diff mbox series

[03/10] iommu/mediatek: Get regionid from larb/port id

Message ID 20230113060133.9394-4-yong.wu@mediatek.com
State New
Headers show
Series Adjust the dma-ranges for MTK IOMMU | expand

Commit Message

Yong Wu (吴勇) Jan. 13, 2023, 6:01 a.m. UTC
After commit f1ad5338a4d5 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges is not allowed for dts leaf node.
but we still would like to separate to different masters
into different iova regions.

Thus we have to separate it by the HW larbid and portid. For example,
larb1/2 are in region2 and larb3 is in region3. The problem is that
some ports inside a larb are in region4 while some ports inside this
larb are in region5. Therefore I define a "larb_region_msk" to help
record the information for each a port. Take a example for a larb:
 [1] = ~0: means all ports in this larb are in region1;
 [2] = BIT(3) | BIT(4): means port3/4 in this larb are region2;
 [3] = ~(BIT(3) | BIT(4)): means all the other ports except port3/4
                           in this larb are region3.

This method also avoid the users forget/abuse the iova regions.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 43 +++++++++++++++++++++------------------
 1 file changed, 23 insertions(+), 20 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 2badd6acfb23..d30020d0a190 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -8,7 +8,6 @@ 
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/device.h>
-#include <linux/dma-direct.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -194,6 +193,7 @@  struct mtk_iommu_plat_data {
 	enum mtk_iommu_plat	m4u_plat;
 	u32			flags;
 	u32			inv_sel_reg;
+	const u32		(*larb_region_msk)[32];
 
 	char			*pericfg_comp_str;
 	struct list_head	*hw_list;
@@ -508,30 +508,33 @@  static unsigned int mtk_iommu_get_bank_id(struct device *dev,
 static int mtk_iommu_get_iova_region_id(struct device *dev,
 					const struct mtk_iommu_plat_data *plat_data)
 {
-	const struct mtk_iommu_iova_region *rgn = plat_data->iova_region;
-	const struct bus_dma_region *dma_rgn = dev->dma_range_map;
-	int i, candidate = -1;
-	dma_addr_t dma_end;
+	struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+	unsigned int portidmsk = 0, larbid;
+	const u32 *rgn_larb_msk;
+	int i, region_id = -1;
 
-	if (!dma_rgn || plat_data->iova_region_nr == 1)
+	if (plat_data->iova_region_nr == 1)
 		return 0;
 
-	dma_end = dma_rgn->dma_start + dma_rgn->size - 1;
-	for (i = 0; i < plat_data->iova_region_nr; i++, rgn++) {
-		/* Best fit. */
-		if (dma_rgn->dma_start == rgn->iova_base &&
-		    dma_end == rgn->iova_base + rgn->size - 1)
-			return i;
-		/* ok if it is inside this region. */
-		if (dma_rgn->dma_start >= rgn->iova_base &&
-		    dma_end < rgn->iova_base + rgn->size)
-			candidate = i;
+	larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
+	for (i = 0; i < fwspec->num_ids; i++)
+		portidmsk |= BIT(MTK_M4U_TO_PORT(fwspec->ids[i]));
+
+	for (i = 0; i < plat_data->iova_region_nr; i++) {
+		rgn_larb_msk = plat_data->larb_region_msk[i];
+		if (!rgn_larb_msk)
+			continue;
+
+		if  ((rgn_larb_msk[larbid] & portidmsk) == portidmsk) {
+			region_id = i;
+			break;
+		}
 	}
 
-	if (candidate >= 0)
-		return candidate;
-	dev_err(dev, "Can NOT find the iommu domain id(%pad 0x%llx).\n",
-		&dma_rgn->dma_start, dma_rgn->size);
+	if (region_id >= 0)
+		return region_id;
+	dev_err(dev, "Can NOT find the region for larb(%d-%x).\n",
+		larbid, portidmsk);
 	return -EINVAL;
 }