diff mbox series

[3/4] arm64: dts: qcom: add power domain for clk controller

Message ID 20220805074935.1158098-4-jun.nie@linaro.org
State New
Headers show
Series Support dynamic voltage frequency scaling inside clock controller | expand

Commit Message

Jun Nie Aug. 5, 2022, 7:49 a.m. UTC
Add RPM power domain for clk controller so that clock controller can
use it for dynamic voltage frequency scaling.

Also replace the RPM power domain value with defninition.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 05472510e29d..fdb32b3a23e8 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -312,22 +312,22 @@  rpmpd_opp_table: opp-table {
 						compatible = "operating-points-v2";
 
 						rpmpd_opp_ret: opp1 {
-							opp-level = <1>;
+							opp-level = <RPM_SMD_CORNER_RETENTION>;
 						};
 						rpmpd_opp_svs_krait: opp2 {
-							opp-level = <2>;
+							opp-level = <RPM_SMD_CORNER_SVS_KRAIT>;
 						};
 						rpmpd_opp_svs_soc: opp3 {
-							opp-level = <3>;
+							opp-level = <RPM_SMD_CORNER_SVS_SOC>;
 						};
 						rpmpd_opp_nom: opp4 {
-							opp-level = <4>;
+							opp-level = <RPM_SMD_CORNER_NORMAL>;
 						};
 						rpmpd_opp_turbo: opp5 {
-							opp-level = <5>;
+							opp-level = <RPM_SMD_CORNER_TURBO>;
 						};
 						rpmpd_opp_super_turbo: opp6 {
-							opp-level = <6>;
+							opp-level = <RPM_SMD_CORNER_SUPER_TURBO>;
 						};
 					};
 				};
@@ -933,6 +933,8 @@  gcc: clock-controller@1800000 {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
+			power-domains = <&rpmpd MSM8916_VDDCX>;
+			power-domain-names = "vdd";
 			reg = <0x01800000 0x80000>;
 		};