diff mbox series

[4/9] lpfc: Revise NPIV ELS unsol rcv cmpl logic to drop ndlp based on nlp_state

Message ID 20230523183206.7728-5-justintee8345@gmail.com
State New
Headers show
Series lpfc: Update lpfc to revision 14.2.0.13 | expand

Commit Message

Justin Tee May 23, 2023, 6:32 p.m. UTC
When NPIV ports are zoned to devices that support both initiator and target
mode, a remote device's initiated PRLI results in unintended final kref
clean up of the device's ndlp structure.  This disrupts NPIV ports'
discovery for target devices that support both initiator and target mode.

Modify the NPIV lpfc_drop_node clause such that we allow the ndlp to live
so long as it was in NLP_STE_PLOGI_ISSUE, NLP_STE_REG_LOGIN_ISSUE, or
NLP_STE_PRLI_ISSUE nlp_state.  This allows lpfc's issued PRLI completion
routine to determine if the final kref clean up should execute rather than
a remote device's issued PRLI.

Fixes: db651ec22524 ("scsi: lpfc: Correct used_rpi count when devloss tmo fires with no recovery")

Signed-off-by: Justin Tee <justin.tee@broadcom.com>
---
 drivers/scsi/lpfc/lpfc_els.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index a3c8550e9985..2bad9954c355 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -5452,9 +5452,19 @@  lpfc_cmpl_els_rsp(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 				ndlp->nlp_flag &= ~NLP_RELEASE_RPI;
 				spin_unlock_irq(&ndlp->lock);
 			}
+			lpfc_drop_node(vport, ndlp);
+		} else if (ndlp->nlp_state != NLP_STE_PLOGI_ISSUE &&
+			   ndlp->nlp_state != NLP_STE_REG_LOGIN_ISSUE &&
+			   ndlp->nlp_state != NLP_STE_PRLI_ISSUE) {
+			/* Drop ndlp if there is no planned or outstanding
+			 * issued PRLI.
+			 *
+			 * In cases when the ndlp is acting as both an initiator
+			 * and target function, let our issued PRLI determine
+			 * the final ndlp kref drop.
+			 */
+			lpfc_drop_node(vport, ndlp);
 		}
-
-		lpfc_drop_node(vport, ndlp);
 	}
 
 	/* Release the originating I/O reference. */