : The default behavior of the PL220 or PL310 cache
+  controllers with respect to the shareable attribute is to transform "normal
+  memory non-cacheable transactions" into "cacheable no allocate" (for reads)
+  or "write through no write allocate" (for writes).
   On systems where this may cause DMA buffer corruption, this property must be
   specified to indicate that such transforms are precluded.
+- arm,parity-enable : enable parity checking on the L2 cache (PL220 only).
+- arm,eventmon-enable : enable the event monitor on the L2 cache (PL220 only).
 - prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
   (forcibly enable), property absent (retain settings set by firmware)
 - prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 493692d838c6..d4e9fa2594f3 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -1060,6 +1060,21 @@  static void __init l2x0_of_parse(const struct device_node *np,
 		val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
 	}
 
+	if (of_property_read_bool(np, "arm,parity-enable")) {
+		mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
+		val |= L2C_AUX_CTRL_PARITY_ENABLE;
+	}
+
+	if (of_property_read_bool(np, "arm,eventmon-enable")) {
+		mask &= ~L2C_AUX_CTRL_EVTMON_ENABLE;
+		val |= L2C_AUX_CTRL_EVTMON_ENABLE;
+	}
+
+	if (of_property_read_bool(np, "arm,shared-override")) {
+		mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
+		val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
+	}
+
 	ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
 	if (ret)
 		return;