diff mbox series

[4/4] powerpc/pseries: update SED for PLPKS api changes

Message ID 20230505194402.2079010-5-gjoyce@linux.vnet.ibm.com
State New
Headers show
Series generic and PowerPC SED Opal keystore | expand

Commit Message

Greg Joyce May 5, 2023, 7:44 p.m. UTC
From: Greg Joyce <gjoyce@linux.vnet.ibm.com>

Changes to the PLPKS API require minor updates to the SED Opal
PLPKS keystore code.

Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/pseries/Kconfig        |  6 +++++
 arch/powerpc/platforms/pseries/Makefile       |  2 +-
 .../powerpc/platforms/pseries/plpks_sed_ops.c | 22 +++++--------------
 block/Kconfig                                 |  1 +
 4 files changed, 13 insertions(+), 18 deletions(-)

Comments

Andrew Donnellan May 15, 2023, 5:52 a.m. UTC | #1
On Fri, 2023-05-05 at 14:44 -0500, gjoyce@linux.vnet.ibm.com wrote:
> From: Greg Joyce <gjoyce@linux.vnet.ibm.com>
> 
> Changes to the PLPKS API require minor updates to the SED Opal
> PLPKS keystore code.
> 
> Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>

[+ Nayna]

This patch will need to be squashed with patch 2.

> ---
>  arch/powerpc/platforms/pseries/Kconfig        |  6 +++++
>  arch/powerpc/platforms/pseries/Makefile       |  2 +-
>  .../powerpc/platforms/pseries/plpks_sed_ops.c | 22 +++++------------
> --
>  block/Kconfig                                 |  1 +
>  4 files changed, 13 insertions(+), 18 deletions(-)
> 
> diff --git a/arch/powerpc/platforms/pseries/Kconfig
> b/arch/powerpc/platforms/pseries/Kconfig
> index 21b22bf16ce6..c2f8a29e7b9b 100644
> --- a/arch/powerpc/platforms/pseries/Kconfig
> +++ b/arch/powerpc/platforms/pseries/Kconfig
> @@ -163,6 +163,12 @@ config PSERIES_PLPKS
>         # This option is selected by in-kernel consumers that require
>         # access to the PKS.
>  
> +config PSERIES_PLPKS_SED
> +       depends on PPC_PSERIES
> +       bool
> +       # This option is selected by in-kernel consumers that require
> +       # access to the SED PKS keystore.
> +
>  config PAPR_SCM
>         depends on PPC_PSERIES && MEMORY_HOTPLUG && LIBNVDIMM
>         tristate "Support for the PAPR Storage Class Memory
> interface"
> diff --git a/arch/powerpc/platforms/pseries/Makefile
> b/arch/powerpc/platforms/pseries/Makefile
> index 4242aed0d5d3..1476c5e4433c 100644
> --- a/arch/powerpc/platforms/pseries/Makefile
> +++ b/arch/powerpc/platforms/pseries/Makefile
> @@ -29,7 +29,7 @@ obj-$(CONFIG_PPC_SVM)         += svm.o
>  obj-$(CONFIG_FA_DUMP)          += rtas-fadump.o
>  obj-$(CONFIG_PSERIES_PLPKS)    += plpks.o
>  obj-$(CONFIG_PPC_SECURE_BOOT)  += plpks-secvar.o
> -obj-$(CONFIG_PSERIES_PLPKS_SED)        += plpks-sed.o
> +obj-$(CONFIG_PSERIES_PLPKS_SED)        += plpks_sed_ops.o

I think you could just use obj-$(CONFIG_BLK_SED_OPAL) and then there
wouldn't be a need to introduce a new option? Unless there's going to
be a second consumer.

>  obj-$(CONFIG_SUSPEND)          += suspend.o
>  obj-$(CONFIG_PPC_VAS)          += vas.o vas-sysfs.o
>  
> diff --git a/arch/powerpc/platforms/pseries/plpks_sed_ops.c
> b/arch/powerpc/platforms/pseries/plpks_sed_ops.c
> index 086934b319a9..c1d08075e850 100644
> --- a/arch/powerpc/platforms/pseries/plpks_sed_ops.c
> +++ b/arch/powerpc/platforms/pseries/plpks_sed_ops.c
> @@ -14,7 +14,7 @@
>  #include <linux/string.h>
>  #include <linux/ioctl.h>
>  #include <linux/sed-opal-key.h>
> -#include "plpks.h"
> +#include <asm/plpks.h>
>  
>  /*
>   * structure that contains all SED data
> @@ -28,9 +28,6 @@ struct plpks_sed_object_data {
>         u_char key[32];
>  };
>  
> -#define PLPKS_PLATVAR_POLICY            WORLDREADABLE
> -#define PLPKS_PLATVAR_OS_COMMON         4
> -
>  #define PLPKS_SED_OBJECT_DATA_V0        0
>  #define PLPKS_SED_MANGLED_LABEL         "/default/pri"
>  #define PLPKS_SED_COMPONENT             "sed-opal"
> @@ -50,8 +47,8 @@ void plpks_init_var(struct plpks_var *var, char
> *keyname)
>                 var->name = PLPKS_SED_MANGLED_LABEL;
>                 var->namelen = strlen(keyname);
>         }
> -       var->policy = PLPKS_PLATVAR_POLICY;
> -       var->os = PLPKS_PLATVAR_OS_COMMON;
> +       var->policy = PLPKS_WORLDREADABLE;
> +       var->os = PLPKS_VAR_COMMON;
>         var->data = NULL;
>         var->datalen = 0;
>         var->component = PLPKS_SED_COMPONENT;
> @@ -64,28 +61,19 @@ int sed_read_key(char *keyname, char *key, u_int
> *keylen)
>  {
>         struct plpks_var var;
>         struct plpks_sed_object_data data;
> -       u_int offset;
>         int ret;
>         u_int len;
>  
>         plpks_init_var(&var, keyname);
> -       var.data = &data;
> +       var.data = (u8 *)&data;
>         var.datalen = sizeof(data);
>  
>         ret = plpks_read_os_var(&var);
>         if (ret != 0)
>                 return ret;
>  
> -       offset = offsetof(struct plpks_sed_object_data, key);
> -       if (offset > var.datalen) {
> -               return -EINVAL;
> -       }
> -
> -       len = min(be32_to_cpu(data.key_len), *keylen);
> -
> +       len = min_t(u16, be32_to_cpu(data.key_len), var.datalen);
>         memcpy(key, data.key, len);
> -       kfree(var.data);
> -
>         key[len] = '\0';
>         *keylen = len;
>  
> diff --git a/block/Kconfig b/block/Kconfig
> index 76b23114fdeb..75d4db34df5a 100644
> --- a/block/Kconfig
> +++ b/block/Kconfig
> @@ -182,6 +182,7 @@ config BLK_SED_OPAL
>         bool "Logic for interfacing with Opal enabled SEDs"
>         depends on KEYS
>         select PSERIES_PLPKS if PPC_PSERIES
> +       select PSERIES_PLPKS_SED if PPC_PSERIES
>         help
>         Builds Logic for interfacing with Opal enabled controllers.
>         Enabling this option enables users to setup/unlock/lock
Greg Joyce June 1, 2023, 2:27 p.m. UTC | #2
On Mon, 2023-05-15 at 15:52 +1000, Andrew Donnellan wrote:
> On Fri, 2023-05-05 at 14:44 -0500, gjoyce@linux.vnet.ibm.com wrote:
> > From: Greg Joyce <gjoyce@linux.vnet.ibm.com>
> > 
> > Changes to the PLPKS API require minor updates to the SED Opal
> > PLPKS keystore code.
> > 
> > Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
> 
> [+ Nayna]
> 
> This patch will need to be squashed with patch 2.

Thanks. I've squashed the patches and will resend shortly.

> 
> > ---
> >  arch/powerpc/platforms/pseries/Kconfig        |  6 +++++
> >  arch/powerpc/platforms/pseries/Makefile       |  2 +-
> >  .../powerpc/platforms/pseries/plpks_sed_ops.c | 22 +++++--------
> > ----
> > --
> >  block/Kconfig                                 |  1 +
> >  4 files changed, 13 insertions(+), 18 deletions(-)
> > 
> > diff --git a/arch/powerpc/platforms/pseries/Kconfig
> > b/arch/powerpc/platforms/pseries/Kconfig
> > index 21b22bf16ce6..c2f8a29e7b9b 100644
> > --- a/arch/powerpc/platforms/pseries/Kconfig
> > +++ b/arch/powerpc/platforms/pseries/Kconfig
> > @@ -163,6 +163,12 @@ config PSERIES_PLPKS
> >         # This option is selected by in-kernel consumers that
> > require
> >         # access to the PKS.
> >  
> > +config PSERIES_PLPKS_SED
> > +       depends on PPC_PSERIES
> > +       bool
> > +       # This option is selected by in-kernel consumers that
> > require
> > +       # access to the SED PKS keystore.
> > +
> >  config PAPR_SCM
> >         depends on PPC_PSERIES && MEMORY_HOTPLUG && LIBNVDIMM
> >         tristate "Support for the PAPR Storage Class Memory
> > interface"
> > diff --git a/arch/powerpc/platforms/pseries/Makefile
> > b/arch/powerpc/platforms/pseries/Makefile
> > index 4242aed0d5d3..1476c5e4433c 100644
> > --- a/arch/powerpc/platforms/pseries/Makefile
> > +++ b/arch/powerpc/platforms/pseries/Makefile
> > @@ -29,7 +29,7 @@ obj-$(CONFIG_PPC_SVM)         += svm.o
> >  obj-$(CONFIG_FA_DUMP)          += rtas-fadump.o
> >  obj-$(CONFIG_PSERIES_PLPKS)    += plpks.o
> >  obj-$(CONFIG_PPC_SECURE_BOOT)  += plpks-secvar.o
> > -obj-$(CONFIG_PSERIES_PLPKS_SED)        += plpks-sed.o
> > +obj-$(CONFIG_PSERIES_PLPKS_SED)        += plpks_sed_ops.o
> 
> I think you could just use obj-$(CONFIG_BLK_SED_OPAL) and then there
> wouldn't be a need to introduce a new option? Unless there's going to
> be a second consumer.

I was following the model of CONFIG_PPC_SECURE_BOOT. That gives a
littler finer control and flexibilty for using SED and PLPKS. This also
confines use of CONFIG_BLK_SED_OPAL to the base SED OPAL code.

> 
> >  obj-$(CONFIG_SUSPEND)          += suspend.o
> >  obj-$(CONFIG_PPC_VAS)          += vas.o vas-sysfs.o
> >  
> > diff --git a/arch/powerpc/platforms/pseries/plpks_sed_ops.c
> > b/arch/powerpc/platforms/pseries/plpks_sed_ops.c
> > index 086934b319a9..c1d08075e850 100644
> > --- a/arch/powerpc/platforms/pseries/plpks_sed_ops.c
> > +++ b/arch/powerpc/platforms/pseries/plpks_sed_ops.c
> > @@ -14,7 +14,7 @@
> >  #include <linux/string.h>
> >  #include <linux/ioctl.h>
> >  #include <linux/sed-opal-key.h>
> > -#include "plpks.h"
> > +#include <asm/plpks.h>
> >  
> >  /*
> >   * structure that contains all SED data
> > @@ -28,9 +28,6 @@ struct plpks_sed_object_data {
> >         u_char key[32];
> >  };
> >  
> > -#define PLPKS_PLATVAR_POLICY            WORLDREADABLE
> > -#define PLPKS_PLATVAR_OS_COMMON         4
> > -
> >  #define PLPKS_SED_OBJECT_DATA_V0        0
> >  #define PLPKS_SED_MANGLED_LABEL         "/default/pri"
> >  #define PLPKS_SED_COMPONENT             "sed-opal"
> > @@ -50,8 +47,8 @@ void plpks_init_var(struct plpks_var *var, char
> > *keyname)
> >                 var->name = PLPKS_SED_MANGLED_LABEL;
> >                 var->namelen = strlen(keyname);
> >         }
> > -       var->policy = PLPKS_PLATVAR_POLICY;
> > -       var->os = PLPKS_PLATVAR_OS_COMMON;
> > +       var->policy = PLPKS_WORLDREADABLE;
> > +       var->os = PLPKS_VAR_COMMON;
> >         var->data = NULL;
> >         var->datalen = 0;
> >         var->component = PLPKS_SED_COMPONENT;
> > @@ -64,28 +61,19 @@ int sed_read_key(char *keyname, char *key,
> > u_int
> > *keylen)
> >  {
> >         struct plpks_var var;
> >         struct plpks_sed_object_data data;
> > -       u_int offset;
> >         int ret;
> >         u_int len;
> >  
> >         plpks_init_var(&var, keyname);
> > -       var.data = &data;
> > +       var.data = (u8 *)&data;
> >         var.datalen = sizeof(data);
> >  
> >         ret = plpks_read_os_var(&var);
> >         if (ret != 0)
> >                 return ret;
> >  
> > -       offset = offsetof(struct plpks_sed_object_data, key);
> > -       if (offset > var.datalen) {
> > -               return -EINVAL;
> > -       }
> > -
> > -       len = min(be32_to_cpu(data.key_len), *keylen);
> > -
> > +       len = min_t(u16, be32_to_cpu(data.key_len), var.datalen);
> >         memcpy(key, data.key, len);
> > -       kfree(var.data);
> > -
> >         key[len] = '\0';
> >         *keylen = len;
> >  
> > diff --git a/block/Kconfig b/block/Kconfig
> > index 76b23114fdeb..75d4db34df5a 100644
> > --- a/block/Kconfig
> > +++ b/block/Kconfig
> > @@ -182,6 +182,7 @@ config BLK_SED_OPAL
> >         bool "Logic for interfacing with Opal enabled SEDs"
> >         depends on KEYS
> >         select PSERIES_PLPKS if PPC_PSERIES
> > +       select PSERIES_PLPKS_SED if PPC_PSERIES
> >         help
> >         Builds Logic for interfacing with Opal enabled controllers.
> >         Enabling this option enables users to setup/unlock/lock
diff mbox series

Patch

diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 21b22bf16ce6..c2f8a29e7b9b 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -163,6 +163,12 @@  config PSERIES_PLPKS
 	# This option is selected by in-kernel consumers that require
 	# access to the PKS.
 
+config PSERIES_PLPKS_SED
+	depends on PPC_PSERIES
+	bool
+	# This option is selected by in-kernel consumers that require
+	# access to the SED PKS keystore.
+
 config PAPR_SCM
 	depends on PPC_PSERIES && MEMORY_HOTPLUG && LIBNVDIMM
 	tristate "Support for the PAPR Storage Class Memory interface"
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 4242aed0d5d3..1476c5e4433c 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -29,7 +29,7 @@  obj-$(CONFIG_PPC_SVM)		+= svm.o
 obj-$(CONFIG_FA_DUMP)		+= rtas-fadump.o
 obj-$(CONFIG_PSERIES_PLPKS)	+= plpks.o
 obj-$(CONFIG_PPC_SECURE_BOOT)	+= plpks-secvar.o
-obj-$(CONFIG_PSERIES_PLPKS_SED)	+= plpks-sed.o
+obj-$(CONFIG_PSERIES_PLPKS_SED)	+= plpks_sed_ops.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o
 obj-$(CONFIG_PPC_VAS)		+= vas.o vas-sysfs.o
 
diff --git a/arch/powerpc/platforms/pseries/plpks_sed_ops.c b/arch/powerpc/platforms/pseries/plpks_sed_ops.c
index 086934b319a9..c1d08075e850 100644
--- a/arch/powerpc/platforms/pseries/plpks_sed_ops.c
+++ b/arch/powerpc/platforms/pseries/plpks_sed_ops.c
@@ -14,7 +14,7 @@ 
 #include <linux/string.h>
 #include <linux/ioctl.h>
 #include <linux/sed-opal-key.h>
-#include "plpks.h"
+#include <asm/plpks.h>
 
 /*
  * structure that contains all SED data
@@ -28,9 +28,6 @@  struct plpks_sed_object_data {
 	u_char key[32];
 };
 
-#define PLPKS_PLATVAR_POLICY            WORLDREADABLE
-#define PLPKS_PLATVAR_OS_COMMON         4
-
 #define PLPKS_SED_OBJECT_DATA_V0        0
 #define PLPKS_SED_MANGLED_LABEL         "/default/pri"
 #define PLPKS_SED_COMPONENT             "sed-opal"
@@ -50,8 +47,8 @@  void plpks_init_var(struct plpks_var *var, char *keyname)
 		var->name = PLPKS_SED_MANGLED_LABEL;
 		var->namelen = strlen(keyname);
 	}
-	var->policy = PLPKS_PLATVAR_POLICY;
-	var->os = PLPKS_PLATVAR_OS_COMMON;
+	var->policy = PLPKS_WORLDREADABLE;
+	var->os = PLPKS_VAR_COMMON;
 	var->data = NULL;
 	var->datalen = 0;
 	var->component = PLPKS_SED_COMPONENT;
@@ -64,28 +61,19 @@  int sed_read_key(char *keyname, char *key, u_int *keylen)
 {
 	struct plpks_var var;
 	struct plpks_sed_object_data data;
-	u_int offset;
 	int ret;
 	u_int len;
 
 	plpks_init_var(&var, keyname);
-	var.data = &data;
+	var.data = (u8 *)&data;
 	var.datalen = sizeof(data);
 
 	ret = plpks_read_os_var(&var);
 	if (ret != 0)
 		return ret;
 
-	offset = offsetof(struct plpks_sed_object_data, key);
-	if (offset > var.datalen) {
-		return -EINVAL;
-	}
-
-	len = min(be32_to_cpu(data.key_len), *keylen);
-
+	len = min_t(u16, be32_to_cpu(data.key_len), var.datalen);
 	memcpy(key, data.key, len);
-	kfree(var.data);
-
 	key[len] = '\0';
 	*keylen = len;
 
diff --git a/block/Kconfig b/block/Kconfig
index 76b23114fdeb..75d4db34df5a 100644
--- a/block/Kconfig
+++ b/block/Kconfig
@@ -182,6 +182,7 @@  config BLK_SED_OPAL
 	bool "Logic for interfacing with Opal enabled SEDs"
 	depends on KEYS
 	select PSERIES_PLPKS if PPC_PSERIES
+	select PSERIES_PLPKS_SED if PPC_PSERIES
 	help
 	Builds Logic for interfacing with Opal enabled controllers.
 	Enabling this option enables users to setup/unlock/lock