diff mbox series

[05/10] firewall: introduce stm32_firewall framework

Message ID 20230705172759.1610753-6-gatien.chevallier@foss.st.com
State New
Headers show
Series Introduce STM32 Firewall framework | expand

Commit Message

Gatien CHEVALLIER July 5, 2023, 5:27 p.m. UTC
Introduce a firewall framework that offers to firewall consumers different
firewall services such as the ability to check their access rights against
their firewall controller(s).

The firewall framework offers a generic API that is defined in firewall
controllers drivers to best fit the specificity of each firewall.

There are various types of firewalls:
-Peripheral firewalls that filter accesses to peripherals
-Memory firewalls that filter accesses to memories or memory regions
-Resource firewalls that filter accesses to internal resources such as
reset and clock controllers

A firewall controller must be probed at arch_initcall level and register
to the framework so that consumers can use their services.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
---
 MAINTAINERS                               |   5 +
 arch/arm64/Kconfig.platforms              |   1 +
 drivers/bus/Kconfig                       |  10 +
 drivers/bus/Makefile                      |   1 +
 drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
 drivers/bus/stm32_firewall.h              |  83 +++++++
 include/linux/bus/stm32_firewall_device.h | 134 ++++++++++++
 7 files changed, 486 insertions(+)
 create mode 100644 drivers/bus/stm32_firewall.c
 create mode 100644 drivers/bus/stm32_firewall.h
 create mode 100644 include/linux/bus/stm32_firewall_device.h

Comments

Rob Herring (Arm) July 6, 2023, 3:09 p.m. UTC | #1
On Wed, Jul 05, 2023 at 07:27:54PM +0200, Gatien Chevallier wrote:
> Introduce a firewall framework that offers to firewall consumers different
> firewall services such as the ability to check their access rights against
> their firewall controller(s).
> 
> The firewall framework offers a generic API that is defined in firewall
> controllers drivers to best fit the specificity of each firewall.
> 
> There are various types of firewalls:
> -Peripheral firewalls that filter accesses to peripherals
> -Memory firewalls that filter accesses to memories or memory regions
> -Resource firewalls that filter accesses to internal resources such as
> reset and clock controllers

How do resource firewalls work? Access to registers for some clocks in a 
clock controller are disabled? Or something gates off clocks/resets to 
a block?

It might make more sense for "resource" accesses to be managed within 
those resource APIs (i.e. the clock and reset frameworks) and leave this 
framework to bus accesses.

> A firewall controller must be probed at arch_initcall level and register
> to the framework so that consumers can use their services.

initcall ordering hacks should not be needed. We have both deferred 
probe and fw_devlinks to avoid that problem.

> 
> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
> ---
>  MAINTAINERS                               |   5 +
>  arch/arm64/Kconfig.platforms              |   1 +
>  drivers/bus/Kconfig                       |  10 +
>  drivers/bus/Makefile                      |   1 +
>  drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
>  drivers/bus/stm32_firewall.h              |  83 +++++++

Why something stm32 specific? We know there are multiple platforms 
wanting something in this area. Wasn't the last attempt common?

For a common binding, I'm not eager to accept anything new with only 1 
user. 

>  include/linux/bus/stm32_firewall_device.h | 134 ++++++++++++
>  7 files changed, 486 insertions(+)
>  create mode 100644 drivers/bus/stm32_firewall.c
>  create mode 100644 drivers/bus/stm32_firewall.h
>  create mode 100644 include/linux/bus/stm32_firewall_device.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 41385f01fa98..fabf95ba9b86 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20123,6 +20123,11 @@ T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
>  F:	drivers/media/i2c/st-mipid02.c
>  
> +ST STM32 FIREWALL
> +M:	Gatien Chevallier <gatien.chevallier@foss.st.com>
> +S:	Maintained
> +F:	drivers/bus/stm32_firewall.c
> +
>  ST STM32 I2C/SMBUS DRIVER
>  M:	Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
>  M:	Alain Volmat <alain.volmat@foss.st.com>
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index 6069120199bb..5a46e90f1e4e 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -293,6 +293,7 @@ config ARCH_STM32
>  	select ARM_SMC_MBOX
>  	select ARM_SCMI_PROTOCOL
>  	select COMMON_CLK_SCMI
> +	select STM32_FIREWALL
>  	help
>  	  This enables support for ARMv8 based STMicroelectronics
>  	  STM32 family, including:
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> index fcfa280df98a..4d54a7ea52b2 100644
> --- a/drivers/bus/Kconfig
> +++ b/drivers/bus/Kconfig
> @@ -163,6 +163,16 @@ config QCOM_SSC_BLOCK_BUS
>  	  i2c/spi/uart controllers, a hexagon core, and a clock controller
>  	  which provides clocks for the above.
>  
> +config STM32_FIREWALL
> +	bool "STM32 Firewall framework"
> +	depends on ARCH_STM32
> +	default MACH_STM32MP157 || MACH_STM32MP13 || MACH_STM32MP25
> +	help
> +	  Say y to enable firewall framework and its services. Firewall
> +	  controllers will be able to register to the framework. Firewall
> +	  controllers must be initialized and register to the firewall framework
> +	  at arch_initcall level.
> +
>  config SUN50I_DE2_BUS
>  	bool "Allwinner A64 DE2 Bus Driver"
>  	  default ARM64
> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
> index d90eed189a65..fc0511450ec2 100644
> --- a/drivers/bus/Makefile
> +++ b/drivers/bus/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
>  obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
>  obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
>  obj-$(CONFIG_QCOM_SSC_BLOCK_BUS)	+= qcom-ssc-block-bus.o
> +obj-$(CONFIG_STM32_FIREWALL)	+= stm32_firewall.o
>  obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
>  obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
>  obj-$(CONFIG_OF)		+= simple-pm-bus.o
> diff --git a/drivers/bus/stm32_firewall.c b/drivers/bus/stm32_firewall.c
> new file mode 100644
> index 000000000000..510db5bc6eaf
> --- /dev/null
> +++ b/drivers/bus/stm32_firewall.c
> @@ -0,0 +1,252 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later

The default kernel license is GPL-2.0-only. Why the deviation?

> +/*
> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/bus/stm32_firewall_device.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +
> +#include "stm32_firewall.h"
> +
> +/* Corresponds to STM32_FIREWALL_MAX_EXTRA_ARGS + firewall controller reference + firewall ID */
> +#define STM32_FIREWALL_MAX_ARGS		(STM32_FIREWALL_MAX_EXTRA_ARGS + 2)
> +
> +static LIST_HEAD(firewall_controller_list);
> +static DEFINE_MUTEX(firewall_controller_list_lock);
> +
> +static int stm32_firewall_get_id(struct device_node *np, u32 *id)
> +{
> +	u32 feature_domain_cell[2];
> +
> +	/* Get property from device node */
> +	if (of_property_read_u32_array(np, "feature-domains",
> +				       feature_domain_cell,
> +				       ARRAY_SIZE(feature_domain_cell))) {
> +		pr_err("Unable to find get firewall ID property\n");
> +		return -ENODEV;
> +	}
> +
> +	*id = feature_domain_cell[1];
> +
> +	return 0;
> +}
> +
> +/* Firewall device API */
> +
> +int stm32_firewall_get_firewall(struct device_node *np,
> +				struct stm32_firewall *firewall)
> +{
> +	struct stm32_firewall_controller *ctrl;
> +	struct of_phandle_args args;
> +	u32 controller_phandle;
> +	bool match = false;
> +	size_t i;
> +	int err;
> +
> +	if (!firewall)
> +		return -EINVAL;
> +
> +	/* The controller phandle is always the first argument of the feature-domains property. */
> +	err = of_property_read_u32(np, "feature-domains", &controller_phandle);

Why do you need to parse the property twice?

> +	if (err) {
> +		pr_err("Unable to get feature-domains property for node %s\n", np->full_name);
> +		return err;
> +	}
> +
> +	/* Parse property with phandle parsed out */
> +	err = of_parse_phandle_with_args(np, "feature-domains", "#feature-domain-cells", 0, &args);
> +	if (err) {
> +		pr_err("Unable to read feature-domains arguments for node %s\n", np->full_name);
> +		return err;
> +	}
> +
> +	/* The phandle is parsed out */
> +	if (args.args_count > STM32_FIREWALL_MAX_ARGS - 1)
> +		return -EINVAL;
> +
> +	of_node_put(np);
> +
> +	/* Check if the parsed phandle corresponds to a registered firewall controller */
> +	mutex_lock(&firewall_controller_list_lock);
> +	list_for_each_entry(ctrl, &firewall_controller_list, entry) {
> +		if (ctrl->dev->of_node->phandle == controller_phandle) {
> +			match = true;
> +			firewall->firewall_ctrl = ctrl;
> +			break;
> +		}
> +	}
> +	mutex_unlock(&firewall_controller_list_lock);
> +	if (!match) {
> +		firewall->firewall_ctrl = NULL;
> +		pr_err("No firewall controller registered for %s\n", np->full_name);
> +		return -ENODEV;
> +	}
> +
> +	/*
> +	 * The firewall ID is always the second argument of the feature-domains property.
> +	 * The first argument is already parsed out, so args.args[0] is the second argument.
> +	 */
> +	firewall->firewall_id = args.args[0];
> +
> +	/* Extra args start at the third argument */
> +	for (i = 0; i < args.args_count; i++)
> +		firewall->extra_args[i] = args.args[i + 1];
> +
> +	/* Remove the firewall ID arg that is not an extra argument */
> +	if (args.args_count >= 1)
> +		firewall->extra_args_size = args.args_count - 1;
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(stm32_firewall_get_firewall);
> +
> +int stm32_firewall_grant_access(struct stm32_firewall *firewall)
> +{
> +	struct stm32_firewall_controller *firewall_controller;
> +
> +	if (!firewall || firewall->firewall_id == U32_MAX)
> +		return -EINVAL;
> +
> +	firewall_controller = firewall->firewall_ctrl;
> +
> +	if (!firewall_controller)
> +		return -ENODEV;
> +
> +	return firewall_controller->grant_access(firewall_controller, firewall->firewall_id);
> +}
> +EXPORT_SYMBOL_GPL(stm32_firewall_grant_access);
> +
> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
> +{
> +	struct stm32_firewall_controller *firewall_controller;
> +
> +	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX)
> +		return -EINVAL;
> +
> +	firewall_controller = firewall->firewall_ctrl;
> +
> +	if (!firewall_controller)
> +		return -ENODEV;
> +
> +	return firewall_controller->grant_access(firewall_controller, subsystem_id);
> +}
> +EXPORT_SYMBOL_GPL(stm32_firewall_grant_access_by_id);
> +
> +void stm32_firewall_release_access(struct stm32_firewall *firewall)
> +{
> +	struct stm32_firewall_controller *firewall_controller;
> +
> +	if (!firewall || firewall->firewall_id == U32_MAX) {
> +		pr_err("Incorrect arguments when releasing a firewall access");
> +		return;
> +	}
> +
> +	firewall_controller = firewall->firewall_ctrl;
> +
> +	if (!firewall_controller) {
> +		pr_debug("No firewall controller to release");
> +		return;
> +	}
> +
> +	firewall_controller->release_access(firewall_controller, firewall->firewall_id);
> +}
> +EXPORT_SYMBOL_GPL(stm32_firewall_release_access);
> +
> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
> +{
> +	struct stm32_firewall_controller *firewall_controller;
> +
> +	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX) {
> +		pr_err("Incorrect arguments when releasing a firewall access");
> +		return;
> +	}
> +
> +	firewall_controller = firewall->firewall_ctrl;
> +
> +	if (!firewall_controller) {
> +		pr_debug("No firewall controller to release");
> +		return;
> +	}
> +
> +	firewall_controller->release_access(firewall_controller, subsystem_id);
> +}
> +EXPORT_SYMBOL_GPL(stm32_firewall_release_access_by_id);
> +
> +/* Firewall controller API */
> +
> +int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller)
> +{
> +	pr_info("Registering firewall controller %s", dev_name(firewall_controller->dev));
> +
> +	if (!firewall_controller)
> +		return -ENODEV;
> +
> +	mutex_lock(&firewall_controller_list_lock);
> +	list_add_tail(&firewall_controller->entry, &firewall_controller_list);
> +	mutex_unlock(&firewall_controller_list_lock);
> +
> +	return 0;
> +
> +}
> +
> +void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller)
> +{
> +	struct stm32_firewall_controller *ctrl, *tmp;
> +	bool controller_removed = false;
> +
> +	if (!firewall_controller) {
> +		pr_debug("Null reference while unregistering firewall controller");
> +		return;
> +	}
> +
> +	mutex_lock(&firewall_controller_list_lock);
> +	list_for_each_entry_safe(ctrl, tmp, &firewall_controller_list, entry) {
> +		if (ctrl == firewall_controller) {
> +			controller_removed = true;
> +			list_del_init(&ctrl->entry);
> +			break;
> +		}
> +	}
> +	mutex_unlock(&firewall_controller_list_lock);
> +
> +	if (!controller_removed)
> +		pr_debug("There was no firewall controller named %s to unregister",
> +			 dev_name(firewall_controller->dev));
> +}
> +
> +void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller)
> +{
> +	struct device_node *child;
> +	struct device *parent;
> +	u32 firewall_id;
> +	int err;
> +
> +	parent = firewall_controller->dev;
> +
> +	dev_dbg(parent, "Populating %s system bus\n", dev_name(firewall_controller->dev));
> +
> +	for_each_available_child_of_node(dev_of_node(parent), child) {
> +		err = stm32_firewall_get_id(child, &firewall_id);
> +		if (err < 0 ||
> +		    firewall_controller->grant_access(firewall_controller, firewall_id)) {
> +			/*
> +			 * Peripheral access not allowed or not defined.
> +			 * Mark the node as populated so platform bus won't probe it
> +			 */
> +			of_node_set_flag(child, OF_POPULATED);
> +			dev_err(parent, "%s: Device driver will not be probed\n",
> +				child->full_name);
> +		}
> +	}
> +}
> diff --git a/drivers/bus/stm32_firewall.h b/drivers/bus/stm32_firewall.h
> new file mode 100644
> index 000000000000..8d92e8c1ab77
> --- /dev/null
> +++ b/drivers/bus/stm32_firewall.h
> @@ -0,0 +1,83 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
> + */
> +
> +#ifndef _STM32_FIREWALL_H
> +#define _STM32_FIREWALL_H
> +
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +
> +/**
> + * STM32_PERIPHERAL_FIREWALL:		This type of firewall protects peripherals
> + * STM32_MEMORY_FIREWALL:		This type of firewall protects memories/subsets of memory
> + *					zones
> + * STM32_RESOURCE_FIREWALL:		This type of firewall protects internal resources
> + * STM32_NOTYPE_FIREWALL:		Undefined firewall type
> + */
> +
> +#define STM32_PERIPHERAL_FIREWALL	BIT(1)
> +#define STM32_MEMORY_FIREWALL		BIT(2)
> +#define STM32_RESOURCE_FIREWALL		BIT(3)
> +#define STM32_NOTYPE_FIREWALL		BIT(4)
> +
> +/**
> + * struct stm32_firewall_controller - Information on firewall controller supplying services
> + *
> + * @name			Name of the firewall controller
> + * @dev				Device reference of the firewall controller
> + * @mmio			Base address of the firewall controller
> + * @entry			List entry of the firewall controller list
> + * @type			Type of firewall
> + * @max_entries			Number of entries covered by the firewall
> + * @grant_access		Callback used to grant access for a device access against a
> + *				firewall controller
> + * @release_access		Callback used to release resources taken by a device when access was
> + *				granted
> + * @grant_memory_range_access	Callback used to grant access for a device to a given memory region
> + */
> +struct stm32_firewall_controller {
> +	const char *name;
> +	struct device *dev;
> +	void __iomem *mmio;
> +	struct list_head entry;
> +	unsigned int type;
> +	unsigned int max_entries;
> +
> +	int (*grant_access)(struct stm32_firewall_controller *ctrl, u32 id);
> +	void (*release_access)(struct stm32_firewall_controller *ctrl, u32 id);
> +	int (*grant_memory_range_access)(struct stm32_firewall_controller *ctrl, phys_addr_t paddr,
> +					 size_t size);
> +};
> +
> +/**
> + * int stm32_firewall_controller_register - Register a firewall controller to the STM32 firewall
> + *					    framework
> + * @firewall_controller		Firewall controller to register
> + *
> + * Returns 0 in case of success or -ENODEV if no controller was given.
> + */
> +int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller);
> +
> +/**
> + * int stm32_firewall_controller_unregister - Unregister a firewall controller from the STM32
> + *					      firewall framework
> + * @firewall_controller		Firewall controller to unregister
> + */
> +void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller);
> +
> +/**
> + * stm32_firewall_populate_bus - Populate device tree nodes that have a correct firewall
> + *				 configuration. This is used at boot-time only, as a sanity check
> + *				 between device tree and firewalls hardware configurations to
> + *				 prevent a kernel crash when a device driver is not granted access
> + *
> + * @firewall_controller		Firewall controller which nodes will be populated or not
> + */
> +void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller);
> +
> +#endif /* _STM32_FIREWALL_H */
> diff --git a/include/linux/bus/stm32_firewall_device.h b/include/linux/bus/stm32_firewall_device.h
> new file mode 100644
> index 000000000000..ccaecea7fc6c
> --- /dev/null
> +++ b/include/linux/bus/stm32_firewall_device.h
> @@ -0,0 +1,134 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
> + */
> +
> +#ifndef STM32_FIREWALL_DEVICE_H
> +#define STM32_FIREWALL_DEVICE_H
> +
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +
> +#define STM32_FIREWALL_MAX_EXTRA_ARGS		5
> +
> +/* Opaque reference to stm32_firewall_controller */
> +struct stm32_firewall_controller;
> +
> +/**
> + * stm32_firewall - Information on a device's firewall. Each device can have more than one firewall.
> + *
> + * @firewall_ctrl		Pointer referencing a firewall controller of the device. It is
> + *				opaque so a device cannot manipulate the controller's ops or access
> + *				the controller's data
> + * @extra_args			Extra arguments that are implementation dependent
> + * @extra_args_size		Number of extra arguments
> + * @firewall_id			Firewall ID associated the device for this firewall controller
> + */
> +struct stm32_firewall {
> +	struct stm32_firewall_controller *firewall_ctrl;
> +	u32 extra_args[STM32_FIREWALL_MAX_EXTRA_ARGS];
> +	size_t extra_args_size;
> +	u32 firewall_id;
> +};
> +
> +#if IS_ENABLED(CONFIG_STM32_FIREWALL)
> +/**
> + * stm32_firewall_get_firewall - Get the firewall(s) associated to given device.
> + *				 The firewall controller reference is always the first argument
> + *				 of the feature-domains property.
> + *				 The firewall ID is always the second argument of the
> + *				 feature-domains property.
> + *
> + * @np				Device node to parse
> + * @firewall			Resulting firewall reference(s)
> + *
> + * Returns 0 on success, -ENODEV if there's no match with a firewall controller or appropriate errno
> + * code if error occurred.
> + */
> +int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall);
> +
> +/**
> + * stm32_firewall_grant_access - Request firewall access rights and grant access.
> + *
> + * @firewall			Firewall reference containing the ID to check against its firewall
> + *				controller
> + *
> + * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
> + * appropriate errno code if error occurred
> + */
> +int stm32_firewall_grant_access(struct stm32_firewall *firewall);
> +
> +/**
> + * stm32_firewall_release_access - Release access granted from a call to
> + *				   stm32_firewall_grant_access().
> + *
> + * @firewall			Firewall reference containing the ID to check against its firewall
> + *				controller
> + */
> +void stm32_firewall_release_access(struct stm32_firewall *firewall);
> +
> +/**
> + * stm32_firewall_grant_access_by_id - Request firewall access rights of a given device
> + *				       based on a specific firewall ID
> + *
> + * Warnings:
> + * There is no way to ensure that the given ID will correspond to the firewall referenced in the
> + * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
> + * function must be used with caution.
> + * This function should be used for subsystem resources that do not have the same firewall ID
> + * as their parent.
> + * U32_MAX is an invalid ID.
> + *
> + * @firewall			Firewall reference containing the firewall controller
> + * @subsystem_id		Firewall ID of the subsystem resource
> + *
> + * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
> + * appropriate errno code if error occurred
> + */
> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);
> +
> +/**
> + * stm32_firewall_release_access_by_id - Release access granted from a call to
> + *					 stm32_firewall_grant_access_by_id().
> + *
> + * Warnings:
> + * There is no way to ensure that the given ID will correspond to the firewall referenced in the
> + * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
> + * function must be used with caution.
> + * This function should be used for subsystem resources that do not have the same firewall ID
> + * as their parent.
> + * U32_MAX is an invalid ID.
> + *
> + * @firewall			Firewall reference containing the firewall controller
> + * @subsystem_id		Firewall ID of the subsystem resource
> + */
> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);
> +
> +#else /* CONFIG_STM32_FIREWALL */
> +
> +int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall)
> +{
> +	return -ENODEV;
> +}
> +
> +int stm32_firewall_grant_access(struct stm32_firewall *firewall)
> +{
> +	return -ENODEV;
> +}
> +
> +void stm32_firewall_release_access(struct stm32_firewall *firewall)
> +{
> +}
> +
> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
> +{
> +	return -ENODEV;
> +}
> +
> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
> +{
> +}
> +
> +#endif /* CONFIG_STM32_FIREWALL */
> +#endif /* STM32_FIREWALL_DEVICE_H */
> -- 
> 2.25.1
>
Greg Kroah-Hartman July 7, 2023, 10:37 a.m. UTC | #2
On Wed, Jul 05, 2023 at 07:27:54PM +0200, Gatien Chevallier wrote:
> Introduce a firewall framework that offers to firewall consumers different
> firewall services such as the ability to check their access rights against
> their firewall controller(s).
> 
> The firewall framework offers a generic API that is defined in firewall
> controllers drivers to best fit the specificity of each firewall.

But you aren't defining a "generic" api here, you are defining a
specific one for your specific hardware.

Or am I missing something?

> 
> There are various types of firewalls:
> -Peripheral firewalls that filter accesses to peripherals
> -Memory firewalls that filter accesses to memories or memory regions
> -Resource firewalls that filter accesses to internal resources such as
> reset and clock controllers
> 
> A firewall controller must be probed at arch_initcall level and register
> to the framework so that consumers can use their services.

Why must it happen at arch_initcall?  So it can never be a module?  That
feels wrong.

> 
> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
> ---
>  MAINTAINERS                               |   5 +
>  arch/arm64/Kconfig.platforms              |   1 +
>  drivers/bus/Kconfig                       |  10 +
>  drivers/bus/Makefile                      |   1 +
>  drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
>  drivers/bus/stm32_firewall.h              |  83 +++++++
>  include/linux/bus/stm32_firewall_device.h | 134 ++++++++++++
>  7 files changed, 486 insertions(+)
>  create mode 100644 drivers/bus/stm32_firewall.c
>  create mode 100644 drivers/bus/stm32_firewall.h
>  create mode 100644 include/linux/bus/stm32_firewall_device.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 41385f01fa98..fabf95ba9b86 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20123,6 +20123,11 @@ T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
>  F:	drivers/media/i2c/st-mipid02.c
>  
> +ST STM32 FIREWALL
> +M:	Gatien Chevallier <gatien.chevallier@foss.st.com>
> +S:	Maintained
> +F:	drivers/bus/stm32_firewall.c
> +
>  ST STM32 I2C/SMBUS DRIVER
>  M:	Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
>  M:	Alain Volmat <alain.volmat@foss.st.com>
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index 6069120199bb..5a46e90f1e4e 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -293,6 +293,7 @@ config ARCH_STM32
>  	select ARM_SMC_MBOX
>  	select ARM_SCMI_PROTOCOL
>  	select COMMON_CLK_SCMI
> +	select STM32_FIREWALL
>  	help
>  	  This enables support for ARMv8 based STMicroelectronics
>  	  STM32 family, including:
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> index fcfa280df98a..4d54a7ea52b2 100644
> --- a/drivers/bus/Kconfig
> +++ b/drivers/bus/Kconfig
> @@ -163,6 +163,16 @@ config QCOM_SSC_BLOCK_BUS
>  	  i2c/spi/uart controllers, a hexagon core, and a clock controller
>  	  which provides clocks for the above.
>  
> +config STM32_FIREWALL
> +	bool "STM32 Firewall framework"
> +	depends on ARCH_STM32

Why this dependency?

> +	default MACH_STM32MP157 || MACH_STM32MP13 || MACH_STM32MP25
> +	help
> +	  Say y to enable firewall framework and its services. Firewall
> +	  controllers will be able to register to the framework. Firewall
> +	  controllers must be initialized and register to the firewall framework
> +	  at arch_initcall level.

This needs better wording saying it is only for stm32 devices.

> +
>  config SUN50I_DE2_BUS
>  	bool "Allwinner A64 DE2 Bus Driver"
>  	  default ARM64
> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
> index d90eed189a65..fc0511450ec2 100644
> --- a/drivers/bus/Makefile
> +++ b/drivers/bus/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
>  obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
>  obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
>  obj-$(CONFIG_QCOM_SSC_BLOCK_BUS)	+= qcom-ssc-block-bus.o
> +obj-$(CONFIG_STM32_FIREWALL)	+= stm32_firewall.o
>  obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
>  obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
>  obj-$(CONFIG_OF)		+= simple-pm-bus.o
> diff --git a/drivers/bus/stm32_firewall.c b/drivers/bus/stm32_firewall.c
> new file mode 100644
> index 000000000000..510db5bc6eaf
> --- /dev/null
> +++ b/drivers/bus/stm32_firewall.c
> @@ -0,0 +1,252 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later

Are you _SURE_ this needs to be "or later"?  Sorry, I have to ask.

thanks,

greg k-h
Gatien CHEVALLIER July 7, 2023, 1:43 p.m. UTC | #3
On 7/6/23 17:09, Rob Herring wrote:
> On Wed, Jul 05, 2023 at 07:27:54PM +0200, Gatien Chevallier wrote:
>> Introduce a firewall framework that offers to firewall consumers different
>> firewall services such as the ability to check their access rights against
>> their firewall controller(s).
>>
>> The firewall framework offers a generic API that is defined in firewall
>> controllers drivers to best fit the specificity of each firewall.
>>
>> There are various types of firewalls:
>> -Peripheral firewalls that filter accesses to peripherals
>> -Memory firewalls that filter accesses to memories or memory regions
>> -Resource firewalls that filter accesses to internal resources such as
>> reset and clock controllers
> 
> How do resource firewalls work? Access to registers for some clocks in a
> clock controller are disabled? Or something gates off clocks/resets to
> a block?

To take a practical example:

A clock controller can be firewall-aware and have its own firewall 
registers to configure. To access a clock/reset that is handled this 
way, a device would need to check this "resource firewall". I thought 
that for these kinds of hardware blocks, having a common API would help.

> 
> It might make more sense for "resource" accesses to be managed within
> those resource APIs (i.e. the clock and reset frameworks) and leave this
> framework to bus accesses.
> 

Okay, I'll drop this for V2 if you find that the above explaination do 
not justify this.

>> A firewall controller must be probed at arch_initcall level and register
>> to the framework so that consumers can use their services.
> 
> initcall ordering hacks should not be needed. We have both deferred
> probe and fw_devlinks to avoid that problem.
> 

Greg also doubts this.

Drivers like reset/clock controllers drivers (core_initcall level) will 
have a dependency on the firewall controllers in order to initialize 
their resources. I was not sure how to manage these dependencies.

Now, looking at init/main.c, I've realized that core_initcall() level 
comes before arch_initcall() level...

If managed by fw_devlink, the feature-domains property should be 
supported as well I suppose? I'm not sure how to handle this properly. 
I'd welcome your suggestion.

>>
>> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
>> ---
>>   MAINTAINERS                               |   5 +
>>   arch/arm64/Kconfig.platforms              |   1 +
>>   drivers/bus/Kconfig                       |  10 +
>>   drivers/bus/Makefile                      |   1 +
>>   drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
>>   drivers/bus/stm32_firewall.h              |  83 +++++++
> 
> Why something stm32 specific? We know there are multiple platforms
> wanting something in this area. Wasn't the last attempt common?
> 
> For a common binding, I'm not eager to accept anything new with only 1
> user.
> 

Last attempt was common for the feature-domain bindings. The system-bus 
driver was ST-specific. I don't know if other platforms needs this kind
of framework. Are you suggesting that this framework should be generic? 
Or that this framework should have a st-specific property?

I've oriented this firewall framework to serve ST purpose. There may be 
a need for other platforms but I'm not sure that this framework serves 
them well. One can argue that it is quite minimalist and covers basic 
purposes of a hardware firewall but I would need more feedback from 
other vendors to submit it as a generic one.

>>   include/linux/bus/stm32_firewall_device.h | 134 ++++++++++++
>>   7 files changed, 486 insertions(+)
>>   create mode 100644 drivers/bus/stm32_firewall.c
>>   create mode 100644 drivers/bus/stm32_firewall.h
>>   create mode 100644 include/linux/bus/stm32_firewall_device.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 41385f01fa98..fabf95ba9b86 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -20123,6 +20123,11 @@ T:	git git://linuxtv.org/media_tree.git
>>   F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
>>   F:	drivers/media/i2c/st-mipid02.c
>>   
>> +ST STM32 FIREWALL
>> +M:	Gatien Chevallier <gatien.chevallier@foss.st.com>
>> +S:	Maintained
>> +F:	drivers/bus/stm32_firewall.c
>> +
>>   ST STM32 I2C/SMBUS DRIVER
>>   M:	Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
>>   M:	Alain Volmat <alain.volmat@foss.st.com>
>> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
>> index 6069120199bb..5a46e90f1e4e 100644
>> --- a/arch/arm64/Kconfig.platforms
>> +++ b/arch/arm64/Kconfig.platforms
>> @@ -293,6 +293,7 @@ config ARCH_STM32
>>   	select ARM_SMC_MBOX
>>   	select ARM_SCMI_PROTOCOL
>>   	select COMMON_CLK_SCMI
>> +	select STM32_FIREWALL
>>   	help
>>   	  This enables support for ARMv8 based STMicroelectronics
>>   	  STM32 family, including:
>> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
>> index fcfa280df98a..4d54a7ea52b2 100644
>> --- a/drivers/bus/Kconfig
>> +++ b/drivers/bus/Kconfig
>> @@ -163,6 +163,16 @@ config QCOM_SSC_BLOCK_BUS
>>   	  i2c/spi/uart controllers, a hexagon core, and a clock controller
>>   	  which provides clocks for the above.
>>   
>> +config STM32_FIREWALL
>> +	bool "STM32 Firewall framework"
>> +	depends on ARCH_STM32
>> +	default MACH_STM32MP157 || MACH_STM32MP13 || MACH_STM32MP25
>> +	help
>> +	  Say y to enable firewall framework and its services. Firewall
>> +	  controllers will be able to register to the framework. Firewall
>> +	  controllers must be initialized and register to the firewall framework
>> +	  at arch_initcall level.
>> +
>>   config SUN50I_DE2_BUS
>>   	bool "Allwinner A64 DE2 Bus Driver"
>>   	  default ARM64
>> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
>> index d90eed189a65..fc0511450ec2 100644
>> --- a/drivers/bus/Makefile
>> +++ b/drivers/bus/Makefile
>> @@ -26,6 +26,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
>>   obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
>>   obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
>>   obj-$(CONFIG_QCOM_SSC_BLOCK_BUS)	+= qcom-ssc-block-bus.o
>> +obj-$(CONFIG_STM32_FIREWALL)	+= stm32_firewall.o
>>   obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
>>   obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
>>   obj-$(CONFIG_OF)		+= simple-pm-bus.o
>> diff --git a/drivers/bus/stm32_firewall.c b/drivers/bus/stm32_firewall.c
>> new file mode 100644
>> index 000000000000..510db5bc6eaf
>> --- /dev/null
>> +++ b/drivers/bus/stm32_firewall.c
>> @@ -0,0 +1,252 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
> 
> The default kernel license is GPL-2.0-only. Why the deviation?
> 
>> +/*
>> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
>> + */
>> +
>> +#include <linux/bitfield.h>
>> +#include <linux/bits.h>
>> +#include <linux/bus/stm32_firewall_device.h>
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/types.h>
>> +
>> +#include "stm32_firewall.h"
>> +
>> +/* Corresponds to STM32_FIREWALL_MAX_EXTRA_ARGS + firewall controller reference + firewall ID */
>> +#define STM32_FIREWALL_MAX_ARGS		(STM32_FIREWALL_MAX_EXTRA_ARGS + 2)
>> +
>> +static LIST_HEAD(firewall_controller_list);
>> +static DEFINE_MUTEX(firewall_controller_list_lock);
>> +
>> +static int stm32_firewall_get_id(struct device_node *np, u32 *id)
>> +{
>> +	u32 feature_domain_cell[2];
>> +
>> +	/* Get property from device node */
>> +	if (of_property_read_u32_array(np, "feature-domains",
>> +				       feature_domain_cell,
>> +				       ARRAY_SIZE(feature_domain_cell))) {
>> +		pr_err("Unable to find get firewall ID property\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	*id = feature_domain_cell[1];
>> +
>> +	return 0;
>> +}
>> +
>> +/* Firewall device API */
>> +
>> +int stm32_firewall_get_firewall(struct device_node *np,
>> +				struct stm32_firewall *firewall)
>> +{
>> +	struct stm32_firewall_controller *ctrl;
>> +	struct of_phandle_args args;
>> +	u32 controller_phandle;
>> +	bool match = false;
>> +	size_t i;
>> +	int err;
>> +
>> +	if (!firewall)
>> +		return -EINVAL;
>> +
>> +	/* The controller phandle is always the first argument of the feature-domains property. */
>> +	err = of_property_read_u32(np, "feature-domains", &controller_phandle);
> 
> Why do you need to parse the property twice?
> 

The first parsing is to have the first argument, which is the controller 
phandle. The second parsing is here to get the firewall arguments based 
on the number of arguments defined by #feature-domain-cells. Maybe using 
of_property_read_u32_array() would be better. I did not want to close 
the door for supporting several feature domain controllers, hence 
multiple phandles. of_parse_phandle_with_args() seemed fine for this 
purpose but the phandle is parsed out.

Best regards,
Gatien

>> +	if (err) {
>> +		pr_err("Unable to get feature-domains property for node %s\n", np->full_name);
>> +		return err;
>> +	}
>> +
>> +	/* Parse property with phandle parsed out */
>> +	err = of_parse_phandle_with_args(np, "feature-domains", "#feature-domain-cells", 0, &args);
>> +	if (err) {
>> +		pr_err("Unable to read feature-domains arguments for node %s\n", np->full_name);
>> +		return err;
>> +	}
>> +
>> +	/* The phandle is parsed out */
>> +	if (args.args_count > STM32_FIREWALL_MAX_ARGS - 1)
>> +		return -EINVAL;
>> +
>> +	of_node_put(np);
>> +
>> +	/* Check if the parsed phandle corresponds to a registered firewall controller */
>> +	mutex_lock(&firewall_controller_list_lock);
>> +	list_for_each_entry(ctrl, &firewall_controller_list, entry) {
>> +		if (ctrl->dev->of_node->phandle == controller_phandle) {
>> +			match = true;
>> +			firewall->firewall_ctrl = ctrl;
>> +			break;
>> +		}
>> +	}
>> +	mutex_unlock(&firewall_controller_list_lock);
>> +	if (!match) {
>> +		firewall->firewall_ctrl = NULL;
>> +		pr_err("No firewall controller registered for %s\n", np->full_name);
>> +		return -ENODEV;
>> +	}
>> +
>> +	/*
>> +	 * The firewall ID is always the second argument of the feature-domains property.
>> +	 * The first argument is already parsed out, so args.args[0] is the second argument.
>> +	 */
>> +	firewall->firewall_id = args.args[0];
>> +
>> +	/* Extra args start at the third argument */
>> +	for (i = 0; i < args.args_count; i++)
>> +		firewall->extra_args[i] = args.args[i + 1];
>> +
>> +	/* Remove the firewall ID arg that is not an extra argument */
>> +	if (args.args_count >= 1)
>> +		firewall->extra_args_size = args.args_count - 1;
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(stm32_firewall_get_firewall);
>> +
>> +int stm32_firewall_grant_access(struct stm32_firewall *firewall)
>> +{
>> +	struct stm32_firewall_controller *firewall_controller;
>> +
>> +	if (!firewall || firewall->firewall_id == U32_MAX)
>> +		return -EINVAL;
>> +
>> +	firewall_controller = firewall->firewall_ctrl;
>> +
>> +	if (!firewall_controller)
>> +		return -ENODEV;
>> +
>> +	return firewall_controller->grant_access(firewall_controller, firewall->firewall_id);
>> +}
>> +EXPORT_SYMBOL_GPL(stm32_firewall_grant_access);
>> +
>> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>> +{
>> +	struct stm32_firewall_controller *firewall_controller;
>> +
>> +	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX)
>> +		return -EINVAL;
>> +
>> +	firewall_controller = firewall->firewall_ctrl;
>> +
>> +	if (!firewall_controller)
>> +		return -ENODEV;
>> +
>> +	return firewall_controller->grant_access(firewall_controller, subsystem_id);
>> +}
>> +EXPORT_SYMBOL_GPL(stm32_firewall_grant_access_by_id);
>> +
>> +void stm32_firewall_release_access(struct stm32_firewall *firewall)
>> +{
>> +	struct stm32_firewall_controller *firewall_controller;
>> +
>> +	if (!firewall || firewall->firewall_id == U32_MAX) {
>> +		pr_err("Incorrect arguments when releasing a firewall access");
>> +		return;
>> +	}
>> +
>> +	firewall_controller = firewall->firewall_ctrl;
>> +
>> +	if (!firewall_controller) {
>> +		pr_debug("No firewall controller to release");
>> +		return;
>> +	}
>> +
>> +	firewall_controller->release_access(firewall_controller, firewall->firewall_id);
>> +}
>> +EXPORT_SYMBOL_GPL(stm32_firewall_release_access);
>> +
>> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>> +{
>> +	struct stm32_firewall_controller *firewall_controller;
>> +
>> +	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX) {
>> +		pr_err("Incorrect arguments when releasing a firewall access");
>> +		return;
>> +	}
>> +
>> +	firewall_controller = firewall->firewall_ctrl;
>> +
>> +	if (!firewall_controller) {
>> +		pr_debug("No firewall controller to release");
>> +		return;
>> +	}
>> +
>> +	firewall_controller->release_access(firewall_controller, subsystem_id);
>> +}
>> +EXPORT_SYMBOL_GPL(stm32_firewall_release_access_by_id);
>> +
>> +/* Firewall controller API */
>> +
>> +int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller)
>> +{
>> +	pr_info("Registering firewall controller %s", dev_name(firewall_controller->dev));
>> +
>> +	if (!firewall_controller)
>> +		return -ENODEV;
>> +
>> +	mutex_lock(&firewall_controller_list_lock);
>> +	list_add_tail(&firewall_controller->entry, &firewall_controller_list);
>> +	mutex_unlock(&firewall_controller_list_lock);
>> +
>> +	return 0;
>> +
>> +}
>> +
>> +void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller)
>> +{
>> +	struct stm32_firewall_controller *ctrl, *tmp;
>> +	bool controller_removed = false;
>> +
>> +	if (!firewall_controller) {
>> +		pr_debug("Null reference while unregistering firewall controller");
>> +		return;
>> +	}
>> +
>> +	mutex_lock(&firewall_controller_list_lock);
>> +	list_for_each_entry_safe(ctrl, tmp, &firewall_controller_list, entry) {
>> +		if (ctrl == firewall_controller) {
>> +			controller_removed = true;
>> +			list_del_init(&ctrl->entry);
>> +			break;
>> +		}
>> +	}
>> +	mutex_unlock(&firewall_controller_list_lock);
>> +
>> +	if (!controller_removed)
>> +		pr_debug("There was no firewall controller named %s to unregister",
>> +			 dev_name(firewall_controller->dev));
>> +}
>> +
>> +void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller)
>> +{
>> +	struct device_node *child;
>> +	struct device *parent;
>> +	u32 firewall_id;
>> +	int err;
>> +
>> +	parent = firewall_controller->dev;
>> +
>> +	dev_dbg(parent, "Populating %s system bus\n", dev_name(firewall_controller->dev));
>> +
>> +	for_each_available_child_of_node(dev_of_node(parent), child) {
>> +		err = stm32_firewall_get_id(child, &firewall_id);
>> +		if (err < 0 ||
>> +		    firewall_controller->grant_access(firewall_controller, firewall_id)) {
>> +			/*
>> +			 * Peripheral access not allowed or not defined.
>> +			 * Mark the node as populated so platform bus won't probe it
>> +			 */
>> +			of_node_set_flag(child, OF_POPULATED);
>> +			dev_err(parent, "%s: Device driver will not be probed\n",
>> +				child->full_name);
>> +		}
>> +	}
>> +}
>> diff --git a/drivers/bus/stm32_firewall.h b/drivers/bus/stm32_firewall.h
>> new file mode 100644
>> index 000000000000..8d92e8c1ab77
>> --- /dev/null
>> +++ b/drivers/bus/stm32_firewall.h
>> @@ -0,0 +1,83 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/*
>> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
>> + */
>> +
>> +#ifndef _STM32_FIREWALL_H
>> +#define _STM32_FIREWALL_H
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/list.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/types.h>
>> +
>> +/**
>> + * STM32_PERIPHERAL_FIREWALL:		This type of firewall protects peripherals
>> + * STM32_MEMORY_FIREWALL:		This type of firewall protects memories/subsets of memory
>> + *					zones
>> + * STM32_RESOURCE_FIREWALL:		This type of firewall protects internal resources
>> + * STM32_NOTYPE_FIREWALL:		Undefined firewall type
>> + */
>> +
>> +#define STM32_PERIPHERAL_FIREWALL	BIT(1)
>> +#define STM32_MEMORY_FIREWALL		BIT(2)
>> +#define STM32_RESOURCE_FIREWALL		BIT(3)
>> +#define STM32_NOTYPE_FIREWALL		BIT(4)
>> +
>> +/**
>> + * struct stm32_firewall_controller - Information on firewall controller supplying services
>> + *
>> + * @name			Name of the firewall controller
>> + * @dev				Device reference of the firewall controller
>> + * @mmio			Base address of the firewall controller
>> + * @entry			List entry of the firewall controller list
>> + * @type			Type of firewall
>> + * @max_entries			Number of entries covered by the firewall
>> + * @grant_access		Callback used to grant access for a device access against a
>> + *				firewall controller
>> + * @release_access		Callback used to release resources taken by a device when access was
>> + *				granted
>> + * @grant_memory_range_access	Callback used to grant access for a device to a given memory region
>> + */
>> +struct stm32_firewall_controller {
>> +	const char *name;
>> +	struct device *dev;
>> +	void __iomem *mmio;
>> +	struct list_head entry;
>> +	unsigned int type;
>> +	unsigned int max_entries;
>> +
>> +	int (*grant_access)(struct stm32_firewall_controller *ctrl, u32 id);
>> +	void (*release_access)(struct stm32_firewall_controller *ctrl, u32 id);
>> +	int (*grant_memory_range_access)(struct stm32_firewall_controller *ctrl, phys_addr_t paddr,
>> +					 size_t size);
>> +};
>> +
>> +/**
>> + * int stm32_firewall_controller_register - Register a firewall controller to the STM32 firewall
>> + *					    framework
>> + * @firewall_controller		Firewall controller to register
>> + *
>> + * Returns 0 in case of success or -ENODEV if no controller was given.
>> + */
>> +int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller);
>> +
>> +/**
>> + * int stm32_firewall_controller_unregister - Unregister a firewall controller from the STM32
>> + *					      firewall framework
>> + * @firewall_controller		Firewall controller to unregister
>> + */
>> +void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller);
>> +
>> +/**
>> + * stm32_firewall_populate_bus - Populate device tree nodes that have a correct firewall
>> + *				 configuration. This is used at boot-time only, as a sanity check
>> + *				 between device tree and firewalls hardware configurations to
>> + *				 prevent a kernel crash when a device driver is not granted access
>> + *
>> + * @firewall_controller		Firewall controller which nodes will be populated or not
>> + */
>> +void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller);
>> +
>> +#endif /* _STM32_FIREWALL_H */
>> diff --git a/include/linux/bus/stm32_firewall_device.h b/include/linux/bus/stm32_firewall_device.h
>> new file mode 100644
>> index 000000000000..ccaecea7fc6c
>> --- /dev/null
>> +++ b/include/linux/bus/stm32_firewall_device.h
>> @@ -0,0 +1,134 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/*
>> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
>> + */
>> +
>> +#ifndef STM32_FIREWALL_DEVICE_H
>> +#define STM32_FIREWALL_DEVICE_H
>> +
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/types.h>
>> +
>> +#define STM32_FIREWALL_MAX_EXTRA_ARGS		5
>> +
>> +/* Opaque reference to stm32_firewall_controller */
>> +struct stm32_firewall_controller;
>> +
>> +/**
>> + * stm32_firewall - Information on a device's firewall. Each device can have more than one firewall.
>> + *
>> + * @firewall_ctrl		Pointer referencing a firewall controller of the device. It is
>> + *				opaque so a device cannot manipulate the controller's ops or access
>> + *				the controller's data
>> + * @extra_args			Extra arguments that are implementation dependent
>> + * @extra_args_size		Number of extra arguments
>> + * @firewall_id			Firewall ID associated the device for this firewall controller
>> + */
>> +struct stm32_firewall {
>> +	struct stm32_firewall_controller *firewall_ctrl;
>> +	u32 extra_args[STM32_FIREWALL_MAX_EXTRA_ARGS];
>> +	size_t extra_args_size;
>> +	u32 firewall_id;
>> +};
>> +
>> +#if IS_ENABLED(CONFIG_STM32_FIREWALL)
>> +/**
>> + * stm32_firewall_get_firewall - Get the firewall(s) associated to given device.
>> + *				 The firewall controller reference is always the first argument
>> + *				 of the feature-domains property.
>> + *				 The firewall ID is always the second argument of the
>> + *				 feature-domains property.
>> + *
>> + * @np				Device node to parse
>> + * @firewall			Resulting firewall reference(s)
>> + *
>> + * Returns 0 on success, -ENODEV if there's no match with a firewall controller or appropriate errno
>> + * code if error occurred.
>> + */
>> +int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall);
>> +
>> +/**
>> + * stm32_firewall_grant_access - Request firewall access rights and grant access.
>> + *
>> + * @firewall			Firewall reference containing the ID to check against its firewall
>> + *				controller
>> + *
>> + * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
>> + * appropriate errno code if error occurred
>> + */
>> +int stm32_firewall_grant_access(struct stm32_firewall *firewall);
>> +
>> +/**
>> + * stm32_firewall_release_access - Release access granted from a call to
>> + *				   stm32_firewall_grant_access().
>> + *
>> + * @firewall			Firewall reference containing the ID to check against its firewall
>> + *				controller
>> + */
>> +void stm32_firewall_release_access(struct stm32_firewall *firewall);
>> +
>> +/**
>> + * stm32_firewall_grant_access_by_id - Request firewall access rights of a given device
>> + *				       based on a specific firewall ID
>> + *
>> + * Warnings:
>> + * There is no way to ensure that the given ID will correspond to the firewall referenced in the
>> + * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
>> + * function must be used with caution.
>> + * This function should be used for subsystem resources that do not have the same firewall ID
>> + * as their parent.
>> + * U32_MAX is an invalid ID.
>> + *
>> + * @firewall			Firewall reference containing the firewall controller
>> + * @subsystem_id		Firewall ID of the subsystem resource
>> + *
>> + * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
>> + * appropriate errno code if error occurred
>> + */
>> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);
>> +
>> +/**
>> + * stm32_firewall_release_access_by_id - Release access granted from a call to
>> + *					 stm32_firewall_grant_access_by_id().
>> + *
>> + * Warnings:
>> + * There is no way to ensure that the given ID will correspond to the firewall referenced in the
>> + * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
>> + * function must be used with caution.
>> + * This function should be used for subsystem resources that do not have the same firewall ID
>> + * as their parent.
>> + * U32_MAX is an invalid ID.
>> + *
>> + * @firewall			Firewall reference containing the firewall controller
>> + * @subsystem_id		Firewall ID of the subsystem resource
>> + */
>> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);
>> +
>> +#else /* CONFIG_STM32_FIREWALL */
>> +
>> +int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall)
>> +{
>> +	return -ENODEV;
>> +}
>> +
>> +int stm32_firewall_grant_access(struct stm32_firewall *firewall)
>> +{
>> +	return -ENODEV;
>> +}
>> +
>> +void stm32_firewall_release_access(struct stm32_firewall *firewall)
>> +{
>> +}
>> +
>> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>> +{
>> +	return -ENODEV;
>> +}
>> +
>> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>> +{
>> +}
>> +
>> +#endif /* CONFIG_STM32_FIREWALL */
>> +#endif /* STM32_FIREWALL_DEVICE_H */
>> -- 
>> 2.25.1
>>
Oleksii Moisieiev July 7, 2023, 1:50 p.m. UTC | #4
Gatien Chevallier <gatien.chevallier@foss.st.com> writes:

> Introduce a firewall framework that offers to firewall consumers different
> firewall services such as the ability to check their access rights against
> their firewall controller(s).
>
> The firewall framework offers a generic API that is defined in firewall
> controllers drivers to best fit the specificity of each firewall.
>
> There are various types of firewalls:
> -Peripheral firewalls that filter accesses to peripherals
> -Memory firewalls that filter accesses to memories or memory regions
> -Resource firewalls that filter accesses to internal resources such as
> reset and clock controllers
>
> A firewall controller must be probed at arch_initcall level and register
> to the framework so that consumers can use their services.
>
> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
> ---
>  MAINTAINERS                               |   5 +
>  arch/arm64/Kconfig.platforms              |   1 +
>  drivers/bus/Kconfig                       |  10 +
>  drivers/bus/Makefile                      |   1 +
>  drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
>  drivers/bus/stm32_firewall.h              |  83 +++++++
>  include/linux/bus/stm32_firewall_device.h | 134 ++++++++++++
>  7 files changed, 486 insertions(+)
>  create mode 100644 drivers/bus/stm32_firewall.c
>  create mode 100644 drivers/bus/stm32_firewall.h
>  create mode 100644 include/linux/bus/stm32_firewall_device.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 41385f01fa98..fabf95ba9b86 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20123,6 +20123,11 @@ T:	git git://linuxtv.org/media_tree.git
>  F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
>  F:	drivers/media/i2c/st-mipid02.c
>  
> +ST STM32 FIREWALL
> +M:	Gatien Chevallier <gatien.chevallier@foss.st.com>
> +S:	Maintained
> +F:	drivers/bus/stm32_firewall.c
> +
>  ST STM32 I2C/SMBUS DRIVER
>  M:	Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
>  M:	Alain Volmat <alain.volmat@foss.st.com>
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index 6069120199bb..5a46e90f1e4e 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -293,6 +293,7 @@ config ARCH_STM32
>  	select ARM_SMC_MBOX
>  	select ARM_SCMI_PROTOCOL
>  	select COMMON_CLK_SCMI
> +	select STM32_FIREWALL
>  	help
>  	  This enables support for ARMv8 based STMicroelectronics
>  	  STM32 family, including:
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> index fcfa280df98a..4d54a7ea52b2 100644
> --- a/drivers/bus/Kconfig
> +++ b/drivers/bus/Kconfig
> @@ -163,6 +163,16 @@ config QCOM_SSC_BLOCK_BUS
>  	  i2c/spi/uart controllers, a hexagon core, and a clock controller
>  	  which provides clocks for the above.
>  
> +config STM32_FIREWALL
> +	bool "STM32 Firewall framework"
> +	depends on ARCH_STM32
> +	default MACH_STM32MP157 || MACH_STM32MP13 || MACH_STM32MP25
> +	help
> +	  Say y to enable firewall framework and its services. Firewall
> +	  controllers will be able to register to the framework. Firewall
> +	  controllers must be initialized and register to the firewall framework
> +	  at arch_initcall level.
> +
>  config SUN50I_DE2_BUS
>  	bool "Allwinner A64 DE2 Bus Driver"
>  	  default ARM64
> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
> index d90eed189a65..fc0511450ec2 100644
> --- a/drivers/bus/Makefile
> +++ b/drivers/bus/Makefile
> @@ -26,6 +26,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
>  obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
>  obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
>  obj-$(CONFIG_QCOM_SSC_BLOCK_BUS)	+= qcom-ssc-block-bus.o
> +obj-$(CONFIG_STM32_FIREWALL)	+= stm32_firewall.o
>  obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
>  obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
>  obj-$(CONFIG_OF)		+= simple-pm-bus.o
> diff --git a/drivers/bus/stm32_firewall.c b/drivers/bus/stm32_firewall.c
> new file mode 100644
> index 000000000000..510db5bc6eaf
> --- /dev/null
> +++ b/drivers/bus/stm32_firewall.c
> @@ -0,0 +1,252 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/bus/stm32_firewall_device.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +
> +#include "stm32_firewall.h"
> +
> +/* Corresponds to STM32_FIREWALL_MAX_EXTRA_ARGS + firewall controller reference + firewall ID */
> +#define STM32_FIREWALL_MAX_ARGS		(STM32_FIREWALL_MAX_EXTRA_ARGS + 2)
> +
> +static LIST_HEAD(firewall_controller_list);
> +static DEFINE_MUTEX(firewall_controller_list_lock);
> +
> +static int stm32_firewall_get_id(struct device_node *np, u32 *id)
> +{
> +	u32 feature_domain_cell[2];
> +
> +	/* Get property from device node */
> +	if (of_property_read_u32_array(np, "feature-domains",
> +				       feature_domain_cell,
> +				       ARRAY_SIZE(feature_domain_cell))) {
> +		pr_err("Unable to find get firewall ID property\n");
> +		return -ENODEV;
> +	}
> +
> +	*id = feature_domain_cell[1];
> +
> +	return 0;
> +}
> +
> +/* Firewall device API */
> +
> +int stm32_firewall_get_firewall(struct device_node *np,
> +				struct stm32_firewall *firewall)
> +{
> +	struct stm32_firewall_controller *ctrl;
> +	struct of_phandle_args args;
> +	u32 controller_phandle;
> +	bool match = false;
> +	size_t i;
> +	int err;
> +
> +	if (!firewall)
> +		return -EINVAL;
> +
> +	/* The controller phandle is always the first argument of the feature-domains property. */
> +	err = of_property_read_u32(np, "feature-domains", &controller_phandle);
> +	if (err) {
> +		pr_err("Unable to get feature-domains property for node %s\n", np->full_name);
> +		return err;
> +	}
> +
> +	/* Parse property with phandle parsed out */
> +	err = of_parse_phandle_with_args(np, "feature-domains", "#feature-domain-cells", 0, &args);
> +	if (err) {
> +		pr_err("Unable to read feature-domains arguments for node %s\n", np->full_name);
> +		return err;
> +	}
> +
> +	/* The phandle is parsed out */
> +	if (args.args_count > STM32_FIREWALL_MAX_ARGS - 1)
> +		return -EINVAL;
> +
> +	of_node_put(np);
> +
> +	/* Check if the parsed phandle corresponds to a registered firewall controller */
> +	mutex_lock(&firewall_controller_list_lock);
> +	list_for_each_entry(ctrl, &firewall_controller_list, entry) {
> +		if (ctrl->dev->of_node->phandle == controller_phandle) {
> +			match = true;
> +			firewall->firewall_ctrl = ctrl;
> +			break;
> +		}
> +	}
> +	mutex_unlock(&firewall_controller_list_lock);
> +	if (!match) {
> +		firewall->firewall_ctrl = NULL;
> +		pr_err("No firewall controller registered for %s\n", np->full_name);
> +		return -ENODEV;
> +	}
> +
> +	/*
> +	 * The firewall ID is always the second argument of the feature-domains property.
> +	 * The first argument is already parsed out, so args.args[0] is the second argument.
> +	 */
> +	firewall->firewall_id = args.args[0];
> +
> +	/* Extra args start at the third argument */
> +	for (i = 0; i < args.args_count; i++)
> +		firewall->extra_args[i] = args.args[i + 1];
> +
> +	/* Remove the firewall ID arg that is not an extra argument */
> +	if (args.args_count >= 1)
> +		firewall->extra_args_size = args.args_count - 1;

As I can see you support some extra args, that can be provided in the
feature-domain property. But in the binding description I see maxItems:
2. I beliewe this should be highlighted in bindings description.

> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(stm32_firewall_get_firewall);
> +
> +int stm32_firewall_grant_access(struct stm32_firewall *firewall)
> +{
> +	struct stm32_firewall_controller *firewall_controller;
> +
> +	if (!firewall || firewall->firewall_id == U32_MAX)
> +		return -EINVAL;
> +
> +	firewall_controller = firewall->firewall_ctrl;
> +
> +	if (!firewall_controller)
> +		return -ENODEV;
> +
> +	return firewall_controller->grant_access(firewall_controller, firewall->firewall_id);
> +}
> +EXPORT_SYMBOL_GPL(stm32_firewall_grant_access);
> +
> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
> +{
> +	struct stm32_firewall_controller *firewall_controller;
> +
> +	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX)
> +		return -EINVAL;
> +
> +	firewall_controller = firewall->firewall_ctrl;
> +
> +	if (!firewall_controller)
> +		return -ENODEV;
> +
> +	return firewall_controller->grant_access(firewall_controller, subsystem_id);
> +}
> +EXPORT_SYMBOL_GPL(stm32_firewall_grant_access_by_id);
> +
> +void stm32_firewall_release_access(struct stm32_firewall *firewall)
> +{
> +	struct stm32_firewall_controller *firewall_controller;
> +
> +	if (!firewall || firewall->firewall_id == U32_MAX) {
> +		pr_err("Incorrect arguments when releasing a firewall access");
> +		return;
> +	}
> +
> +	firewall_controller = firewall->firewall_ctrl;
> +
> +	if (!firewall_controller) {
> +		pr_debug("No firewall controller to release");
> +		return;
> +	}
> +
> +	firewall_controller->release_access(firewall_controller, firewall->firewall_id);
> +}
> +EXPORT_SYMBOL_GPL(stm32_firewall_release_access);
> +
> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
> +{
> +	struct stm32_firewall_controller *firewall_controller;
> +
> +	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX) {
> +		pr_err("Incorrect arguments when releasing a firewall access");
> +		return;
> +	}
> +
> +	firewall_controller = firewall->firewall_ctrl;
> +
> +	if (!firewall_controller) {
> +		pr_debug("No firewall controller to release");
> +		return;
> +	}
> +
> +	firewall_controller->release_access(firewall_controller, subsystem_id);
> +}
> +EXPORT_SYMBOL_GPL(stm32_firewall_release_access_by_id);
> +
> +/* Firewall controller API */
> +
> +int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller)
> +{
> +	pr_info("Registering firewall controller %s", dev_name(firewall_controller->dev));
> +
> +	if (!firewall_controller)
> +		return -ENODEV;
> +
> +	mutex_lock(&firewall_controller_list_lock);
> +	list_add_tail(&firewall_controller->entry, &firewall_controller_list);
> +	mutex_unlock(&firewall_controller_list_lock);
> +
> +	return 0;
> +
> +}
> +
> +void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller)
> +{
> +	struct stm32_firewall_controller *ctrl, *tmp;
> +	bool controller_removed = false;
> +
> +	if (!firewall_controller) {
> +		pr_debug("Null reference while unregistering firewall controller");
> +		return;
> +	}
> +
> +	mutex_lock(&firewall_controller_list_lock);
> +	list_for_each_entry_safe(ctrl, tmp, &firewall_controller_list, entry) {
> +		if (ctrl == firewall_controller) {
> +			controller_removed = true;
> +			list_del_init(&ctrl->entry);
> +			break;
> +		}
> +	}
IIUC list_for_each_entry_safe protects you from removing node during
loop. But all list operations are done under
firewall_controller_list_lock mutex. I beliewe there is no need for
_safe call under the mutex because removing node during loop is
impossible. I think it worth investigation if it's safe to use
list_for_each_entry_safe without lock.
> +	mutex_unlock(&firewall_controller_list_lock);
> +
> +	if (!controller_removed)
> +		pr_debug("There was no firewall controller named %s to unregister",
> +			 dev_name(firewall_controller->dev));
> +}
> +
> +void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller)
> +{
> +	struct device_node *child;
> +	struct device *parent;
> +	u32 firewall_id;
> +	int err;
> +
> +	parent = firewall_controller->dev;
> +
> +	dev_dbg(parent, "Populating %s system bus\n", dev_name(firewall_controller->dev));
> +
> +	for_each_available_child_of_node(dev_of_node(parent), child) {
> +		err = stm32_firewall_get_id(child, &firewall_id);
> +		if (err < 0 ||
> +		    firewall_controller->grant_access(firewall_controller, firewall_id)) {
> +			/*
> +			 * Peripheral access not allowed or not defined.
> +			 * Mark the node as populated so platform bus won't probe it
> +			 */
> +			of_node_set_flag(child, OF_POPULATED);
> +			dev_err(parent, "%s: Device driver will not be probed\n",
> +				child->full_name);
> +		}
> +	}
> +}
> diff --git a/drivers/bus/stm32_firewall.h b/drivers/bus/stm32_firewall.h
> new file mode 100644
> index 000000000000..8d92e8c1ab77
> --- /dev/null
> +++ b/drivers/bus/stm32_firewall.h
> @@ -0,0 +1,83 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
> + */
> +
> +#ifndef _STM32_FIREWALL_H
> +#define _STM32_FIREWALL_H
> +
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +
> +/**
> + * STM32_PERIPHERAL_FIREWALL:		This type of firewall protects peripherals

Intendation

> + * STM32_MEMORY_FIREWALL:		This type of firewall protects memories/subsets of memory
> + *					zones
> + * STM32_RESOURCE_FIREWALL:		This type of firewall protects internal resources
> + * STM32_NOTYPE_FIREWALL:		Undefined firewall type
> + */
> +
> +#define STM32_PERIPHERAL_FIREWALL	BIT(1)

Intendation

> +#define STM32_MEMORY_FIREWALL		BIT(2)
> +#define STM32_RESOURCE_FIREWALL		BIT(3)
> +#define STM32_NOTYPE_FIREWALL		BIT(4)
> +
> +/**
> + * struct stm32_firewall_controller - Information on firewall controller supplying services
> + *
> + * @name			Name of the firewall controller
> + * @dev				Device reference of the firewall controller

Intendation

> + * @mmio			Base address of the firewall controller
> + * @entry			List entry of the firewall controller list
> + * @type			Type of firewall
> + * @max_entries			Number of entries covered by the firewall
Intendation

> + * @grant_access		Callback used to grant access for a device access against a
> + *				firewall controller
> + * @release_access		Callback used to release resources taken by a device when access was
> + *				granted
> + * @grant_memory_range_access	Callback used to grant access for a device to a given memory region
> + */
> +struct stm32_firewall_controller {
> +	const char *name;
> +	struct device *dev;
> +	void __iomem *mmio;
> +	struct list_head entry;
> +	unsigned int type;
> +	unsigned int max_entries;
> +
> +	int (*grant_access)(struct stm32_firewall_controller *ctrl, u32 id);
> +	void (*release_access)(struct stm32_firewall_controller *ctrl, u32 id);
> +	int (*grant_memory_range_access)(struct stm32_firewall_controller *ctrl, phys_addr_t paddr,
> +					 size_t size);
> +};
> +
> +/**
> + * int stm32_firewall_controller_register - Register a firewall controller to the STM32 firewall
> + *					    framework
> + * @firewall_controller		Firewall controller to register
> + *
> + * Returns 0 in case of success or -ENODEV if no controller was given.
> + */
> +int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller);
> +
> +/**
> + * int stm32_firewall_controller_unregister - Unregister a firewall controller from the STM32
> + *					      firewall framework
> + * @firewall_controller		Firewall controller to unregister
> + */
> +void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller);
> +
> +/**
> + * stm32_firewall_populate_bus - Populate device tree nodes that have a correct firewall
> + *				 configuration. This is used at boot-time only, as a sanity check
> + *				 between device tree and firewalls hardware configurations to
> + *				 prevent a kernel crash when a device driver is not granted access
> + *
> + * @firewall_controller		Firewall controller which nodes will be populated or not
> + */
> +void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller);
> +
> +#endif /* _STM32_FIREWALL_H */
> diff --git a/include/linux/bus/stm32_firewall_device.h b/include/linux/bus/stm32_firewall_device.h
> new file mode 100644
> index 000000000000..ccaecea7fc6c
> --- /dev/null
> +++ b/include/linux/bus/stm32_firewall_device.h
> @@ -0,0 +1,134 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
> + */
> +
> +#ifndef STM32_FIREWALL_DEVICE_H
> +#define STM32_FIREWALL_DEVICE_H
> +
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/types.h>
> +
> +#define STM32_FIREWALL_MAX_EXTRA_ARGS		5

It's not clear to me why it's 5. Comment above sais this is
implementation defined. Maybe this parameter can be configurable?

> +
> +/* Opaque reference to stm32_firewall_controller */
> +struct stm32_firewall_controller;
> +
> +/**
> + * stm32_firewall - Information on a device's firewall. Each device can have more than one firewall.
> + *
> + * @firewall_ctrl		Pointer referencing a firewall controller of the device. It is
> + *				opaque so a device cannot manipulate the controller's ops or access
> + *				the controller's data
> + * @extra_args			Extra arguments that are implementation dependent
> + * @extra_args_size		Number of extra arguments
> + * @firewall_id			Firewall ID associated the device for this firewall controller
> + */
> +struct stm32_firewall {
> +	struct stm32_firewall_controller *firewall_ctrl;
> +	u32 extra_args[STM32_FIREWALL_MAX_EXTRA_ARGS];
> +	size_t extra_args_size;
> +	u32 firewall_id;
> +};
> +
> +#if IS_ENABLED(CONFIG_STM32_FIREWALL)
> +/**
> + * stm32_firewall_get_firewall - Get the firewall(s) associated to given device.
> + *				 The firewall controller reference is always the first argument
> + *				 of the feature-domains property.
> + *				 The firewall ID is always the second argument of the
> + *				 feature-domains property.
> + *
> + * @np				Device node to parse

Intendation

> + * @firewall			Resulting firewall reference(s)
> + *
> + * Returns 0 on success, -ENODEV if there's no match with a firewall controller or appropriate errno
> + * code if error occurred.
> + */
> +int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall);
> +
> +/**
> + * stm32_firewall_grant_access - Request firewall access rights and grant access.
> + *
> + * @firewall			Firewall reference containing the ID to check against its firewall
> + *				controller
> + *
> + * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
> + * appropriate errno code if error occurred
> + */
> +int stm32_firewall_grant_access(struct stm32_firewall *firewall);
> +
> +/**
> + * stm32_firewall_release_access - Release access granted from a call to
> + *				   stm32_firewall_grant_access().
> + *
> + * @firewall			Firewall reference containing the ID to check against its firewall
> + *				controller
> + */
> +void stm32_firewall_release_access(struct stm32_firewall *firewall);
> +
> +/**
> + * stm32_firewall_grant_access_by_id - Request firewall access rights of a given device
> + *				       based on a specific firewall ID
> + *
> + * Warnings:
> + * There is no way to ensure that the given ID will correspond to the firewall referenced in the
> + * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
> + * function must be used with caution.
> + * This function should be used for subsystem resources that do not have the same firewall ID
> + * as their parent.
> + * U32_MAX is an invalid ID.
> + *
> + * @firewall			Firewall reference containing the firewall controller
> + * @subsystem_id		Firewall ID of the subsystem resource
> + *
> + * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
> + * appropriate errno code if error occurred
> + */
> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);

Can we store all registered IDs that were found by populate_bus
functio, or is it expected when this function was called before
populate_bus call?

> +
> +/**
> + * stm32_firewall_release_access_by_id - Release access granted from a call to
> + *					 stm32_firewall_grant_access_by_id().
> + *
> + * Warnings:
> + * There is no way to ensure that the given ID will correspond to the firewall referenced in the
> + * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
> + * function must be used with caution.
> + * This function should be used for subsystem resources that do not have the same firewall ID
> + * as their parent.
> + * U32_MAX is an invalid ID.
> + *
> + * @firewall			Firewall reference containing the firewall controller
> + * @subsystem_id		Firewall ID of the subsystem resource
> + */
> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);
> +
> +#else /* CONFIG_STM32_FIREWALL */
> +
> +int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall)
> +{
> +	return -ENODEV;
> +}
> +
> +int stm32_firewall_grant_access(struct stm32_firewall *firewall)
> +{
> +	return -ENODEV;
> +}
> +
> +void stm32_firewall_release_access(struct stm32_firewall *firewall)
> +{
> +}
> +
> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
> +{
> +	return -ENODEV;
> +}
> +
> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
> +{
> +}
> +
> +#endif /* CONFIG_STM32_FIREWALL */
> +#endif /* STM32_FIREWALL_DEVICE_H */
Gatien CHEVALLIER July 7, 2023, 2 p.m. UTC | #5
Hello Greg,

On 7/7/23 12:37, Greg KH wrote:
> On Wed, Jul 05, 2023 at 07:27:54PM +0200, Gatien Chevallier wrote:
>> Introduce a firewall framework that offers to firewall consumers different
>> firewall services such as the ability to check their access rights against
>> their firewall controller(s).
>>
>> The firewall framework offers a generic API that is defined in firewall
>> controllers drivers to best fit the specificity of each firewall.
> 
> But you aren't defining a "generic" api here, you are defining a
> specific one for your specific hardware.
> 
> Or am I missing something?
> 

This framework is indeed ST-oriented, I should have specified :
"...offers a generic API for STM32 firewall controllers that is defined
in their drivers...". Will change in V2

>>
>> There are various types of firewalls:
>> -Peripheral firewalls that filter accesses to peripherals
>> -Memory firewalls that filter accesses to memories or memory regions
>> -Resource firewalls that filter accesses to internal resources such as
>> reset and clock controllers
>>
>> A firewall controller must be probed at arch_initcall level and register
>> to the framework so that consumers can use their services.
> 
> Why must it happen at arch_initcall?  So it can never be a module?  That
> feels wrong.
> 

Rob asked the same question.

I responded under his comment, I'm not quite sure how to handle it with
fw_devlink for dependencies with drivers that are probed at early init
levels.

>>
>> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
>> ---
>>   MAINTAINERS                               |   5 +
>>   arch/arm64/Kconfig.platforms              |   1 +
>>   drivers/bus/Kconfig                       |  10 +
>>   drivers/bus/Makefile                      |   1 +
>>   drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
>>   drivers/bus/stm32_firewall.h              |  83 +++++++
>>   include/linux/bus/stm32_firewall_device.h | 134 ++++++++++++
>>   7 files changed, 486 insertions(+)
>>   create mode 100644 drivers/bus/stm32_firewall.c
>>   create mode 100644 drivers/bus/stm32_firewall.h
>>   create mode 100644 include/linux/bus/stm32_firewall_device.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 41385f01fa98..fabf95ba9b86 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -20123,6 +20123,11 @@ T:	git git://linuxtv.org/media_tree.git
>>   F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
>>   F:	drivers/media/i2c/st-mipid02.c
>>   
>> +ST STM32 FIREWALL
>> +M:	Gatien Chevallier <gatien.chevallier@foss.st.com>
>> +S:	Maintained
>> +F:	drivers/bus/stm32_firewall.c
>> +
>>   ST STM32 I2C/SMBUS DRIVER
>>   M:	Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
>>   M:	Alain Volmat <alain.volmat@foss.st.com>
>> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
>> index 6069120199bb..5a46e90f1e4e 100644
>> --- a/arch/arm64/Kconfig.platforms
>> +++ b/arch/arm64/Kconfig.platforms
>> @@ -293,6 +293,7 @@ config ARCH_STM32
>>   	select ARM_SMC_MBOX
>>   	select ARM_SCMI_PROTOCOL
>>   	select COMMON_CLK_SCMI
>> +	select STM32_FIREWALL
>>   	help
>>   	  This enables support for ARMv8 based STMicroelectronics
>>   	  STM32 family, including:
>> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
>> index fcfa280df98a..4d54a7ea52b2 100644
>> --- a/drivers/bus/Kconfig
>> +++ b/drivers/bus/Kconfig
>> @@ -163,6 +163,16 @@ config QCOM_SSC_BLOCK_BUS
>>   	  i2c/spi/uart controllers, a hexagon core, and a clock controller
>>   	  which provides clocks for the above.
>>   
>> +config STM32_FIREWALL
>> +	bool "STM32 Firewall framework"
>> +	depends on ARCH_STM32
> 
> Why this dependency?
> 
>> +	default MACH_STM32MP157 || MACH_STM32MP13 || MACH_STM32MP25
>> +	help
>> +	  Say y to enable firewall framework and its services. Firewall
>> +	  controllers will be able to register to the framework. Firewall
>> +	  controllers must be initialized and register to the firewall framework
>> +	  at arch_initcall level.
> 
> This needs better wording saying it is only for stm32 devices.
> 

Ack, will change in V2.

>> +
>>   config SUN50I_DE2_BUS
>>   	bool "Allwinner A64 DE2 Bus Driver"
>>   	  default ARM64
>> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
>> index d90eed189a65..fc0511450ec2 100644
>> --- a/drivers/bus/Makefile
>> +++ b/drivers/bus/Makefile
>> @@ -26,6 +26,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
>>   obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
>>   obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
>>   obj-$(CONFIG_QCOM_SSC_BLOCK_BUS)	+= qcom-ssc-block-bus.o
>> +obj-$(CONFIG_STM32_FIREWALL)	+= stm32_firewall.o
>>   obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
>>   obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
>>   obj-$(CONFIG_OF)		+= simple-pm-bus.o
>> diff --git a/drivers/bus/stm32_firewall.c b/drivers/bus/stm32_firewall.c
>> new file mode 100644
>> index 000000000000..510db5bc6eaf
>> --- /dev/null
>> +++ b/drivers/bus/stm32_firewall.c
>> @@ -0,0 +1,252 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
> 
> Are you _SURE_ this needs to be "or later"?  Sorry, I have to ask.
> 
> thanks,
> 
> greg k-h

I'll change to (GPL-2.0-only OR BSD-3-Clause) :)

Best regards,
Gatien
Gatien CHEVALLIER July 7, 2023, 3:01 p.m. UTC | #6
Hello Oleksii,

On 7/7/23 15:50, Oleksii Moisieiev wrote:
> 
> Gatien Chevallier <gatien.chevallier@foss.st.com> writes:
> 
>> Introduce a firewall framework that offers to firewall consumers different
>> firewall services such as the ability to check their access rights against
>> their firewall controller(s).
>>
>> The firewall framework offers a generic API that is defined in firewall
>> controllers drivers to best fit the specificity of each firewall.
>>
>> There are various types of firewalls:
>> -Peripheral firewalls that filter accesses to peripherals
>> -Memory firewalls that filter accesses to memories or memory regions
>> -Resource firewalls that filter accesses to internal resources such as
>> reset and clock controllers
>>
>> A firewall controller must be probed at arch_initcall level and register
>> to the framework so that consumers can use their services.
>>
>> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
>> ---
>>   MAINTAINERS                               |   5 +
>>   arch/arm64/Kconfig.platforms              |   1 +
>>   drivers/bus/Kconfig                       |  10 +
>>   drivers/bus/Makefile                      |   1 +
>>   drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
>>   drivers/bus/stm32_firewall.h              |  83 +++++++
>>   include/linux/bus/stm32_firewall_device.h | 134 ++++++++++++
>>   7 files changed, 486 insertions(+)
>>   create mode 100644 drivers/bus/stm32_firewall.c
>>   create mode 100644 drivers/bus/stm32_firewall.h
>>   create mode 100644 include/linux/bus/stm32_firewall_device.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 41385f01fa98..fabf95ba9b86 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -20123,6 +20123,11 @@ T:	git git://linuxtv.org/media_tree.git
>>   F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
>>   F:	drivers/media/i2c/st-mipid02.c
>>   
>> +ST STM32 FIREWALL
>> +M:	Gatien Chevallier <gatien.chevallier@foss.st.com>
>> +S:	Maintained
>> +F:	drivers/bus/stm32_firewall.c
>> +
>>   ST STM32 I2C/SMBUS DRIVER
>>   M:	Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
>>   M:	Alain Volmat <alain.volmat@foss.st.com>
>> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
>> index 6069120199bb..5a46e90f1e4e 100644
>> --- a/arch/arm64/Kconfig.platforms
>> +++ b/arch/arm64/Kconfig.platforms
>> @@ -293,6 +293,7 @@ config ARCH_STM32
>>   	select ARM_SMC_MBOX
>>   	select ARM_SCMI_PROTOCOL
>>   	select COMMON_CLK_SCMI
>> +	select STM32_FIREWALL
>>   	help
>>   	  This enables support for ARMv8 based STMicroelectronics
>>   	  STM32 family, including:
>> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
>> index fcfa280df98a..4d54a7ea52b2 100644
>> --- a/drivers/bus/Kconfig
>> +++ b/drivers/bus/Kconfig
>> @@ -163,6 +163,16 @@ config QCOM_SSC_BLOCK_BUS
>>   	  i2c/spi/uart controllers, a hexagon core, and a clock controller
>>   	  which provides clocks for the above.
>>   
>> +config STM32_FIREWALL
>> +	bool "STM32 Firewall framework"
>> +	depends on ARCH_STM32
>> +	default MACH_STM32MP157 || MACH_STM32MP13 || MACH_STM32MP25
>> +	help
>> +	  Say y to enable firewall framework and its services. Firewall
>> +	  controllers will be able to register to the framework. Firewall
>> +	  controllers must be initialized and register to the firewall framework
>> +	  at arch_initcall level.
>> +
>>   config SUN50I_DE2_BUS
>>   	bool "Allwinner A64 DE2 Bus Driver"
>>   	  default ARM64
>> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
>> index d90eed189a65..fc0511450ec2 100644
>> --- a/drivers/bus/Makefile
>> +++ b/drivers/bus/Makefile
>> @@ -26,6 +26,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
>>   obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
>>   obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
>>   obj-$(CONFIG_QCOM_SSC_BLOCK_BUS)	+= qcom-ssc-block-bus.o
>> +obj-$(CONFIG_STM32_FIREWALL)	+= stm32_firewall.o
>>   obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
>>   obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
>>   obj-$(CONFIG_OF)		+= simple-pm-bus.o
>> diff --git a/drivers/bus/stm32_firewall.c b/drivers/bus/stm32_firewall.c
>> new file mode 100644
>> index 000000000000..510db5bc6eaf
>> --- /dev/null
>> +++ b/drivers/bus/stm32_firewall.c
>> @@ -0,0 +1,252 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +/*
>> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
>> + */
>> +
>> +#include <linux/bitfield.h>
>> +#include <linux/bits.h>
>> +#include <linux/bus/stm32_firewall_device.h>
>> +#include <linux/device.h>
>> +#include <linux/err.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/types.h>
>> +
>> +#include "stm32_firewall.h"
>> +
>> +/* Corresponds to STM32_FIREWALL_MAX_EXTRA_ARGS + firewall controller reference + firewall ID */
>> +#define STM32_FIREWALL_MAX_ARGS		(STM32_FIREWALL_MAX_EXTRA_ARGS + 2)
>> +
>> +static LIST_HEAD(firewall_controller_list);
>> +static DEFINE_MUTEX(firewall_controller_list_lock);
>> +
>> +static int stm32_firewall_get_id(struct device_node *np, u32 *id)
>> +{
>> +	u32 feature_domain_cell[2];
>> +
>> +	/* Get property from device node */
>> +	if (of_property_read_u32_array(np, "feature-domains",
>> +				       feature_domain_cell,
>> +				       ARRAY_SIZE(feature_domain_cell))) {
>> +		pr_err("Unable to find get firewall ID property\n");
>> +		return -ENODEV;
>> +	}
>> +
>> +	*id = feature_domain_cell[1];
>> +
>> +	return 0;
>> +}
>> +
>> +/* Firewall device API */
>> +
>> +int stm32_firewall_get_firewall(struct device_node *np,
>> +				struct stm32_firewall *firewall)
>> +{
>> +	struct stm32_firewall_controller *ctrl;
>> +	struct of_phandle_args args;
>> +	u32 controller_phandle;
>> +	bool match = false;
>> +	size_t i;
>> +	int err;
>> +
>> +	if (!firewall)
>> +		return -EINVAL;
>> +
>> +	/* The controller phandle is always the first argument of the feature-domains property. */
>> +	err = of_property_read_u32(np, "feature-domains", &controller_phandle);
>> +	if (err) {
>> +		pr_err("Unable to get feature-domains property for node %s\n", np->full_name);
>> +		return err;
>> +	}
>> +
>> +	/* Parse property with phandle parsed out */
>> +	err = of_parse_phandle_with_args(np, "feature-domains", "#feature-domain-cells", 0, &args);
>> +	if (err) {
>> +		pr_err("Unable to read feature-domains arguments for node %s\n", np->full_name);
>> +		return err;
>> +	}
>> +
>> +	/* The phandle is parsed out */
>> +	if (args.args_count > STM32_FIREWALL_MAX_ARGS - 1)
>> +		return -EINVAL;
>> +
>> +	of_node_put(np);
>> +
>> +	/* Check if the parsed phandle corresponds to a registered firewall controller */
>> +	mutex_lock(&firewall_controller_list_lock);
>> +	list_for_each_entry(ctrl, &firewall_controller_list, entry) {
>> +		if (ctrl->dev->of_node->phandle == controller_phandle) {
>> +			match = true;
>> +			firewall->firewall_ctrl = ctrl;
>> +			break;
>> +		}
>> +	}
>> +	mutex_unlock(&firewall_controller_list_lock);
>> +	if (!match) {
>> +		firewall->firewall_ctrl = NULL;
>> +		pr_err("No firewall controller registered for %s\n", np->full_name);
>> +		return -ENODEV;
>> +	}
>> +
>> +	/*
>> +	 * The firewall ID is always the second argument of the feature-domains property.
>> +	 * The first argument is already parsed out, so args.args[0] is the second argument.
>> +	 */
>> +	firewall->firewall_id = args.args[0];
>> +
>> +	/* Extra args start at the third argument */
>> +	for (i = 0; i < args.args_count; i++)
>> +		firewall->extra_args[i] = args.args[i + 1];
>> +
>> +	/* Remove the firewall ID arg that is not an extra argument */
>> +	if (args.args_count >= 1)
>> +		firewall->extra_args_size = args.args_count - 1;
> 
> As I can see you support some extra args, that can be provided in the
> feature-domain property. But in the binding description I see maxItems:
> 2. I beliewe this should be highlighted in bindings description.
> 

Good point, maybe it would be better to define a high maxItem value in
the binding description that is aligned with STM32_FIREWALL_MAX_ARGS.

>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(stm32_firewall_get_firewall);
>> +
>> +int stm32_firewall_grant_access(struct stm32_firewall *firewall)
>> +{
>> +	struct stm32_firewall_controller *firewall_controller;
>> +
>> +	if (!firewall || firewall->firewall_id == U32_MAX)
>> +		return -EINVAL;
>> +
>> +	firewall_controller = firewall->firewall_ctrl;
>> +
>> +	if (!firewall_controller)
>> +		return -ENODEV;
>> +
>> +	return firewall_controller->grant_access(firewall_controller, firewall->firewall_id);
>> +}
>> +EXPORT_SYMBOL_GPL(stm32_firewall_grant_access);
>> +
>> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>> +{
>> +	struct stm32_firewall_controller *firewall_controller;
>> +
>> +	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX)
>> +		return -EINVAL;
>> +
>> +	firewall_controller = firewall->firewall_ctrl;
>> +
>> +	if (!firewall_controller)
>> +		return -ENODEV;
>> +
>> +	return firewall_controller->grant_access(firewall_controller, subsystem_id);
>> +}
>> +EXPORT_SYMBOL_GPL(stm32_firewall_grant_access_by_id);
>> +
>> +void stm32_firewall_release_access(struct stm32_firewall *firewall)
>> +{
>> +	struct stm32_firewall_controller *firewall_controller;
>> +
>> +	if (!firewall || firewall->firewall_id == U32_MAX) {
>> +		pr_err("Incorrect arguments when releasing a firewall access");
>> +		return;
>> +	}
>> +
>> +	firewall_controller = firewall->firewall_ctrl;
>> +
>> +	if (!firewall_controller) {
>> +		pr_debug("No firewall controller to release");
>> +		return;
>> +	}
>> +
>> +	firewall_controller->release_access(firewall_controller, firewall->firewall_id);
>> +}
>> +EXPORT_SYMBOL_GPL(stm32_firewall_release_access);
>> +
>> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>> +{
>> +	struct stm32_firewall_controller *firewall_controller;
>> +
>> +	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX) {
>> +		pr_err("Incorrect arguments when releasing a firewall access");
>> +		return;
>> +	}
>> +
>> +	firewall_controller = firewall->firewall_ctrl;
>> +
>> +	if (!firewall_controller) {
>> +		pr_debug("No firewall controller to release");
>> +		return;
>> +	}
>> +
>> +	firewall_controller->release_access(firewall_controller, subsystem_id);
>> +}
>> +EXPORT_SYMBOL_GPL(stm32_firewall_release_access_by_id);
>> +
>> +/* Firewall controller API */
>> +
>> +int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller)
>> +{
>> +	pr_info("Registering firewall controller %s", dev_name(firewall_controller->dev));
>> +
>> +	if (!firewall_controller)
>> +		return -ENODEV;
>> +
>> +	mutex_lock(&firewall_controller_list_lock);
>> +	list_add_tail(&firewall_controller->entry, &firewall_controller_list);
>> +	mutex_unlock(&firewall_controller_list_lock);
>> +
>> +	return 0;
>> +
>> +}
>> +
>> +void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller)
>> +{
>> +	struct stm32_firewall_controller *ctrl, *tmp;
>> +	bool controller_removed = false;
>> +
>> +	if (!firewall_controller) {
>> +		pr_debug("Null reference while unregistering firewall controller");
>> +		return;
>> +	}
>> +
>> +	mutex_lock(&firewall_controller_list_lock);
>> +	list_for_each_entry_safe(ctrl, tmp, &firewall_controller_list, entry) {
>> +		if (ctrl == firewall_controller) {
>> +			controller_removed = true;
>> +			list_del_init(&ctrl->entry);
>> +			break;
>> +		}
>> +	}
> IIUC list_for_each_entry_safe protects you from removing node during
> loop. But all list operations are done under
> firewall_controller_list_lock mutex. I beliewe there is no need for
> _safe call under the mutex because removing node during loop is
> impossible. I think it worth investigation if it's safe to use
> list_for_each_entry_safe without lock.

AFAICT, list_for_each_entry_safe() does not protect against concurrent
accesses, so I'll keep the mutex lock.

Deleting while iterating will cause trouble if not using the safe
version. I think it is fine as it is.

>> +	mutex_unlock(&firewall_controller_list_lock);
>> +
>> +	if (!controller_removed)
>> +		pr_debug("There was no firewall controller named %s to unregister",
>> +			 dev_name(firewall_controller->dev));
>> +}
>> +
>> +void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller)
>> +{
>> +	struct device_node *child;
>> +	struct device *parent;
>> +	u32 firewall_id;
>> +	int err;
>> +
>> +	parent = firewall_controller->dev;
>> +
>> +	dev_dbg(parent, "Populating %s system bus\n", dev_name(firewall_controller->dev));
>> +
>> +	for_each_available_child_of_node(dev_of_node(parent), child) {
>> +		err = stm32_firewall_get_id(child, &firewall_id);
>> +		if (err < 0 ||
>> +		    firewall_controller->grant_access(firewall_controller, firewall_id)) {
>> +			/*
>> +			 * Peripheral access not allowed or not defined.
>> +			 * Mark the node as populated so platform bus won't probe it
>> +			 */
>> +			of_node_set_flag(child, OF_POPULATED);
>> +			dev_err(parent, "%s: Device driver will not be probed\n",
>> +				child->full_name);
>> +		}
>> +	}
>> +}
>> diff --git a/drivers/bus/stm32_firewall.h b/drivers/bus/stm32_firewall.h
>> new file mode 100644
>> index 000000000000..8d92e8c1ab77
>> --- /dev/null
>> +++ b/drivers/bus/stm32_firewall.h
>> @@ -0,0 +1,83 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/*
>> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
>> + */
>> +
>> +#ifndef _STM32_FIREWALL_H
>> +#define _STM32_FIREWALL_H
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/list.h>
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/types.h>
>> +
>> +/**
>> + * STM32_PERIPHERAL_FIREWALL:		This type of firewall protects peripherals
> 
> Intendation
> 
>> + * STM32_MEMORY_FIREWALL:		This type of firewall protects memories/subsets of memory
>> + *					zones
>> + * STM32_RESOURCE_FIREWALL:		This type of firewall protects internal resources
>> + * STM32_NOTYPE_FIREWALL:		Undefined firewall type
>> + */
>> +
>> +#define STM32_PERIPHERAL_FIREWALL	BIT(1)
> 
> Intendation
> 

I'm sorry but I don't understand. I indent with tabs, maybe this is why
it appears strange here. The indentation is fine, same for others below.

>> +#define STM32_MEMORY_FIREWALL		BIT(2)
>> +#define STM32_RESOURCE_FIREWALL		BIT(3)
>> +#define STM32_NOTYPE_FIREWALL		BIT(4)
>> +
>> +/**
>> + * struct stm32_firewall_controller - Information on firewall controller supplying services
>> + *
>> + * @name			Name of the firewall controller
>> + * @dev				Device reference of the firewall controller
> 
> Intendation
> 
>> + * @mmio			Base address of the firewall controller
>> + * @entry			List entry of the firewall controller list
>> + * @type			Type of firewall
>> + * @max_entries			Number of entries covered by the firewall
> Intendation
> 
>> + * @grant_access		Callback used to grant access for a device access against a
>> + *				firewall controller
>> + * @release_access		Callback used to release resources taken by a device when access was
>> + *				granted
>> + * @grant_memory_range_access	Callback used to grant access for a device to a given memory region
>> + */
>> +struct stm32_firewall_controller {
>> +	const char *name;
>> +	struct device *dev;
>> +	void __iomem *mmio;
>> +	struct list_head entry;
>> +	unsigned int type;
>> +	unsigned int max_entries;
>> +
>> +	int (*grant_access)(struct stm32_firewall_controller *ctrl, u32 id);
>> +	void (*release_access)(struct stm32_firewall_controller *ctrl, u32 id);
>> +	int (*grant_memory_range_access)(struct stm32_firewall_controller *ctrl, phys_addr_t paddr,
>> +					 size_t size);
>> +};
>> +
>> +/**
>> + * int stm32_firewall_controller_register - Register a firewall controller to the STM32 firewall
>> + *					    framework
>> + * @firewall_controller		Firewall controller to register
>> + *
>> + * Returns 0 in case of success or -ENODEV if no controller was given.
>> + */
>> +int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller);
>> +
>> +/**
>> + * int stm32_firewall_controller_unregister - Unregister a firewall controller from the STM32
>> + *					      firewall framework
>> + * @firewall_controller		Firewall controller to unregister
>> + */
>> +void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller);
>> +
>> +/**
>> + * stm32_firewall_populate_bus - Populate device tree nodes that have a correct firewall
>> + *				 configuration. This is used at boot-time only, as a sanity check
>> + *				 between device tree and firewalls hardware configurations to
>> + *				 prevent a kernel crash when a device driver is not granted access
>> + *
>> + * @firewall_controller		Firewall controller which nodes will be populated or not
>> + */
>> +void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller);
>> +
>> +#endif /* _STM32_FIREWALL_H */
>> diff --git a/include/linux/bus/stm32_firewall_device.h b/include/linux/bus/stm32_firewall_device.h
>> new file mode 100644
>> index 000000000000..ccaecea7fc6c
>> --- /dev/null
>> +++ b/include/linux/bus/stm32_firewall_device.h
>> @@ -0,0 +1,134 @@
>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>> +/*
>> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
>> + */
>> +
>> +#ifndef STM32_FIREWALL_DEVICE_H
>> +#define STM32_FIREWALL_DEVICE_H
>> +
>> +#include <linux/of.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/types.h>
>> +
>> +#define STM32_FIREWALL_MAX_EXTRA_ARGS		5
> 
> It's not clear to me why it's 5. Comment above sais this is
> implementation defined. Maybe this parameter can be configurable?
> 

Maybe it should be part of compat_data of firewall controllers :)

>> +
>> +/* Opaque reference to stm32_firewall_controller */
>> +struct stm32_firewall_controller;
>> +
>> +/**
>> + * stm32_firewall - Information on a device's firewall. Each device can have more than one firewall.
>> + *
>> + * @firewall_ctrl		Pointer referencing a firewall controller of the device. It is
>> + *				opaque so a device cannot manipulate the controller's ops or access
>> + *				the controller's data
>> + * @extra_args			Extra arguments that are implementation dependent
>> + * @extra_args_size		Number of extra arguments
>> + * @firewall_id			Firewall ID associated the device for this firewall controller
>> + */
>> +struct stm32_firewall {
>> +	struct stm32_firewall_controller *firewall_ctrl;
>> +	u32 extra_args[STM32_FIREWALL_MAX_EXTRA_ARGS];
>> +	size_t extra_args_size;
>> +	u32 firewall_id;
>> +};
>> +
>> +#if IS_ENABLED(CONFIG_STM32_FIREWALL)
>> +/**
>> + * stm32_firewall_get_firewall - Get the firewall(s) associated to given device.
>> + *				 The firewall controller reference is always the first argument
>> + *				 of the feature-domains property.
>> + *				 The firewall ID is always the second argument of the
>> + *				 feature-domains property.
>> + *
>> + * @np				Device node to parse
> 
> Intendation
> 
>> + * @firewall			Resulting firewall reference(s)
>> + *
>> + * Returns 0 on success, -ENODEV if there's no match with a firewall controller or appropriate errno
>> + * code if error occurred.
>> + */
>> +int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall);
>> +
>> +/**
>> + * stm32_firewall_grant_access - Request firewall access rights and grant access.
>> + *
>> + * @firewall			Firewall reference containing the ID to check against its firewall
>> + *				controller
>> + *
>> + * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
>> + * appropriate errno code if error occurred
>> + */
>> +int stm32_firewall_grant_access(struct stm32_firewall *firewall);
>> +
>> +/**
>> + * stm32_firewall_release_access - Release access granted from a call to
>> + *				   stm32_firewall_grant_access().
>> + *
>> + * @firewall			Firewall reference containing the ID to check against its firewall
>> + *				controller
>> + */
>> +void stm32_firewall_release_access(struct stm32_firewall *firewall);
>> +
>> +/**
>> + * stm32_firewall_grant_access_by_id - Request firewall access rights of a given device
>> + *				       based on a specific firewall ID
>> + *
>> + * Warnings:
>> + * There is no way to ensure that the given ID will correspond to the firewall referenced in the
>> + * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
>> + * function must be used with caution.
>> + * This function should be used for subsystem resources that do not have the same firewall ID
>> + * as their parent.
>> + * U32_MAX is an invalid ID.
>> + *
>> + * @firewall			Firewall reference containing the firewall controller
>> + * @subsystem_id		Firewall ID of the subsystem resource
>> + *
>> + * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
>> + * appropriate errno code if error occurred
>> + */
>> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);
> 
> Can we store all registered IDs that were found by populate_bus
> functio, or is it expected when this function was called before
> populate_bus call?
> 

This function is intended to be used by devices that needs to check
specific ID. Maybe IDs of peripherals that do not have a driver in
Linux / driver isn't probed / ...

About storing all IDs found when populating the bus, do you have some
use in mind? :) Else I'd prefer to save some memory.

Best regards,
Gatien

>> +
>> +/**
>> + * stm32_firewall_release_access_by_id - Release access granted from a call to
>> + *					 stm32_firewall_grant_access_by_id().
>> + *
>> + * Warnings:
>> + * There is no way to ensure that the given ID will correspond to the firewall referenced in the
>> + * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
>> + * function must be used with caution.
>> + * This function should be used for subsystem resources that do not have the same firewall ID
>> + * as their parent.
>> + * U32_MAX is an invalid ID.
>> + *
>> + * @firewall			Firewall reference containing the firewall controller
>> + * @subsystem_id		Firewall ID of the subsystem resource
>> + */
>> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);
>> +
>> +#else /* CONFIG_STM32_FIREWALL */
>> +
>> +int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall)
>> +{
>> +	return -ENODEV;
>> +}
>> +
>> +int stm32_firewall_grant_access(struct stm32_firewall *firewall)
>> +{
>> +	return -ENODEV;
>> +}
>> +
>> +void stm32_firewall_release_access(struct stm32_firewall *firewall)
>> +{
>> +}
>> +
>> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>> +{
>> +	return -ENODEV;
>> +}
>> +
>> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>> +{
>> +}
>> +
>> +#endif /* CONFIG_STM32_FIREWALL */
>> +#endif /* STM32_FIREWALL_DEVICE_H */
> 
>
Rob Herring (Arm) July 7, 2023, 3:07 p.m. UTC | #7
On Fri, Jul 07, 2023 at 03:43:15PM +0200, Gatien CHEVALLIER wrote:
> 
> 
> On 7/6/23 17:09, Rob Herring wrote:
> > On Wed, Jul 05, 2023 at 07:27:54PM +0200, Gatien Chevallier wrote:
> > > Introduce a firewall framework that offers to firewall consumers different
> > > firewall services such as the ability to check their access rights against
> > > their firewall controller(s).
> > > 
> > > The firewall framework offers a generic API that is defined in firewall
> > > controllers drivers to best fit the specificity of each firewall.
> > > 
> > > There are various types of firewalls:
> > > -Peripheral firewalls that filter accesses to peripherals
> > > -Memory firewalls that filter accesses to memories or memory regions
> > > -Resource firewalls that filter accesses to internal resources such as
> > > reset and clock controllers
> > 
> > How do resource firewalls work? Access to registers for some clocks in a
> > clock controller are disabled? Or something gates off clocks/resets to
> > a block?
> 
> To take a practical example:
> 
> A clock controller can be firewall-aware and have its own firewall registers
> to configure. To access a clock/reset that is handled this way, a device
> would need to check this "resource firewall". I thought that for these kinds
> of hardware blocks, having a common API would help.

We already have the concept of 'protected clocks' which are ones 
controlled by secure mode which limits what Linux can do with them. I 
think you should extend this mechanism if needed and use the existing 
clock/reset APIs for managing resources.

> > 
> > It might make more sense for "resource" accesses to be managed within
> > those resource APIs (i.e. the clock and reset frameworks) and leave this
> > framework to bus accesses.
> > 
> 
> Okay, I'll drop this for V2 if you find that the above explaination do not
> justify this.
> 
> > > A firewall controller must be probed at arch_initcall level and register
> > > to the framework so that consumers can use their services.
> > 
> > initcall ordering hacks should not be needed. We have both deferred
> > probe and fw_devlinks to avoid that problem.
> > 
> 
> Greg also doubts this.
> 
> Drivers like reset/clock controllers drivers (core_initcall level) will have
> a dependency on the firewall controllers in order to initialize their
> resources. I was not sure how to manage these dependencies.
> 
> Now, looking at init/main.c, I've realized that core_initcall() level comes
> before arch_initcall() level...
> 
> If managed by fw_devlink, the feature-domains property should be supported
> as well I suppose? I'm not sure how to handle this properly. I'd welcome
> your suggestion.

DT parent/child child dependencies are already handled which might be 
enough for you. Otherwise, adding a new provider/consumer binding is a 
couple of lines to add the property names. See drivers/of/property.c.

> > > Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
> > > ---
> > >   MAINTAINERS                               |   5 +
> > >   arch/arm64/Kconfig.platforms              |   1 +
> > >   drivers/bus/Kconfig                       |  10 +
> > >   drivers/bus/Makefile                      |   1 +
> > >   drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
> > >   drivers/bus/stm32_firewall.h              |  83 +++++++
> > 
> > Why something stm32 specific? We know there are multiple platforms
> > wanting something in this area. Wasn't the last attempt common?
> > 
> > For a common binding, I'm not eager to accept anything new with only 1
> > user.
> > 
> 
> Last attempt was common for the feature-domain bindings. The system-bus
> driver was ST-specific. I don't know if other platforms needs this kind
> of framework. Are you suggesting that this framework should be generic? Or
> that this framework should have a st-specific property?

Ah right, the posting for SCMI device permissions was the binding only. 
The binding should be generic and support more than 1 user. That somewhat 
implies a generic framework, but not necessarily.

> I've oriented this firewall framework to serve ST purpose. There may be a
> need for other platforms but I'm not sure that this framework serves them
> well. One can argue that it is quite minimalist and covers basic purposes of
> a hardware firewall but I would need more feedback from other vendors to
> submit it as a generic one.

We already know there are at least 2 users. Why would we make the 2nd 
user refactor your driver into a common framework?

[...]

> > > +int stm32_firewall_get_firewall(struct device_node *np,
> > > +				struct stm32_firewall *firewall)
> > > +{
> > > +	struct stm32_firewall_controller *ctrl;
> > > +	struct of_phandle_args args;
> > > +	u32 controller_phandle;
> > > +	bool match = false;
> > > +	size_t i;
> > > +	int err;
> > > +
> > > +	if (!firewall)
> > > +		return -EINVAL;
> > > +
> > > +	/* The controller phandle is always the first argument of the feature-domains property. */
> > > +	err = of_property_read_u32(np, "feature-domains", &controller_phandle);
> > 
> > Why do you need to parse the property twice?
> > 
> 
> The first parsing is to have the first argument, which is the controller
> phandle. The second parsing is here to get the firewall arguments based on
> the number of arguments defined by #feature-domain-cells. Maybe using
> of_property_read_u32_array() would be better. 

No. It's not a u32 array. It's a phandle+args property, so you should 
only use phandle+args APIs.

> I did not want to close the
> door for supporting several feature domain controllers, hence multiple
> phandles. of_parse_phandle_with_args() seemed fine for this purpose but the
> phandle is parsed out.

There's an iterator for handling multiple phandle+args cases.

Rob
Greg Kroah-Hartman July 7, 2023, 3:10 p.m. UTC | #8
On Fri, Jul 07, 2023 at 04:00:23PM +0200, Gatien CHEVALLIER wrote:
> I'll change to (GPL-2.0-only OR BSD-3-Clause) :)

If you do that, I'll require a lawyer to sign off on it to verify that
you all know EXACTLY the work involved in dealing with dual-licensed
kernel code.  Sorry, licenses aren't jokes.

thanks,

greg k-h
Gatien CHEVALLIER July 7, 2023, 3:44 p.m. UTC | #9
On 7/7/23 17:10, Greg KH wrote:
> On Fri, Jul 07, 2023 at 04:00:23PM +0200, Gatien CHEVALLIER wrote:
>> I'll change to (GPL-2.0-only OR BSD-3-Clause) :)
> 
> If you do that, I'll require a lawyer to sign off on it to verify that
> you all know EXACTLY the work involved in dealing with dual-licensed
> kernel code.  Sorry, licenses aren't jokes.

I was worried about the interactions with software running on BSD
license, hence my (poorly written) proposal. Looking back at it
there's no good reason to use a dual-license here.
GPL-2.0-only is fine.

> 
> thanks,
> 
> greg k-h
Oleksii Moisieiev July 7, 2023, 4:01 p.m. UTC | #10
Gatien CHEVALLIER <gatien.chevallier@foss.st.com> writes:

Hello Gatien,

> Hello Oleksii,
>
> On 7/7/23 15:50, Oleksii Moisieiev wrote:
>> Gatien Chevallier <gatien.chevallier@foss.st.com> writes:
>> 
>>> Introduce a firewall framework that offers to firewall consumers different
>>> firewall services such as the ability to check their access rights against
>>> their firewall controller(s).
>>>
>>> The firewall framework offers a generic API that is defined in firewall
>>> controllers drivers to best fit the specificity of each firewall.
>>>
>>> There are various types of firewalls:
>>> -Peripheral firewalls that filter accesses to peripherals
>>> -Memory firewalls that filter accesses to memories or memory regions
>>> -Resource firewalls that filter accesses to internal resources such as
>>> reset and clock controllers
>>>
>>> A firewall controller must be probed at arch_initcall level and register
>>> to the framework so that consumers can use their services.
>>>
>>> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
>>> ---
>>>   MAINTAINERS                               |   5 +
>>>   arch/arm64/Kconfig.platforms              |   1 +
>>>   drivers/bus/Kconfig                       |  10 +
>>>   drivers/bus/Makefile                      |   1 +
>>>   drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
>>>   drivers/bus/stm32_firewall.h              |  83 +++++++
>>>   include/linux/bus/stm32_firewall_device.h | 134 ++++++++++++
>>>   7 files changed, 486 insertions(+)
>>>   create mode 100644 drivers/bus/stm32_firewall.c
>>>   create mode 100644 drivers/bus/stm32_firewall.h
>>>   create mode 100644 include/linux/bus/stm32_firewall_device.h
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index 41385f01fa98..fabf95ba9b86 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -20123,6 +20123,11 @@ T:	git git://linuxtv.org/media_tree.git
>>>   F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
>>>   F:	drivers/media/i2c/st-mipid02.c
>>>   +ST STM32 FIREWALL
>>> +M:	Gatien Chevallier <gatien.chevallier@foss.st.com>
>>> +S:	Maintained
>>> +F:	drivers/bus/stm32_firewall.c
>>> +
>>>   ST STM32 I2C/SMBUS DRIVER
>>>   M:	Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
>>>   M:	Alain Volmat <alain.volmat@foss.st.com>
>>> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
>>> index 6069120199bb..5a46e90f1e4e 100644
>>> --- a/arch/arm64/Kconfig.platforms
>>> +++ b/arch/arm64/Kconfig.platforms
>>> @@ -293,6 +293,7 @@ config ARCH_STM32
>>>   	select ARM_SMC_MBOX
>>>   	select ARM_SCMI_PROTOCOL
>>>   	select COMMON_CLK_SCMI
>>> +	select STM32_FIREWALL
>>>   	help
>>>   	  This enables support for ARMv8 based STMicroelectronics
>>>   	  STM32 family, including:
>>> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
>>> index fcfa280df98a..4d54a7ea52b2 100644
>>> --- a/drivers/bus/Kconfig
>>> +++ b/drivers/bus/Kconfig
>>> @@ -163,6 +163,16 @@ config QCOM_SSC_BLOCK_BUS
>>>   	  i2c/spi/uart controllers, a hexagon core, and a clock controller
>>>   	  which provides clocks for the above.
>>>   +config STM32_FIREWALL
>>> +	bool "STM32 Firewall framework"
>>> +	depends on ARCH_STM32
>>> +	default MACH_STM32MP157 || MACH_STM32MP13 || MACH_STM32MP25
>>> +	help
>>> +	  Say y to enable firewall framework and its services. Firewall
>>> +	  controllers will be able to register to the framework. Firewall
>>> +	  controllers must be initialized and register to the firewall framework
>>> +	  at arch_initcall level.
>>> +
>>>   config SUN50I_DE2_BUS
>>>   	bool "Allwinner A64 DE2 Bus Driver"
>>>   	  default ARM64
>>> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
>>> index d90eed189a65..fc0511450ec2 100644
>>> --- a/drivers/bus/Makefile
>>> +++ b/drivers/bus/Makefile
>>> @@ -26,6 +26,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
>>>   obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
>>>   obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
>>>   obj-$(CONFIG_QCOM_SSC_BLOCK_BUS)	+= qcom-ssc-block-bus.o
>>> +obj-$(CONFIG_STM32_FIREWALL)	+= stm32_firewall.o
>>>   obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
>>>   obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
>>>   obj-$(CONFIG_OF)		+= simple-pm-bus.o
>>> diff --git a/drivers/bus/stm32_firewall.c b/drivers/bus/stm32_firewall.c
>>> new file mode 100644
>>> index 000000000000..510db5bc6eaf
>>> --- /dev/null
>>> +++ b/drivers/bus/stm32_firewall.c
>>> @@ -0,0 +1,252 @@
>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>> +/*
>>> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
>>> + */
>>> +
>>> +#include <linux/bitfield.h>
>>> +#include <linux/bits.h>
>>> +#include <linux/bus/stm32_firewall_device.h>
>>> +#include <linux/device.h>
>>> +#include <linux/err.h>
>>> +#include <linux/init.h>
>>> +#include <linux/io.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_platform.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/types.h>
>>> +
>>> +#include "stm32_firewall.h"
>>> +
>>> +/* Corresponds to STM32_FIREWALL_MAX_EXTRA_ARGS + firewall controller reference + firewall ID */
>>> +#define STM32_FIREWALL_MAX_ARGS		(STM32_FIREWALL_MAX_EXTRA_ARGS + 2)
>>> +
>>> +static LIST_HEAD(firewall_controller_list);
>>> +static DEFINE_MUTEX(firewall_controller_list_lock);
>>> +
>>> +static int stm32_firewall_get_id(struct device_node *np, u32 *id)
>>> +{
>>> +	u32 feature_domain_cell[2];
>>> +
>>> +	/* Get property from device node */
>>> +	if (of_property_read_u32_array(np, "feature-domains",
>>> +				       feature_domain_cell,
>>> +				       ARRAY_SIZE(feature_domain_cell))) {
>>> +		pr_err("Unable to find get firewall ID property\n");
>>> +		return -ENODEV;
>>> +	}
>>> +
>>> +	*id = feature_domain_cell[1];
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +/* Firewall device API */
>>> +
>>> +int stm32_firewall_get_firewall(struct device_node *np,
>>> +				struct stm32_firewall *firewall)
>>> +{
>>> +	struct stm32_firewall_controller *ctrl;
>>> +	struct of_phandle_args args;
>>> +	u32 controller_phandle;
>>> +	bool match = false;
>>> +	size_t i;
>>> +	int err;
>>> +
>>> +	if (!firewall)
>>> +		return -EINVAL;
>>> +
>>> +	/* The controller phandle is always the first argument of the feature-domains property. */
>>> +	err = of_property_read_u32(np, "feature-domains", &controller_phandle);
>>> +	if (err) {
>>> +		pr_err("Unable to get feature-domains property for node %s\n", np->full_name);
>>> +		return err;
>>> +	}
>>> +
>>> +	/* Parse property with phandle parsed out */
>>> +	err = of_parse_phandle_with_args(np, "feature-domains", "#feature-domain-cells", 0, &args);
>>> +	if (err) {
>>> +		pr_err("Unable to read feature-domains arguments for node %s\n", np->full_name);
>>> +		return err;
>>> +	}
>>> +
>>> +	/* The phandle is parsed out */
>>> +	if (args.args_count > STM32_FIREWALL_MAX_ARGS - 1)
>>> +		return -EINVAL;
>>> +
>>> +	of_node_put(np);
>>> +
>>> +	/* Check if the parsed phandle corresponds to a registered firewall controller */
>>> +	mutex_lock(&firewall_controller_list_lock);
>>> +	list_for_each_entry(ctrl, &firewall_controller_list, entry) {
>>> +		if (ctrl->dev->of_node->phandle == controller_phandle) {
>>> +			match = true;
>>> +			firewall->firewall_ctrl = ctrl;
>>> +			break;
>>> +		}
>>> +	}
>>> +	mutex_unlock(&firewall_controller_list_lock);
>>> +	if (!match) {
>>> +		firewall->firewall_ctrl = NULL;
>>> +		pr_err("No firewall controller registered for %s\n", np->full_name);
>>> +		return -ENODEV;
>>> +	}
>>> +
>>> +	/*
>>> +	 * The firewall ID is always the second argument of the feature-domains property.
>>> +	 * The first argument is already parsed out, so args.args[0] is the second argument.
>>> +	 */
>>> +	firewall->firewall_id = args.args[0];
>>> +
>>> +	/* Extra args start at the third argument */
>>> +	for (i = 0; i < args.args_count; i++)
>>> +		firewall->extra_args[i] = args.args[i + 1];
>>> +
>>> +	/* Remove the firewall ID arg that is not an extra argument */
>>> +	if (args.args_count >= 1)
>>> +		firewall->extra_args_size = args.args_count - 1;
>> As I can see you support some extra args, that can be provided in
>> the
>> feature-domain property. But in the binding description I see maxItems:
>> 2. I beliewe this should be highlighted in bindings description.
>> 
>
> Good point, maybe it would be better to define a high maxItem value in
> the binding description that is aligned with STM32_FIREWALL_MAX_ARGS.
>
>>> +
>>> +	return 0;
>>> +}
>>> +EXPORT_SYMBOL_GPL(stm32_firewall_get_firewall);
>>> +
>>> +int stm32_firewall_grant_access(struct stm32_firewall *firewall)
>>> +{
>>> +	struct stm32_firewall_controller *firewall_controller;
>>> +
>>> +	if (!firewall || firewall->firewall_id == U32_MAX)
>>> +		return -EINVAL;
>>> +
>>> +	firewall_controller = firewall->firewall_ctrl;
>>> +
>>> +	if (!firewall_controller)
>>> +		return -ENODEV;
>>> +
>>> +	return firewall_controller->grant_access(firewall_controller, firewall->firewall_id);
>>> +}
>>> +EXPORT_SYMBOL_GPL(stm32_firewall_grant_access);
>>> +
>>> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>>> +{
>>> +	struct stm32_firewall_controller *firewall_controller;
>>> +
>>> +	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX)
>>> +		return -EINVAL;
>>> +
>>> +	firewall_controller = firewall->firewall_ctrl;
>>> +
>>> +	if (!firewall_controller)
>>> +		return -ENODEV;
>>> +
>>> +	return firewall_controller->grant_access(firewall_controller, subsystem_id);
>>> +}
>>> +EXPORT_SYMBOL_GPL(stm32_firewall_grant_access_by_id);
>>> +
>>> +void stm32_firewall_release_access(struct stm32_firewall *firewall)
>>> +{
>>> +	struct stm32_firewall_controller *firewall_controller;
>>> +
>>> +	if (!firewall || firewall->firewall_id == U32_MAX) {
>>> +		pr_err("Incorrect arguments when releasing a firewall access");
>>> +		return;
>>> +	}
>>> +
>>> +	firewall_controller = firewall->firewall_ctrl;
>>> +
>>> +	if (!firewall_controller) {
>>> +		pr_debug("No firewall controller to release");
>>> +		return;
>>> +	}
>>> +
>>> +	firewall_controller->release_access(firewall_controller, firewall->firewall_id);
>>> +}
>>> +EXPORT_SYMBOL_GPL(stm32_firewall_release_access);
>>> +
>>> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>>> +{
>>> +	struct stm32_firewall_controller *firewall_controller;
>>> +
>>> +	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX) {
>>> +		pr_err("Incorrect arguments when releasing a firewall access");
>>> +		return;
>>> +	}
>>> +
>>> +	firewall_controller = firewall->firewall_ctrl;
>>> +
>>> +	if (!firewall_controller) {
>>> +		pr_debug("No firewall controller to release");
>>> +		return;
>>> +	}
>>> +
>>> +	firewall_controller->release_access(firewall_controller, subsystem_id);
>>> +}
>>> +EXPORT_SYMBOL_GPL(stm32_firewall_release_access_by_id);
>>> +
>>> +/* Firewall controller API */
>>> +
>>> +int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller)
>>> +{
>>> +	pr_info("Registering firewall controller %s", dev_name(firewall_controller->dev));
>>> +
>>> +	if (!firewall_controller)
>>> +		return -ENODEV;
>>> +
>>> +	mutex_lock(&firewall_controller_list_lock);
>>> +	list_add_tail(&firewall_controller->entry, &firewall_controller_list);
>>> +	mutex_unlock(&firewall_controller_list_lock);
>>> +
>>> +	return 0;
>>> +
>>> +}
>>> +
>>> +void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller)
>>> +{
>>> +	struct stm32_firewall_controller *ctrl, *tmp;
>>> +	bool controller_removed = false;
>>> +
>>> +	if (!firewall_controller) {
>>> +		pr_debug("Null reference while unregistering firewall controller");
>>> +		return;
>>> +	}
>>> +
>>> +	mutex_lock(&firewall_controller_list_lock);
>>> +	list_for_each_entry_safe(ctrl, tmp, &firewall_controller_list, entry) {
>>> +		if (ctrl == firewall_controller) {
>>> +			controller_removed = true;
>>> +			list_del_init(&ctrl->entry);
>>> +			break;
>>> +		}
>>> +	}
>> IIUC list_for_each_entry_safe protects you from removing node during
>> loop. But all list operations are done under
>> firewall_controller_list_lock mutex. I beliewe there is no need for
>> _safe call under the mutex because removing node during loop is
>> impossible. I think it worth investigation if it's safe to use
>> list_for_each_entry_safe without lock.
>
> AFAICT, list_for_each_entry_safe() does not protect against concurrent
> accesses, so I'll keep the mutex lock.
>
> Deleting while iterating will cause trouble if not using the safe
> version. I think it is fine as it is.
>

Ok, in that case I whould rather drop _safe, because for your case it is
impossible to remove entry while iterating the list.
This will save a couple of CPU instructions.


>>> +	mutex_unlock(&firewall_controller_list_lock);
>>> +
>>> +	if (!controller_removed)
>>> +		pr_debug("There was no firewall controller named %s to unregister",
>>> +			 dev_name(firewall_controller->dev));
>>> +}
>>> +
>>> +void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller)
>>> +{
>>> +	struct device_node *child;
>>> +	struct device *parent;
>>> +	u32 firewall_id;
>>> +	int err;
>>> +
>>> +	parent = firewall_controller->dev;
>>> +
>>> +	dev_dbg(parent, "Populating %s system bus\n", dev_name(firewall_controller->dev));
>>> +
>>> +	for_each_available_child_of_node(dev_of_node(parent), child) {
>>> +		err = stm32_firewall_get_id(child, &firewall_id);
>>> +		if (err < 0 ||
>>> +		    firewall_controller->grant_access(firewall_controller, firewall_id)) {
>>> +			/*
>>> +			 * Peripheral access not allowed or not defined.
>>> +			 * Mark the node as populated so platform bus won't probe it
>>> +			 */
>>> +			of_node_set_flag(child, OF_POPULATED);
>>> +			dev_err(parent, "%s: Device driver will not be probed\n",
>>> +				child->full_name);
>>> +		}
>>> +	}
>>> +}
>>> diff --git a/drivers/bus/stm32_firewall.h b/drivers/bus/stm32_firewall.h
>>> new file mode 100644
>>> index 000000000000..8d92e8c1ab77
>>> --- /dev/null
>>> +++ b/drivers/bus/stm32_firewall.h
>>> @@ -0,0 +1,83 @@
>>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>>> +/*
>>> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
>>> + */
>>> +
>>> +#ifndef _STM32_FIREWALL_H
>>> +#define _STM32_FIREWALL_H
>>> +
>>> +#include <linux/kernel.h>
>>> +#include <linux/list.h>
>>> +#include <linux/of.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/types.h>
>>> +
>>> +/**
>>> + * STM32_PERIPHERAL_FIREWALL:		This type of firewall protects peripherals
>> Intendation
>> 
>>> + * STM32_MEMORY_FIREWALL:		This type of firewall protects memories/subsets of memory
>>> + *					zones
>>> + * STM32_RESOURCE_FIREWALL:		This type of firewall protects internal resources
>>> + * STM32_NOTYPE_FIREWALL:		Undefined firewall type
>>> + */
>>> +
>>> +#define STM32_PERIPHERAL_FIREWALL	BIT(1)
>> Intendation
>> 
>
> I'm sorry but I don't understand. I indent with tabs, maybe this is why
> it appears strange here. The indentation is fine, same for others below.
>

Nevermind, Just looks strange in patch.

>>> +#define STM32_MEMORY_FIREWALL		BIT(2)
>>> +#define STM32_RESOURCE_FIREWALL		BIT(3)
>>> +#define STM32_NOTYPE_FIREWALL		BIT(4)
>>> +
>>> +/**
>>> + * struct stm32_firewall_controller - Information on firewall controller supplying services
>>> + *
>>> + * @name			Name of the firewall controller
>>> + * @dev				Device reference of the firewall controller
>> Intendation
>> 
>>> + * @mmio			Base address of the firewall controller
>>> + * @entry			List entry of the firewall controller list
>>> + * @type			Type of firewall
>>> + * @max_entries			Number of entries covered by the firewall
>> Intendation
>> 
>>> + * @grant_access		Callback used to grant access for a device access against a
>>> + *				firewall controller
>>> + * @release_access		Callback used to release resources taken by a device when access was
>>> + *				granted
>>> + * @grant_memory_range_access	Callback used to grant access for a device to a given memory region
>>> + */
>>> +struct stm32_firewall_controller {
>>> +	const char *name;
>>> +	struct device *dev;
>>> +	void __iomem *mmio;
>>> +	struct list_head entry;
>>> +	unsigned int type;
>>> +	unsigned int max_entries;
>>> +
>>> +	int (*grant_access)(struct stm32_firewall_controller *ctrl, u32 id);
>>> +	void (*release_access)(struct stm32_firewall_controller *ctrl, u32 id);
>>> +	int (*grant_memory_range_access)(struct stm32_firewall_controller *ctrl, phys_addr_t paddr,
>>> +					 size_t size);
>>> +};
>>> +
>>> +/**
>>> + * int stm32_firewall_controller_register - Register a firewall controller to the STM32 firewall
>>> + *					    framework
>>> + * @firewall_controller		Firewall controller to register
>>> + *
>>> + * Returns 0 in case of success or -ENODEV if no controller was given.
>>> + */
>>> +int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller);
>>> +
>>> +/**
>>> + * int stm32_firewall_controller_unregister - Unregister a firewall controller from the STM32
>>> + *					      firewall framework
>>> + * @firewall_controller		Firewall controller to unregister
>>> + */
>>> +void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller);
>>> +
>>> +/**
>>> + * stm32_firewall_populate_bus - Populate device tree nodes that have a correct firewall
>>> + *				 configuration. This is used at boot-time only, as a sanity check
>>> + *				 between device tree and firewalls hardware configurations to
>>> + *				 prevent a kernel crash when a device driver is not granted access
>>> + *
>>> + * @firewall_controller		Firewall controller which nodes will be populated or not
>>> + */
>>> +void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller);
>>> +
>>> +#endif /* _STM32_FIREWALL_H */
>>> diff --git a/include/linux/bus/stm32_firewall_device.h b/include/linux/bus/stm32_firewall_device.h
>>> new file mode 100644
>>> index 000000000000..ccaecea7fc6c
>>> --- /dev/null
>>> +++ b/include/linux/bus/stm32_firewall_device.h
>>> @@ -0,0 +1,134 @@
>>> +/* SPDX-License-Identifier: GPL-2.0-or-later */
>>> +/*
>>> + * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
>>> + */
>>> +
>>> +#ifndef STM32_FIREWALL_DEVICE_H
>>> +#define STM32_FIREWALL_DEVICE_H
>>> +
>>> +#include <linux/of.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/types.h>
>>> +
>>> +#define STM32_FIREWALL_MAX_EXTRA_ARGS		5
>> It's not clear to me why it's 5. Comment above sais this is
>> implementation defined. Maybe this parameter can be configurable?
>> 
>
> Maybe it should be part of compat_data of firewall controllers :)
>
>>> +
>>> +/* Opaque reference to stm32_firewall_controller */
>>> +struct stm32_firewall_controller;
>>> +
>>> +/**
>>> + * stm32_firewall - Information on a device's firewall. Each device can have more than one firewall.
>>> + *
>>> + * @firewall_ctrl		Pointer referencing a firewall controller of the device. It is
>>> + *				opaque so a device cannot manipulate the controller's ops or access
>>> + *				the controller's data
>>> + * @extra_args			Extra arguments that are implementation dependent
>>> + * @extra_args_size		Number of extra arguments
>>> + * @firewall_id			Firewall ID associated the device for this firewall controller
>>> + */
>>> +struct stm32_firewall {
>>> +	struct stm32_firewall_controller *firewall_ctrl;
>>> +	u32 extra_args[STM32_FIREWALL_MAX_EXTRA_ARGS];
>>> +	size_t extra_args_size;
>>> +	u32 firewall_id;
>>> +};
>>> +
>>> +#if IS_ENABLED(CONFIG_STM32_FIREWALL)
>>> +/**
>>> + * stm32_firewall_get_firewall - Get the firewall(s) associated to given device.
>>> + *				 The firewall controller reference is always the first argument
>>> + *				 of the feature-domains property.
>>> + *				 The firewall ID is always the second argument of the
>>> + *				 feature-domains property.
>>> + *
>>> + * @np				Device node to parse
>> Intendation
>> 
>>> + * @firewall			Resulting firewall reference(s)
>>> + *
>>> + * Returns 0 on success, -ENODEV if there's no match with a firewall controller or appropriate errno
>>> + * code if error occurred.
>>> + */
>>> +int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall);
>>> +
>>> +/**
>>> + * stm32_firewall_grant_access - Request firewall access rights and grant access.
>>> + *
>>> + * @firewall			Firewall reference containing the ID to check against its firewall
>>> + *				controller
>>> + *
>>> + * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
>>> + * appropriate errno code if error occurred
>>> + */
>>> +int stm32_firewall_grant_access(struct stm32_firewall *firewall);
>>> +
>>> +/**
>>> + * stm32_firewall_release_access - Release access granted from a call to
>>> + *				   stm32_firewall_grant_access().
>>> + *
>>> + * @firewall			Firewall reference containing the ID to check against its firewall
>>> + *				controller
>>> + */
>>> +void stm32_firewall_release_access(struct stm32_firewall *firewall);
>>> +
>>> +/**
>>> + * stm32_firewall_grant_access_by_id - Request firewall access rights of a given device
>>> + *				       based on a specific firewall ID
>>> + *
>>> + * Warnings:
>>> + * There is no way to ensure that the given ID will correspond to the firewall referenced in the
>>> + * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
>>> + * function must be used with caution.
>>> + * This function should be used for subsystem resources that do not have the same firewall ID
>>> + * as their parent.
>>> + * U32_MAX is an invalid ID.
>>> + *
>>> + * @firewall			Firewall reference containing the firewall controller
>>> + * @subsystem_id		Firewall ID of the subsystem resource
>>> + *
>>> + * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
>>> + * appropriate errno code if error occurred
>>> + */
>>> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);
>> Can we store all registered IDs that were found by populate_bus
>> functio, or is it expected when this function was called before
>> populate_bus call?
>> 
>
> This function is intended to be used by devices that needs to check
> specific ID. Maybe IDs of peripherals that do not have a driver in
> Linux / driver isn't probed / ...
>
> About storing all IDs found when populating the bus, do you have some
> use in mind? :) Else I'd prefer to save some memory.
>
> Best regards,
> Gatien
>

Then I think it worth mentioning in Warnings comment. What bothered me
is that you've said that there is no way to check ID while I was seeing
possible implementation.


>>> +
>>> +/**
>>> + * stm32_firewall_release_access_by_id - Release access granted from a call to
>>> + *					 stm32_firewall_grant_access_by_id().
>>> + *
>>> + * Warnings:
>>> + * There is no way to ensure that the given ID will correspond to the firewall referenced in the
>>> + * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
>>> + * function must be used with caution.
>>> + * This function should be used for subsystem resources that do not have the same firewall ID
>>> + * as their parent.
>>> + * U32_MAX is an invalid ID.
>>> + *
>>> + * @firewall			Firewall reference containing the firewall controller
>>> + * @subsystem_id		Firewall ID of the subsystem resource
>>> + */
>>> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);
>>> +
>>> +#else /* CONFIG_STM32_FIREWALL */
>>> +
>>> +int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall)
>>> +{
>>> +	return -ENODEV;
>>> +}
>>> +
>>> +int stm32_firewall_grant_access(struct stm32_firewall *firewall)
>>> +{
>>> +	return -ENODEV;
>>> +}
>>> +
>>> +void stm32_firewall_release_access(struct stm32_firewall *firewall)
>>> +{
>>> +}
>>> +
>>> +int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>>> +{
>>> +	return -ENODEV;
>>> +}
>>> +
>>> +void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
>>> +{
>>> +}
>>> +
>>> +#endif /* CONFIG_STM32_FIREWALL */
>>> +#endif /* STM32_FIREWALL_DEVICE_H */
>>
Gatien CHEVALLIER July 13, 2023, 1:58 p.m. UTC | #11
Hello Rob,

On 7/7/23 17:07, Rob Herring wrote:
> On Fri, Jul 07, 2023 at 03:43:15PM +0200, Gatien CHEVALLIER wrote:
>>
>>
>> On 7/6/23 17:09, Rob Herring wrote:
>>> On Wed, Jul 05, 2023 at 07:27:54PM +0200, Gatien Chevallier wrote:
>>>> Introduce a firewall framework that offers to firewall consumers different
>>>> firewall services such as the ability to check their access rights against
>>>> their firewall controller(s).
>>>>
>>>> The firewall framework offers a generic API that is defined in firewall
>>>> controllers drivers to best fit the specificity of each firewall.
>>>>
>>>> There are various types of firewalls:
>>>> -Peripheral firewalls that filter accesses to peripherals
>>>> -Memory firewalls that filter accesses to memories or memory regions
>>>> -Resource firewalls that filter accesses to internal resources such as
>>>> reset and clock controllers
>>>
>>> How do resource firewalls work? Access to registers for some clocks in a
>>> clock controller are disabled? Or something gates off clocks/resets to
>>> a block?
>>
>> To take a practical example:
>>
>> A clock controller can be firewall-aware and have its own firewall registers
>> to configure. To access a clock/reset that is handled this way, a device
>> would need to check this "resource firewall". I thought that for these kinds
>> of hardware blocks, having a common API would help.
> 
> We already have the concept of 'protected clocks' which are ones
> controlled by secure mode which limits what Linux can do with them. I
> think you should extend this mechanism if needed and use the existing
> clock/reset APIs for managing resources.
> 

Ok, thank you for the input. I'll remove this type of firewall for V2 as
I no longer have a use case.

>>>
>>> It might make more sense for "resource" accesses to be managed within
>>> those resource APIs (i.e. the clock and reset frameworks) and leave this
>>> framework to bus accesses.
>>>
>>
>> Okay, I'll drop this for V2 if you find that the above explaination do not
>> justify this.
>>
>>>> A firewall controller must be probed at arch_initcall level and register
>>>> to the framework so that consumers can use their services.
>>>
>>> initcall ordering hacks should not be needed. We have both deferred
>>> probe and fw_devlinks to avoid that problem.
>>>
>>
>> Greg also doubts this.
>>
>> Drivers like reset/clock controllers drivers (core_initcall level) will have
>> a dependency on the firewall controllers in order to initialize their
>> resources. I was not sure how to manage these dependencies.
>>
>> Now, looking at init/main.c, I've realized that core_initcall() level comes
>> before arch_initcall() level...
>>
>> If managed by fw_devlink, the feature-domains property should be supported
>> as well I suppose? I'm not sure how to handle this properly. I'd welcome
>> your suggestion.
> 
> DT parent/child child dependencies are already handled which might be
> enough for you. Otherwise, adding a new provider/consumer binding is a
> couple of lines to add the property names. See drivers/of/property.c.
> 

Ok, I'll try with a modification of drivers/of/property.c as the
parent/child dependency won't be enough. Thanks for pointing this out.

>>>> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
>>>> ---
>>>>    MAINTAINERS                               |   5 +
>>>>    arch/arm64/Kconfig.platforms              |   1 +
>>>>    drivers/bus/Kconfig                       |  10 +
>>>>    drivers/bus/Makefile                      |   1 +
>>>>    drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
>>>>    drivers/bus/stm32_firewall.h              |  83 +++++++
>>>
>>> Why something stm32 specific? We know there are multiple platforms
>>> wanting something in this area. Wasn't the last attempt common?
>>>
>>> For a common binding, I'm not eager to accept anything new with only 1
>>> user.
>>>
>>
>> Last attempt was common for the feature-domain bindings. The system-bus
>> driver was ST-specific. I don't know if other platforms needs this kind
>> of framework. Are you suggesting that this framework should be generic? Or
>> that this framework should have a st-specific property?
> 
> Ah right, the posting for SCMI device permissions was the binding only.
> The binding should be generic and support more than 1 user. That somewhat
> implies a generic framework, but not necessarily.
> 
>> I've oriented this firewall framework to serve ST purpose. There may be a
>> need for other platforms but I'm not sure that this framework serves them
>> well. One can argue that it is quite minimalist and covers basic purposes of
>> a hardware firewall but I would need more feedback from other vendors to
>> submit it as a generic one.
> 
> We already know there are at least 2 users. Why would we make the 2nd
> user refactor your driver into a common framework?
> 
> [...]
> 

If one thinks this framework is generic enough so it can be of use for
them, so yes, I can submit it as a common framework. I'm not that sure
Oleksii finds a use case with it. He seemed interested by the bindings.
Maybe I'm wrong Oleksii?

For V2, I'd rather submit it again as an ST-specific framework again to
address the generic comments. This way, other people have time to
manifest themselves.

>>>> +int stm32_firewall_get_firewall(struct device_node *np,
>>>> +				struct stm32_firewall *firewall)
>>>> +{
>>>> +	struct stm32_firewall_controller *ctrl;
>>>> +	struct of_phandle_args args;
>>>> +	u32 controller_phandle;
>>>> +	bool match = false;
>>>> +	size_t i;
>>>> +	int err;
>>>> +
>>>> +	if (!firewall)
>>>> +		return -EINVAL;
>>>> +
>>>> +	/* The controller phandle is always the first argument of the feature-domains property. */
>>>> +	err = of_property_read_u32(np, "feature-domains", &controller_phandle);
>>>
>>> Why do you need to parse the property twice?
>>>
>>
>> The first parsing is to have the first argument, which is the controller
>> phandle. The second parsing is here to get the firewall arguments based on
>> the number of arguments defined by #feature-domain-cells. Maybe using
>> of_property_read_u32_array() would be better.
> 
> No. It's not a u32 array. It's a phandle+args property, so you should
> only use phandle+args APIs.
> 
>> I did not want to close the
>> door for supporting several feature domain controllers, hence multiple
>> phandles. of_parse_phandle_with_args() seemed fine for this purpose but the
>> phandle is parsed out.
> 
> There's an iterator for handling multiple phandle+args cases.
> 
> Rob

Ok, will look into that for V2.

Best regards,
Gatien
Oleksii Moisieiev July 13, 2023, 2:13 p.m. UTC | #12
Hello Gatien,

Gatien CHEVALLIER <gatien.chevallier@foss.st.com> writes:

> Hello Rob,
>
> On 7/7/23 17:07, Rob Herring wrote:
>> On Fri, Jul 07, 2023 at 03:43:15PM +0200, Gatien CHEVALLIER wrote:
>>>
>>>
>>> On 7/6/23 17:09, Rob Herring wrote:
>>>> On Wed, Jul 05, 2023 at 07:27:54PM +0200, Gatien Chevallier wrote:
>>>>> Introduce a firewall framework that offers to firewall consumers different
>>>>> firewall services such as the ability to check their access rights against
>>>>> their firewall controller(s).
>>>>>
>>>>> The firewall framework offers a generic API that is defined in firewall
>>>>> controllers drivers to best fit the specificity of each firewall.
>>>>>
>>>>> There are various types of firewalls:
>>>>> -Peripheral firewalls that filter accesses to peripherals
>>>>> -Memory firewalls that filter accesses to memories or memory regions
>>>>> -Resource firewalls that filter accesses to internal resources such as
>>>>> reset and clock controllers
>>>>
>>>> How do resource firewalls work? Access to registers for some clocks in a
>>>> clock controller are disabled? Or something gates off clocks/resets to
>>>> a block?
>>>
>>> To take a practical example:
>>>
>>> A clock controller can be firewall-aware and have its own firewall registers
>>> to configure. To access a clock/reset that is handled this way, a device
>>> would need to check this "resource firewall". I thought that for these kinds
>>> of hardware blocks, having a common API would help.
>> We already have the concept of 'protected clocks' which are ones
>> controlled by secure mode which limits what Linux can do with them. I
>> think you should extend this mechanism if needed and use the existing
>> clock/reset APIs for managing resources.
>> 
>
> Ok, thank you for the input. I'll remove this type of firewall for V2 as
> I no longer have a use case.
>
>>>>
>>>> It might make more sense for "resource" accesses to be managed within
>>>> those resource APIs (i.e. the clock and reset frameworks) and leave this
>>>> framework to bus accesses.
>>>>
>>>
>>> Okay, I'll drop this for V2 if you find that the above explaination do not
>>> justify this.
>>>
>>>>> A firewall controller must be probed at arch_initcall level and register
>>>>> to the framework so that consumers can use their services.
>>>>
>>>> initcall ordering hacks should not be needed. We have both deferred
>>>> probe and fw_devlinks to avoid that problem.
>>>>
>>>
>>> Greg also doubts this.
>>>
>>> Drivers like reset/clock controllers drivers (core_initcall level) will have
>>> a dependency on the firewall controllers in order to initialize their
>>> resources. I was not sure how to manage these dependencies.
>>>
>>> Now, looking at init/main.c, I've realized that core_initcall() level comes
>>> before arch_initcall() level...
>>>
>>> If managed by fw_devlink, the feature-domains property should be supported
>>> as well I suppose? I'm not sure how to handle this properly. I'd welcome
>>> your suggestion.
>> DT parent/child child dependencies are already handled which might
>> be
>> enough for you. Otherwise, adding a new provider/consumer binding is a
>> couple of lines to add the property names. See drivers/of/property.c.
>> 
>
> Ok, I'll try with a modification of drivers/of/property.c as the
> parent/child dependency won't be enough. Thanks for pointing this out.
>
>>>>> Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
>>>>> ---
>>>>>    MAINTAINERS                               |   5 +
>>>>>    arch/arm64/Kconfig.platforms              |   1 +
>>>>>    drivers/bus/Kconfig                       |  10 +
>>>>>    drivers/bus/Makefile                      |   1 +
>>>>>    drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
>>>>>    drivers/bus/stm32_firewall.h              |  83 +++++++
>>>>
>>>> Why something stm32 specific? We know there are multiple platforms
>>>> wanting something in this area. Wasn't the last attempt common?
>>>>
>>>> For a common binding, I'm not eager to accept anything new with only 1
>>>> user.
>>>>
>>>
>>> Last attempt was common for the feature-domain bindings. The system-bus
>>> driver was ST-specific. I don't know if other platforms needs this kind
>>> of framework. Are you suggesting that this framework should be generic? Or
>>> that this framework should have a st-specific property?
>> Ah right, the posting for SCMI device permissions was the binding
>> only.
>> The binding should be generic and support more than 1 user. That somewhat
>> implies a generic framework, but not necessarily.
>> 
>>> I've oriented this firewall framework to serve ST purpose. There may be a
>>> need for other platforms but I'm not sure that this framework serves them
>>> well. One can argue that it is quite minimalist and covers basic purposes of
>>> a hardware firewall but I would need more feedback from other vendors to
>>> submit it as a generic one.
>> We already know there are at least 2 users. Why would we make the
>> 2nd
>> user refactor your driver into a common framework?
>> [...]
>> 
>
> If one thinks this framework is generic enough so it can be of use for
> them, so yes, I can submit it as a common framework. I'm not that sure
> Oleksii finds a use case with it. He seemed interested by the bindings.
> Maybe I'm wrong Oleksii?
>

Correct. I'm interested only in bindings which should be processed by
the hypervisor and removed from the OS DT the Kernel running in VM wouldn't
know it exists.

> For V2, I'd rather submit it again as an ST-specific framework again to
> address the generic comments. This way, other people have time to
> manifest themselves.
>
>>>>> +int stm32_firewall_get_firewall(struct device_node *np,

[snip]

>
> Best regards,
> Gatien
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 41385f01fa98..fabf95ba9b86 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20123,6 +20123,11 @@  T:	git git://linuxtv.org/media_tree.git
 F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
 F:	drivers/media/i2c/st-mipid02.c
 
+ST STM32 FIREWALL
+M:	Gatien Chevallier <gatien.chevallier@foss.st.com>
+S:	Maintained
+F:	drivers/bus/stm32_firewall.c
+
 ST STM32 I2C/SMBUS DRIVER
 M:	Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
 M:	Alain Volmat <alain.volmat@foss.st.com>
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6069120199bb..5a46e90f1e4e 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -293,6 +293,7 @@  config ARCH_STM32
 	select ARM_SMC_MBOX
 	select ARM_SCMI_PROTOCOL
 	select COMMON_CLK_SCMI
+	select STM32_FIREWALL
 	help
 	  This enables support for ARMv8 based STMicroelectronics
 	  STM32 family, including:
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index fcfa280df98a..4d54a7ea52b2 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -163,6 +163,16 @@  config QCOM_SSC_BLOCK_BUS
 	  i2c/spi/uart controllers, a hexagon core, and a clock controller
 	  which provides clocks for the above.
 
+config STM32_FIREWALL
+	bool "STM32 Firewall framework"
+	depends on ARCH_STM32
+	default MACH_STM32MP157 || MACH_STM32MP13 || MACH_STM32MP25
+	help
+	  Say y to enable firewall framework and its services. Firewall
+	  controllers will be able to register to the framework. Firewall
+	  controllers must be initialized and register to the firewall framework
+	  at arch_initcall level.
+
 config SUN50I_DE2_BUS
 	bool "Allwinner A64 DE2 Bus Driver"
 	  default ARM64
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index d90eed189a65..fc0511450ec2 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -26,6 +26,7 @@  obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
 obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
 obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
 obj-$(CONFIG_QCOM_SSC_BLOCK_BUS)	+= qcom-ssc-block-bus.o
+obj-$(CONFIG_STM32_FIREWALL)	+= stm32_firewall.o
 obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
 obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
 obj-$(CONFIG_OF)		+= simple-pm-bus.o
diff --git a/drivers/bus/stm32_firewall.c b/drivers/bus/stm32_firewall.c
new file mode 100644
index 000000000000..510db5bc6eaf
--- /dev/null
+++ b/drivers/bus/stm32_firewall.c
@@ -0,0 +1,252 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/bus/stm32_firewall_device.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include "stm32_firewall.h"
+
+/* Corresponds to STM32_FIREWALL_MAX_EXTRA_ARGS + firewall controller reference + firewall ID */
+#define STM32_FIREWALL_MAX_ARGS		(STM32_FIREWALL_MAX_EXTRA_ARGS + 2)
+
+static LIST_HEAD(firewall_controller_list);
+static DEFINE_MUTEX(firewall_controller_list_lock);
+
+static int stm32_firewall_get_id(struct device_node *np, u32 *id)
+{
+	u32 feature_domain_cell[2];
+
+	/* Get property from device node */
+	if (of_property_read_u32_array(np, "feature-domains",
+				       feature_domain_cell,
+				       ARRAY_SIZE(feature_domain_cell))) {
+		pr_err("Unable to find get firewall ID property\n");
+		return -ENODEV;
+	}
+
+	*id = feature_domain_cell[1];
+
+	return 0;
+}
+
+/* Firewall device API */
+
+int stm32_firewall_get_firewall(struct device_node *np,
+				struct stm32_firewall *firewall)
+{
+	struct stm32_firewall_controller *ctrl;
+	struct of_phandle_args args;
+	u32 controller_phandle;
+	bool match = false;
+	size_t i;
+	int err;
+
+	if (!firewall)
+		return -EINVAL;
+
+	/* The controller phandle is always the first argument of the feature-domains property. */
+	err = of_property_read_u32(np, "feature-domains", &controller_phandle);
+	if (err) {
+		pr_err("Unable to get feature-domains property for node %s\n", np->full_name);
+		return err;
+	}
+
+	/* Parse property with phandle parsed out */
+	err = of_parse_phandle_with_args(np, "feature-domains", "#feature-domain-cells", 0, &args);
+	if (err) {
+		pr_err("Unable to read feature-domains arguments for node %s\n", np->full_name);
+		return err;
+	}
+
+	/* The phandle is parsed out */
+	if (args.args_count > STM32_FIREWALL_MAX_ARGS - 1)
+		return -EINVAL;
+
+	of_node_put(np);
+
+	/* Check if the parsed phandle corresponds to a registered firewall controller */
+	mutex_lock(&firewall_controller_list_lock);
+	list_for_each_entry(ctrl, &firewall_controller_list, entry) {
+		if (ctrl->dev->of_node->phandle == controller_phandle) {
+			match = true;
+			firewall->firewall_ctrl = ctrl;
+			break;
+		}
+	}
+	mutex_unlock(&firewall_controller_list_lock);
+	if (!match) {
+		firewall->firewall_ctrl = NULL;
+		pr_err("No firewall controller registered for %s\n", np->full_name);
+		return -ENODEV;
+	}
+
+	/*
+	 * The firewall ID is always the second argument of the feature-domains property.
+	 * The first argument is already parsed out, so args.args[0] is the second argument.
+	 */
+	firewall->firewall_id = args.args[0];
+
+	/* Extra args start at the third argument */
+	for (i = 0; i < args.args_count; i++)
+		firewall->extra_args[i] = args.args[i + 1];
+
+	/* Remove the firewall ID arg that is not an extra argument */
+	if (args.args_count >= 1)
+		firewall->extra_args_size = args.args_count - 1;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stm32_firewall_get_firewall);
+
+int stm32_firewall_grant_access(struct stm32_firewall *firewall)
+{
+	struct stm32_firewall_controller *firewall_controller;
+
+	if (!firewall || firewall->firewall_id == U32_MAX)
+		return -EINVAL;
+
+	firewall_controller = firewall->firewall_ctrl;
+
+	if (!firewall_controller)
+		return -ENODEV;
+
+	return firewall_controller->grant_access(firewall_controller, firewall->firewall_id);
+}
+EXPORT_SYMBOL_GPL(stm32_firewall_grant_access);
+
+int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
+{
+	struct stm32_firewall_controller *firewall_controller;
+
+	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX)
+		return -EINVAL;
+
+	firewall_controller = firewall->firewall_ctrl;
+
+	if (!firewall_controller)
+		return -ENODEV;
+
+	return firewall_controller->grant_access(firewall_controller, subsystem_id);
+}
+EXPORT_SYMBOL_GPL(stm32_firewall_grant_access_by_id);
+
+void stm32_firewall_release_access(struct stm32_firewall *firewall)
+{
+	struct stm32_firewall_controller *firewall_controller;
+
+	if (!firewall || firewall->firewall_id == U32_MAX) {
+		pr_err("Incorrect arguments when releasing a firewall access");
+		return;
+	}
+
+	firewall_controller = firewall->firewall_ctrl;
+
+	if (!firewall_controller) {
+		pr_debug("No firewall controller to release");
+		return;
+	}
+
+	firewall_controller->release_access(firewall_controller, firewall->firewall_id);
+}
+EXPORT_SYMBOL_GPL(stm32_firewall_release_access);
+
+void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
+{
+	struct stm32_firewall_controller *firewall_controller;
+
+	if (!firewall || subsystem_id == U32_MAX || firewall->firewall_id == U32_MAX) {
+		pr_err("Incorrect arguments when releasing a firewall access");
+		return;
+	}
+
+	firewall_controller = firewall->firewall_ctrl;
+
+	if (!firewall_controller) {
+		pr_debug("No firewall controller to release");
+		return;
+	}
+
+	firewall_controller->release_access(firewall_controller, subsystem_id);
+}
+EXPORT_SYMBOL_GPL(stm32_firewall_release_access_by_id);
+
+/* Firewall controller API */
+
+int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller)
+{
+	pr_info("Registering firewall controller %s", dev_name(firewall_controller->dev));
+
+	if (!firewall_controller)
+		return -ENODEV;
+
+	mutex_lock(&firewall_controller_list_lock);
+	list_add_tail(&firewall_controller->entry, &firewall_controller_list);
+	mutex_unlock(&firewall_controller_list_lock);
+
+	return 0;
+
+}
+
+void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller)
+{
+	struct stm32_firewall_controller *ctrl, *tmp;
+	bool controller_removed = false;
+
+	if (!firewall_controller) {
+		pr_debug("Null reference while unregistering firewall controller");
+		return;
+	}
+
+	mutex_lock(&firewall_controller_list_lock);
+	list_for_each_entry_safe(ctrl, tmp, &firewall_controller_list, entry) {
+		if (ctrl == firewall_controller) {
+			controller_removed = true;
+			list_del_init(&ctrl->entry);
+			break;
+		}
+	}
+	mutex_unlock(&firewall_controller_list_lock);
+
+	if (!controller_removed)
+		pr_debug("There was no firewall controller named %s to unregister",
+			 dev_name(firewall_controller->dev));
+}
+
+void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller)
+{
+	struct device_node *child;
+	struct device *parent;
+	u32 firewall_id;
+	int err;
+
+	parent = firewall_controller->dev;
+
+	dev_dbg(parent, "Populating %s system bus\n", dev_name(firewall_controller->dev));
+
+	for_each_available_child_of_node(dev_of_node(parent), child) {
+		err = stm32_firewall_get_id(child, &firewall_id);
+		if (err < 0 ||
+		    firewall_controller->grant_access(firewall_controller, firewall_id)) {
+			/*
+			 * Peripheral access not allowed or not defined.
+			 * Mark the node as populated so platform bus won't probe it
+			 */
+			of_node_set_flag(child, OF_POPULATED);
+			dev_err(parent, "%s: Device driver will not be probed\n",
+				child->full_name);
+		}
+	}
+}
diff --git a/drivers/bus/stm32_firewall.h b/drivers/bus/stm32_firewall.h
new file mode 100644
index 000000000000..8d92e8c1ab77
--- /dev/null
+++ b/drivers/bus/stm32_firewall.h
@@ -0,0 +1,83 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef _STM32_FIREWALL_H
+#define _STM32_FIREWALL_H
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+/**
+ * STM32_PERIPHERAL_FIREWALL:		This type of firewall protects peripherals
+ * STM32_MEMORY_FIREWALL:		This type of firewall protects memories/subsets of memory
+ *					zones
+ * STM32_RESOURCE_FIREWALL:		This type of firewall protects internal resources
+ * STM32_NOTYPE_FIREWALL:		Undefined firewall type
+ */
+
+#define STM32_PERIPHERAL_FIREWALL	BIT(1)
+#define STM32_MEMORY_FIREWALL		BIT(2)
+#define STM32_RESOURCE_FIREWALL		BIT(3)
+#define STM32_NOTYPE_FIREWALL		BIT(4)
+
+/**
+ * struct stm32_firewall_controller - Information on firewall controller supplying services
+ *
+ * @name			Name of the firewall controller
+ * @dev				Device reference of the firewall controller
+ * @mmio			Base address of the firewall controller
+ * @entry			List entry of the firewall controller list
+ * @type			Type of firewall
+ * @max_entries			Number of entries covered by the firewall
+ * @grant_access		Callback used to grant access for a device access against a
+ *				firewall controller
+ * @release_access		Callback used to release resources taken by a device when access was
+ *				granted
+ * @grant_memory_range_access	Callback used to grant access for a device to a given memory region
+ */
+struct stm32_firewall_controller {
+	const char *name;
+	struct device *dev;
+	void __iomem *mmio;
+	struct list_head entry;
+	unsigned int type;
+	unsigned int max_entries;
+
+	int (*grant_access)(struct stm32_firewall_controller *ctrl, u32 id);
+	void (*release_access)(struct stm32_firewall_controller *ctrl, u32 id);
+	int (*grant_memory_range_access)(struct stm32_firewall_controller *ctrl, phys_addr_t paddr,
+					 size_t size);
+};
+
+/**
+ * int stm32_firewall_controller_register - Register a firewall controller to the STM32 firewall
+ *					    framework
+ * @firewall_controller		Firewall controller to register
+ *
+ * Returns 0 in case of success or -ENODEV if no controller was given.
+ */
+int stm32_firewall_controller_register(struct stm32_firewall_controller *firewall_controller);
+
+/**
+ * int stm32_firewall_controller_unregister - Unregister a firewall controller from the STM32
+ *					      firewall framework
+ * @firewall_controller		Firewall controller to unregister
+ */
+void stm32_firewall_controller_unregister(struct stm32_firewall_controller *firewall_controller);
+
+/**
+ * stm32_firewall_populate_bus - Populate device tree nodes that have a correct firewall
+ *				 configuration. This is used at boot-time only, as a sanity check
+ *				 between device tree and firewalls hardware configurations to
+ *				 prevent a kernel crash when a device driver is not granted access
+ *
+ * @firewall_controller		Firewall controller which nodes will be populated or not
+ */
+void stm32_firewall_populate_bus(struct stm32_firewall_controller *firewall_controller);
+
+#endif /* _STM32_FIREWALL_H */
diff --git a/include/linux/bus/stm32_firewall_device.h b/include/linux/bus/stm32_firewall_device.h
new file mode 100644
index 000000000000..ccaecea7fc6c
--- /dev/null
+++ b/include/linux/bus/stm32_firewall_device.h
@@ -0,0 +1,134 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2023, STMicroelectronics - All Rights Reserved
+ */
+
+#ifndef STM32_FIREWALL_DEVICE_H
+#define STM32_FIREWALL_DEVICE_H
+
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#define STM32_FIREWALL_MAX_EXTRA_ARGS		5
+
+/* Opaque reference to stm32_firewall_controller */
+struct stm32_firewall_controller;
+
+/**
+ * stm32_firewall - Information on a device's firewall. Each device can have more than one firewall.
+ *
+ * @firewall_ctrl		Pointer referencing a firewall controller of the device. It is
+ *				opaque so a device cannot manipulate the controller's ops or access
+ *				the controller's data
+ * @extra_args			Extra arguments that are implementation dependent
+ * @extra_args_size		Number of extra arguments
+ * @firewall_id			Firewall ID associated the device for this firewall controller
+ */
+struct stm32_firewall {
+	struct stm32_firewall_controller *firewall_ctrl;
+	u32 extra_args[STM32_FIREWALL_MAX_EXTRA_ARGS];
+	size_t extra_args_size;
+	u32 firewall_id;
+};
+
+#if IS_ENABLED(CONFIG_STM32_FIREWALL)
+/**
+ * stm32_firewall_get_firewall - Get the firewall(s) associated to given device.
+ *				 The firewall controller reference is always the first argument
+ *				 of the feature-domains property.
+ *				 The firewall ID is always the second argument of the
+ *				 feature-domains property.
+ *
+ * @np				Device node to parse
+ * @firewall			Resulting firewall reference(s)
+ *
+ * Returns 0 on success, -ENODEV if there's no match with a firewall controller or appropriate errno
+ * code if error occurred.
+ */
+int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall);
+
+/**
+ * stm32_firewall_grant_access - Request firewall access rights and grant access.
+ *
+ * @firewall			Firewall reference containing the ID to check against its firewall
+ *				controller
+ *
+ * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
+ * appropriate errno code if error occurred
+ */
+int stm32_firewall_grant_access(struct stm32_firewall *firewall);
+
+/**
+ * stm32_firewall_release_access - Release access granted from a call to
+ *				   stm32_firewall_grant_access().
+ *
+ * @firewall			Firewall reference containing the ID to check against its firewall
+ *				controller
+ */
+void stm32_firewall_release_access(struct stm32_firewall *firewall);
+
+/**
+ * stm32_firewall_grant_access_by_id - Request firewall access rights of a given device
+ *				       based on a specific firewall ID
+ *
+ * Warnings:
+ * There is no way to ensure that the given ID will correspond to the firewall referenced in the
+ * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
+ * function must be used with caution.
+ * This function should be used for subsystem resources that do not have the same firewall ID
+ * as their parent.
+ * U32_MAX is an invalid ID.
+ *
+ * @firewall			Firewall reference containing the firewall controller
+ * @subsystem_id		Firewall ID of the subsystem resource
+ *
+ * Returns 0 if access is granted, -EACCES if access is denied, -ENODEV if firewall is null or
+ * appropriate errno code if error occurred
+ */
+int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);
+
+/**
+ * stm32_firewall_release_access_by_id - Release access granted from a call to
+ *					 stm32_firewall_grant_access_by_id().
+ *
+ * Warnings:
+ * There is no way to ensure that the given ID will correspond to the firewall referenced in the
+ * device node if the ID did not come from stm32_firewall_get_firewall(). In that case, this
+ * function must be used with caution.
+ * This function should be used for subsystem resources that do not have the same firewall ID
+ * as their parent.
+ * U32_MAX is an invalid ID.
+ *
+ * @firewall			Firewall reference containing the firewall controller
+ * @subsystem_id		Firewall ID of the subsystem resource
+ */
+void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id);
+
+#else /* CONFIG_STM32_FIREWALL */
+
+int stm32_firewall_get_firewall(struct device_node *np, struct stm32_firewall *firewall)
+{
+	return -ENODEV;
+}
+
+int stm32_firewall_grant_access(struct stm32_firewall *firewall)
+{
+	return -ENODEV;
+}
+
+void stm32_firewall_release_access(struct stm32_firewall *firewall)
+{
+}
+
+int stm32_firewall_grant_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
+{
+	return -ENODEV;
+}
+
+void stm32_firewall_release_access_by_id(struct stm32_firewall *firewall, u32 subsystem_id)
+{
+}
+
+#endif /* CONFIG_STM32_FIREWALL */
+#endif /* STM32_FIREWALL_DEVICE_H */