diff mbox series

[v2,1/3] arch/x86: Move UAPI setup structures into setup_data.h

Message ID 20231215122614.5481-2-tzimmermann@suse.de
State New
Headers show
Series arch/x86: Remove unnecessary dependencies on bootparam.h | expand

Commit Message

Thomas Zimmermann Dec. 15, 2023, 12:18 p.m. UTC
The type definition of struct pci_setup_rom in <asm/pci.h> requires
struct setup_data from <asm/bootparam.h>. Many drivers include
<linux/pci.h>, but do not use boot parameters. Changes to bootparam.h
or its included header files could easily trigger a large, unnecessary
rebuild of the kernel.

Moving struct setup_data and related code into its own own header file
avoids including <asm/bootparam.h> in <asm/pci.h>. Instead include the
new header <asm/screen_data.h> and remove the include statement for
x86_init.h, which is unnecessary but pulls in bootparams.h.

Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
---
 arch/x86/include/asm/pci.h             |   2 +-
 arch/x86/include/uapi/asm/bootparam.h  | 218 +----------------------
 arch/x86/include/uapi/asm/setup_data.h | 229 +++++++++++++++++++++++++
 3 files changed, 231 insertions(+), 218 deletions(-)
 create mode 100644 arch/x86/include/uapi/asm/setup_data.h

Comments

Ard Biesheuvel Dec. 19, 2023, 10:50 a.m. UTC | #1
Hi Thomas,

On Fri, 15 Dec 2023 at 13:26, Thomas Zimmermann <tzimmermann@suse.de> wrote:
>
> The type definition of struct pci_setup_rom in <asm/pci.h> requires
> struct setup_data from <asm/bootparam.h>. Many drivers include
> <linux/pci.h>, but do not use boot parameters. Changes to bootparam.h
> or its included header files could easily trigger a large, unnecessary
> rebuild of the kernel.
>
> Moving struct setup_data and related code into its own own header file
> avoids including <asm/bootparam.h> in <asm/pci.h>. Instead include the
> new header <asm/screen_data.h> and remove the include statement for
> x86_init.h, which is unnecessary but pulls in bootparams.h.
>
> Suggested-by: Ard Biesheuvel <ardb@kernel.org>
> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
> ---
>  arch/x86/include/asm/pci.h             |   2 +-
>  arch/x86/include/uapi/asm/bootparam.h  | 218 +----------------------
>  arch/x86/include/uapi/asm/setup_data.h | 229 +++++++++++++++++++++++++
>  3 files changed, 231 insertions(+), 218 deletions(-)
>  create mode 100644 arch/x86/include/uapi/asm/setup_data.h
>

This is an improvement but not quite what I had in mind: setup_data is
a x86 specific linked list that is only referred to via a u64 in
setup_header.

So setup_data and all the specializations belong in setup_data.h.
OTOH, setup_header, the XLF load flags, efi_info, the e820 related
definitions etc are not related to setup_data at all but to
setup_header. Whether or not setup_header could live in its own header
too (along with those related definitions) is a separate question imo,
but I don't think they belong in setup_data.h



> diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
> index b40c462b4af3..f6100df3652e 100644
> --- a/arch/x86/include/asm/pci.h
> +++ b/arch/x86/include/asm/pci.h
> @@ -10,7 +10,7 @@
>  #include <linux/numa.h>
>  #include <asm/io.h>
>  #include <asm/memtype.h>
> -#include <asm/x86_init.h>
> +#include <asm/setup_data.h>
>
>  struct pci_sysdata {
>         int             domain;         /* PCI domain */
> diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h
> index 01d19fc22346..f6361eb792fd 100644
> --- a/arch/x86/include/uapi/asm/bootparam.h
> +++ b/arch/x86/include/uapi/asm/bootparam.h
> @@ -2,42 +2,7 @@
>  #ifndef _ASM_X86_BOOTPARAM_H
>  #define _ASM_X86_BOOTPARAM_H
>
> -/* setup_data/setup_indirect types */
> -#define SETUP_NONE                     0
> -#define SETUP_E820_EXT                 1
> -#define SETUP_DTB                      2
> -#define SETUP_PCI                      3
> -#define SETUP_EFI                      4
> -#define SETUP_APPLE_PROPERTIES         5
> -#define SETUP_JAILHOUSE                        6
> -#define SETUP_CC_BLOB                  7
> -#define SETUP_IMA                      8
> -#define SETUP_RNG_SEED                 9
> -#define SETUP_ENUM_MAX                 SETUP_RNG_SEED
> -
> -#define SETUP_INDIRECT                 (1<<31)
> -#define SETUP_TYPE_MAX                 (SETUP_ENUM_MAX | SETUP_INDIRECT)
> -
> -/* ram_size flags */
> -#define RAMDISK_IMAGE_START_MASK       0x07FF
> -#define RAMDISK_PROMPT_FLAG            0x8000
> -#define RAMDISK_LOAD_FLAG              0x4000
> -
> -/* loadflags */
> -#define LOADED_HIGH    (1<<0)
> -#define KASLR_FLAG     (1<<1)
> -#define QUIET_FLAG     (1<<5)
> -#define KEEP_SEGMENTS  (1<<6)
> -#define CAN_USE_HEAP   (1<<7)
> -
> -/* xloadflags */
> -#define XLF_KERNEL_64                  (1<<0)
> -#define XLF_CAN_BE_LOADED_ABOVE_4G     (1<<1)
> -#define XLF_EFI_HANDOVER_32            (1<<2)
> -#define XLF_EFI_HANDOVER_64            (1<<3)
> -#define XLF_EFI_KEXEC                  (1<<4)
> -#define XLF_5LEVEL                     (1<<5)
> -#define XLF_5LEVEL_ENABLED             (1<<6)
> +#include <asm/setup_data.h>
>
>  #ifndef __ASSEMBLY__
>
> @@ -48,139 +13,6 @@
>  #include <asm/ist.h>
>  #include <video/edid.h>
>
> -/* extensible setup data list node */
> -struct setup_data {
> -       __u64 next;
> -       __u32 type;
> -       __u32 len;
> -       __u8 data[];
> -};
> -
> -/* extensible setup indirect data node */
> -struct setup_indirect {
> -       __u32 type;
> -       __u32 reserved;  /* Reserved, must be set to zero. */
> -       __u64 len;
> -       __u64 addr;
> -};
> -
> -struct setup_header {
> -       __u8    setup_sects;
> -       __u16   root_flags;
> -       __u32   syssize;
> -       __u16   ram_size;
> -       __u16   vid_mode;
> -       __u16   root_dev;
> -       __u16   boot_flag;
> -       __u16   jump;
> -       __u32   header;
> -       __u16   version;
> -       __u32   realmode_swtch;
> -       __u16   start_sys_seg;
> -       __u16   kernel_version;
> -       __u8    type_of_loader;
> -       __u8    loadflags;
> -       __u16   setup_move_size;
> -       __u32   code32_start;
> -       __u32   ramdisk_image;
> -       __u32   ramdisk_size;
> -       __u32   bootsect_kludge;
> -       __u16   heap_end_ptr;
> -       __u8    ext_loader_ver;
> -       __u8    ext_loader_type;
> -       __u32   cmd_line_ptr;
> -       __u32   initrd_addr_max;
> -       __u32   kernel_alignment;
> -       __u8    relocatable_kernel;
> -       __u8    min_alignment;
> -       __u16   xloadflags;
> -       __u32   cmdline_size;
> -       __u32   hardware_subarch;
> -       __u64   hardware_subarch_data;
> -       __u32   payload_offset;
> -       __u32   payload_length;
> -       __u64   setup_data;
> -       __u64   pref_address;
> -       __u32   init_size;
> -       __u32   handover_offset;
> -       __u32   kernel_info_offset;
> -} __attribute__((packed));
> -
> -struct sys_desc_table {
> -       __u16 length;
> -       __u8  table[14];
> -};
> -
> -/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
> -struct olpc_ofw_header {
> -       __u32 ofw_magic;        /* OFW signature */
> -       __u32 ofw_version;
> -       __u32 cif_handler;      /* callback into OFW */
> -       __u32 irq_desc_table;
> -} __attribute__((packed));
> -
> -struct efi_info {
> -       __u32 efi_loader_signature;
> -       __u32 efi_systab;
> -       __u32 efi_memdesc_size;
> -       __u32 efi_memdesc_version;
> -       __u32 efi_memmap;
> -       __u32 efi_memmap_size;
> -       __u32 efi_systab_hi;
> -       __u32 efi_memmap_hi;
> -};
> -
> -/*
> - * This is the maximum number of entries in struct boot_params::e820_table
> - * (the zeropage), which is part of the x86 boot protocol ABI:
> - */
> -#define E820_MAX_ENTRIES_ZEROPAGE 128
> -
> -/*
> - * The E820 memory region entry of the boot protocol ABI:
> - */
> -struct boot_e820_entry {
> -       __u64 addr;
> -       __u64 size;
> -       __u32 type;
> -} __attribute__((packed));
> -
> -/*
> - * Smallest compatible version of jailhouse_setup_data required by this kernel.
> - */
> -#define JAILHOUSE_SETUP_REQUIRED_VERSION       1
> -
> -/*
> - * The boot loader is passing platform information via this Jailhouse-specific
> - * setup data structure.
> - */
> -struct jailhouse_setup_data {
> -       struct {
> -               __u16   version;
> -               __u16   compatible_version;
> -       } __attribute__((packed)) hdr;
> -       struct {
> -               __u16   pm_timer_address;
> -               __u16   num_cpus;
> -               __u64   pci_mmconfig_base;
> -               __u32   tsc_khz;
> -               __u32   apic_khz;
> -               __u8    standard_ioapic;
> -               __u8    cpu_ids[255];
> -       } __attribute__((packed)) v1;
> -       struct {
> -               __u32   flags;
> -       } __attribute__((packed)) v2;
> -} __attribute__((packed));
> -
> -/*
> - * IMA buffer setup data information from the previous kernel during kexec
> - */
> -struct ima_setup_data {
> -       __u64 addr;
> -       __u64 size;
> -} __attribute__((packed));
> -
>  /* The so-called "zeropage" */
>  struct boot_params {
>         struct screen_info screen_info;                 /* 0x000 */
> @@ -231,54 +63,6 @@ struct boot_params {
>         __u8  _pad9[276];                               /* 0xeec */
>  } __attribute__((packed));
>
> -/**
> - * enum x86_hardware_subarch - x86 hardware subarchitecture
> - *
> - * The x86 hardware_subarch and hardware_subarch_data were added as of the x86
> - * boot protocol 2.07 to help distinguish and support custom x86 boot
> - * sequences. This enum represents accepted values for the x86
> - * hardware_subarch.  Custom x86 boot sequences (not X86_SUBARCH_PC) do not
> - * have or simply *cannot* make use of natural stubs like BIOS or EFI, the
> - * hardware_subarch can be used on the Linux entry path to revector to a
> - * subarchitecture stub when needed. This subarchitecture stub can be used to
> - * set up Linux boot parameters or for special care to account for nonstandard
> - * handling of page tables.
> - *
> - * These enums should only ever be used by x86 code, and the code that uses
> - * it should be well contained and compartmentalized.
> - *
> - * KVM and Xen HVM do not have a subarch as these are expected to follow
> - * standard x86 boot entries. If there is a genuine need for "hypervisor" type
> - * that should be considered separately in the future. Future guest types
> - * should seriously consider working with standard x86 boot stubs such as
> - * the BIOS or EFI boot stubs.
> - *
> - * WARNING: this enum is only used for legacy hacks, for platform features that
> - *         are not easily enumerated or discoverable. You should not ever use
> - *         this for new features.
> - *
> - * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
> - *     PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
> - * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
> - * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
> - *     which start at asm startup_xen() entry point and later jump to the C
> - *     xen_start_kernel() entry point. Both domU and dom0 type of guests are
> - *     currently supported through this PV boot path.
> - * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
> - *     systems which do not have the PCI legacy interfaces.
> - * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
> - *     for settop boxes and media devices, the use of a subarch for CE4100
> - *     is more of a hack...
> - */
> -enum x86_hardware_subarch {
> -       X86_SUBARCH_PC = 0,
> -       X86_SUBARCH_LGUEST,
> -       X86_SUBARCH_XEN,
> -       X86_SUBARCH_INTEL_MID,
> -       X86_SUBARCH_CE4100,
> -       X86_NR_SUBARCHS,
> -};
> -
>  #endif /* __ASSEMBLY__ */
>
>  #endif /* _ASM_X86_BOOTPARAM_H */
> diff --git a/arch/x86/include/uapi/asm/setup_data.h b/arch/x86/include/uapi/asm/setup_data.h
> new file mode 100644
> index 000000000000..e1396e1bf048
> --- /dev/null
> +++ b/arch/x86/include/uapi/asm/setup_data.h
> @@ -0,0 +1,229 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +#ifndef _UAPI_ASM_X86_SETUP_DATA_H
> +#define _UAPI_ASM_X86_SETUP_DATA_H
> +
> +/* setup_data/setup_indirect types */
> +#define SETUP_NONE                     0
> +#define SETUP_E820_EXT                 1
> +#define SETUP_DTB                      2
> +#define SETUP_PCI                      3
> +#define SETUP_EFI                      4
> +#define SETUP_APPLE_PROPERTIES         5
> +#define SETUP_JAILHOUSE                        6
> +#define SETUP_CC_BLOB                  7
> +#define SETUP_IMA                      8
> +#define SETUP_RNG_SEED                 9
> +#define SETUP_ENUM_MAX                 SETUP_RNG_SEED
> +
> +#define SETUP_INDIRECT                 (1<<31)
> +#define SETUP_TYPE_MAX                 (SETUP_ENUM_MAX | SETUP_INDIRECT)
> +
> +/* ram_size flags */
> +#define RAMDISK_IMAGE_START_MASK       0x07FF
> +#define RAMDISK_PROMPT_FLAG            0x8000
> +#define RAMDISK_LOAD_FLAG              0x4000
> +
> +/* loadflags */
> +#define LOADED_HIGH    (1<<0)
> +#define KASLR_FLAG     (1<<1)
> +#define QUIET_FLAG     (1<<5)
> +#define KEEP_SEGMENTS  (1<<6)
> +#define CAN_USE_HEAP   (1<<7)
> +
> +/* xloadflags */
> +#define XLF_KERNEL_64                  (1<<0)
> +#define XLF_CAN_BE_LOADED_ABOVE_4G     (1<<1)
> +#define XLF_EFI_HANDOVER_32            (1<<2)
> +#define XLF_EFI_HANDOVER_64            (1<<3)
> +#define XLF_EFI_KEXEC                  (1<<4)
> +#define XLF_5LEVEL                     (1<<5)
> +#define XLF_5LEVEL_ENABLED             (1<<6)
> +
> +#ifndef __ASSEMBLY__
> +
> +#include <linux/types.h>
> +
> +/* extensible setup data list node */
> +struct setup_data {
> +       __u64 next;
> +       __u32 type;
> +       __u32 len;
> +       __u8 data[];
> +};
> +
> +/* extensible setup indirect data node */
> +struct setup_indirect {
> +       __u32 type;
> +       __u32 reserved;  /* Reserved, must be set to zero. */
> +       __u64 len;
> +       __u64 addr;
> +};
> +
> +struct setup_header {
> +       __u8    setup_sects;
> +       __u16   root_flags;
> +       __u32   syssize;
> +       __u16   ram_size;
> +       __u16   vid_mode;
> +       __u16   root_dev;
> +       __u16   boot_flag;
> +       __u16   jump;
> +       __u32   header;
> +       __u16   version;
> +       __u32   realmode_swtch;
> +       __u16   start_sys_seg;
> +       __u16   kernel_version;
> +       __u8    type_of_loader;
> +       __u8    loadflags;
> +       __u16   setup_move_size;
> +       __u32   code32_start;
> +       __u32   ramdisk_image;
> +       __u32   ramdisk_size;
> +       __u32   bootsect_kludge;
> +       __u16   heap_end_ptr;
> +       __u8    ext_loader_ver;
> +       __u8    ext_loader_type;
> +       __u32   cmd_line_ptr;
> +       __u32   initrd_addr_max;
> +       __u32   kernel_alignment;
> +       __u8    relocatable_kernel;
> +       __u8    min_alignment;
> +       __u16   xloadflags;
> +       __u32   cmdline_size;
> +       __u32   hardware_subarch;
> +       __u64   hardware_subarch_data;
> +       __u32   payload_offset;
> +       __u32   payload_length;
> +       __u64   setup_data;
> +       __u64   pref_address;
> +       __u32   init_size;
> +       __u32   handover_offset;
> +       __u32   kernel_info_offset;
> +} __attribute__((packed));
> +
> +struct sys_desc_table {
> +       __u16 length;
> +       __u8  table[14];
> +};
> +
> +/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
> +struct olpc_ofw_header {
> +       __u32 ofw_magic;        /* OFW signature */
> +       __u32 ofw_version;
> +       __u32 cif_handler;      /* callback into OFW */
> +       __u32 irq_desc_table;
> +} __attribute__((packed));
> +
> +struct efi_info {
> +       __u32 efi_loader_signature;
> +       __u32 efi_systab;
> +       __u32 efi_memdesc_size;
> +       __u32 efi_memdesc_version;
> +       __u32 efi_memmap;
> +       __u32 efi_memmap_size;
> +       __u32 efi_systab_hi;
> +       __u32 efi_memmap_hi;
> +};
> +
> +/*
> + * This is the maximum number of entries in struct boot_params::e820_table
> + * (the zeropage), which is part of the x86 boot protocol ABI:
> + */
> +#define E820_MAX_ENTRIES_ZEROPAGE 128
> +
> +/*
> + * The E820 memory region entry of the boot protocol ABI:
> + */
> +struct boot_e820_entry {
> +       __u64 addr;
> +       __u64 size;
> +       __u32 type;
> +} __attribute__((packed));
> +
> +/*
> + * Smallest compatible version of jailhouse_setup_data required by this kernel.
> + */
> +#define JAILHOUSE_SETUP_REQUIRED_VERSION       1
> +
> +/*
> + * The boot loader is passing platform information via this Jailhouse-specific
> + * setup data structure.
> + */
> +struct jailhouse_setup_data {
> +       struct {
> +               __u16   version;
> +               __u16   compatible_version;
> +       } __attribute__((packed)) hdr;
> +       struct {
> +               __u16   pm_timer_address;
> +               __u16   num_cpus;
> +               __u64   pci_mmconfig_base;
> +               __u32   tsc_khz;
> +               __u32   apic_khz;
> +               __u8    standard_ioapic;
> +               __u8    cpu_ids[255];
> +       } __attribute__((packed)) v1;
> +       struct {
> +               __u32   flags;
> +       } __attribute__((packed)) v2;
> +} __attribute__((packed));
> +
> +/*
> + * IMA buffer setup data information from the previous kernel during kexec
> + */
> +struct ima_setup_data {
> +       __u64 addr;
> +       __u64 size;
> +} __attribute__((packed));
> +
> +/**
> + * enum x86_hardware_subarch - x86 hardware subarchitecture
> + *
> + * The x86 hardware_subarch and hardware_subarch_data were added as of the x86
> + * boot protocol 2.07 to help distinguish and support custom x86 boot
> + * sequences. This enum represents accepted values for the x86
> + * hardware_subarch.  Custom x86 boot sequences (not X86_SUBARCH_PC) do not
> + * have or simply *cannot* make use of natural stubs like BIOS or EFI, the
> + * hardware_subarch can be used on the Linux entry path to revector to a
> + * subarchitecture stub when needed. This subarchitecture stub can be used to
> + * set up Linux boot parameters or for special care to account for nonstandard
> + * handling of page tables.
> + *
> + * These enums should only ever be used by x86 code, and the code that uses
> + * it should be well contained and compartmentalized.
> + *
> + * KVM and Xen HVM do not have a subarch as these are expected to follow
> + * standard x86 boot entries. If there is a genuine need for "hypervisor" type
> + * that should be considered separately in the future. Future guest types
> + * should seriously consider working with standard x86 boot stubs such as
> + * the BIOS or EFI boot stubs.
> + *
> + * WARNING: this enum is only used for legacy hacks, for platform features that
> + *         are not easily enumerated or discoverable. You should not ever use
> + *         this for new features.
> + *
> + * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
> + *     PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
> + * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
> + * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
> + *     which start at asm startup_xen() entry point and later jump to the C
> + *     xen_start_kernel() entry point. Both domU and dom0 type of guests are
> + *     currently supported through this PV boot path.
> + * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
> + *     systems which do not have the PCI legacy interfaces.
> + * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
> + *     for settop boxes and media devices, the use of a subarch for CE4100
> + *     is more of a hack...
> + */
> +enum x86_hardware_subarch {
> +       X86_SUBARCH_PC = 0,
> +       X86_SUBARCH_LGUEST,
> +       X86_SUBARCH_XEN,
> +       X86_SUBARCH_INTEL_MID,
> +       X86_SUBARCH_CE4100,
> +       X86_NR_SUBARCHS,
> +};
> +
> +#endif /* __ASSEMBLY__ */
> +
> +#endif /* _UAPI_ASM_X86_SETUP_DATA_H */
> --
> 2.43.0
>
>
Thomas Zimmermann Jan. 2, 2024, 2:02 p.m. UTC | #2
Hi Ard

Am 19.12.23 um 11:50 schrieb Ard Biesheuvel:
> Hi Thomas,
> 
> On Fri, 15 Dec 2023 at 13:26, Thomas Zimmermann <tzimmermann@suse.de> wrote:
>>
>> The type definition of struct pci_setup_rom in <asm/pci.h> requires
>> struct setup_data from <asm/bootparam.h>. Many drivers include
>> <linux/pci.h>, but do not use boot parameters. Changes to bootparam.h
>> or its included header files could easily trigger a large, unnecessary
>> rebuild of the kernel.
>>
>> Moving struct setup_data and related code into its own own header file
>> avoids including <asm/bootparam.h> in <asm/pci.h>. Instead include the
>> new header <asm/screen_data.h> and remove the include statement for
>> x86_init.h, which is unnecessary but pulls in bootparams.h.
>>
>> Suggested-by: Ard Biesheuvel <ardb@kernel.org>
>> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
>> ---
>>   arch/x86/include/asm/pci.h             |   2 +-
>>   arch/x86/include/uapi/asm/bootparam.h  | 218 +----------------------
>>   arch/x86/include/uapi/asm/setup_data.h | 229 +++++++++++++++++++++++++
>>   3 files changed, 231 insertions(+), 218 deletions(-)
>>   create mode 100644 arch/x86/include/uapi/asm/setup_data.h
>>
> 
> This is an improvement but not quite what I had in mind: setup_data is
> a x86 specific linked list that is only referred to via a u64 in
> setup_header.
> 
> So setup_data and all the specializations belong in setup_data.h.
> OTOH, setup_header, the XLF load flags, efi_info, the e820 related
> definitions etc are not related to setup_data at all but to
> setup_header. Whether or not setup_header could live in its own header
> too (along with those related definitions) is a separate question imo,
> but I don't think they belong in setup_data.h

Thanks for the feedback. I'll send out an update to address this and 
additional changes for PCI and EFI.

So fa, the only reason for a setup_header header file would be 
e820/types.h which includes bootparam.h for E820_MAX_ENTRIES_ZEROPAGE. 
It doesn't make a difference in build time, tough.

Best regards
Thomas

> 
> 
> 
>> diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
>> index b40c462b4af3..f6100df3652e 100644
>> --- a/arch/x86/include/asm/pci.h
>> +++ b/arch/x86/include/asm/pci.h
>> @@ -10,7 +10,7 @@
>>   #include <linux/numa.h>
>>   #include <asm/io.h>
>>   #include <asm/memtype.h>
>> -#include <asm/x86_init.h>
>> +#include <asm/setup_data.h>
>>
>>   struct pci_sysdata {
>>          int             domain;         /* PCI domain */
>> diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h
>> index 01d19fc22346..f6361eb792fd 100644
>> --- a/arch/x86/include/uapi/asm/bootparam.h
>> +++ b/arch/x86/include/uapi/asm/bootparam.h
>> @@ -2,42 +2,7 @@
>>   #ifndef _ASM_X86_BOOTPARAM_H
>>   #define _ASM_X86_BOOTPARAM_H
>>
>> -/* setup_data/setup_indirect types */
>> -#define SETUP_NONE                     0
>> -#define SETUP_E820_EXT                 1
>> -#define SETUP_DTB                      2
>> -#define SETUP_PCI                      3
>> -#define SETUP_EFI                      4
>> -#define SETUP_APPLE_PROPERTIES         5
>> -#define SETUP_JAILHOUSE                        6
>> -#define SETUP_CC_BLOB                  7
>> -#define SETUP_IMA                      8
>> -#define SETUP_RNG_SEED                 9
>> -#define SETUP_ENUM_MAX                 SETUP_RNG_SEED
>> -
>> -#define SETUP_INDIRECT                 (1<<31)
>> -#define SETUP_TYPE_MAX                 (SETUP_ENUM_MAX | SETUP_INDIRECT)
>> -
>> -/* ram_size flags */
>> -#define RAMDISK_IMAGE_START_MASK       0x07FF
>> -#define RAMDISK_PROMPT_FLAG            0x8000
>> -#define RAMDISK_LOAD_FLAG              0x4000
>> -
>> -/* loadflags */
>> -#define LOADED_HIGH    (1<<0)
>> -#define KASLR_FLAG     (1<<1)
>> -#define QUIET_FLAG     (1<<5)
>> -#define KEEP_SEGMENTS  (1<<6)
>> -#define CAN_USE_HEAP   (1<<7)
>> -
>> -/* xloadflags */
>> -#define XLF_KERNEL_64                  (1<<0)
>> -#define XLF_CAN_BE_LOADED_ABOVE_4G     (1<<1)
>> -#define XLF_EFI_HANDOVER_32            (1<<2)
>> -#define XLF_EFI_HANDOVER_64            (1<<3)
>> -#define XLF_EFI_KEXEC                  (1<<4)
>> -#define XLF_5LEVEL                     (1<<5)
>> -#define XLF_5LEVEL_ENABLED             (1<<6)
>> +#include <asm/setup_data.h>
>>
>>   #ifndef __ASSEMBLY__
>>
>> @@ -48,139 +13,6 @@
>>   #include <asm/ist.h>
>>   #include <video/edid.h>
>>
>> -/* extensible setup data list node */
>> -struct setup_data {
>> -       __u64 next;
>> -       __u32 type;
>> -       __u32 len;
>> -       __u8 data[];
>> -};
>> -
>> -/* extensible setup indirect data node */
>> -struct setup_indirect {
>> -       __u32 type;
>> -       __u32 reserved;  /* Reserved, must be set to zero. */
>> -       __u64 len;
>> -       __u64 addr;
>> -};
>> -
>> -struct setup_header {
>> -       __u8    setup_sects;
>> -       __u16   root_flags;
>> -       __u32   syssize;
>> -       __u16   ram_size;
>> -       __u16   vid_mode;
>> -       __u16   root_dev;
>> -       __u16   boot_flag;
>> -       __u16   jump;
>> -       __u32   header;
>> -       __u16   version;
>> -       __u32   realmode_swtch;
>> -       __u16   start_sys_seg;
>> -       __u16   kernel_version;
>> -       __u8    type_of_loader;
>> -       __u8    loadflags;
>> -       __u16   setup_move_size;
>> -       __u32   code32_start;
>> -       __u32   ramdisk_image;
>> -       __u32   ramdisk_size;
>> -       __u32   bootsect_kludge;
>> -       __u16   heap_end_ptr;
>> -       __u8    ext_loader_ver;
>> -       __u8    ext_loader_type;
>> -       __u32   cmd_line_ptr;
>> -       __u32   initrd_addr_max;
>> -       __u32   kernel_alignment;
>> -       __u8    relocatable_kernel;
>> -       __u8    min_alignment;
>> -       __u16   xloadflags;
>> -       __u32   cmdline_size;
>> -       __u32   hardware_subarch;
>> -       __u64   hardware_subarch_data;
>> -       __u32   payload_offset;
>> -       __u32   payload_length;
>> -       __u64   setup_data;
>> -       __u64   pref_address;
>> -       __u32   init_size;
>> -       __u32   handover_offset;
>> -       __u32   kernel_info_offset;
>> -} __attribute__((packed));
>> -
>> -struct sys_desc_table {
>> -       __u16 length;
>> -       __u8  table[14];
>> -};
>> -
>> -/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
>> -struct olpc_ofw_header {
>> -       __u32 ofw_magic;        /* OFW signature */
>> -       __u32 ofw_version;
>> -       __u32 cif_handler;      /* callback into OFW */
>> -       __u32 irq_desc_table;
>> -} __attribute__((packed));
>> -
>> -struct efi_info {
>> -       __u32 efi_loader_signature;
>> -       __u32 efi_systab;
>> -       __u32 efi_memdesc_size;
>> -       __u32 efi_memdesc_version;
>> -       __u32 efi_memmap;
>> -       __u32 efi_memmap_size;
>> -       __u32 efi_systab_hi;
>> -       __u32 efi_memmap_hi;
>> -};
>> -
>> -/*
>> - * This is the maximum number of entries in struct boot_params::e820_table
>> - * (the zeropage), which is part of the x86 boot protocol ABI:
>> - */
>> -#define E820_MAX_ENTRIES_ZEROPAGE 128
>> -
>> -/*
>> - * The E820 memory region entry of the boot protocol ABI:
>> - */
>> -struct boot_e820_entry {
>> -       __u64 addr;
>> -       __u64 size;
>> -       __u32 type;
>> -} __attribute__((packed));
>> -
>> -/*
>> - * Smallest compatible version of jailhouse_setup_data required by this kernel.
>> - */
>> -#define JAILHOUSE_SETUP_REQUIRED_VERSION       1
>> -
>> -/*
>> - * The boot loader is passing platform information via this Jailhouse-specific
>> - * setup data structure.
>> - */
>> -struct jailhouse_setup_data {
>> -       struct {
>> -               __u16   version;
>> -               __u16   compatible_version;
>> -       } __attribute__((packed)) hdr;
>> -       struct {
>> -               __u16   pm_timer_address;
>> -               __u16   num_cpus;
>> -               __u64   pci_mmconfig_base;
>> -               __u32   tsc_khz;
>> -               __u32   apic_khz;
>> -               __u8    standard_ioapic;
>> -               __u8    cpu_ids[255];
>> -       } __attribute__((packed)) v1;
>> -       struct {
>> -               __u32   flags;
>> -       } __attribute__((packed)) v2;
>> -} __attribute__((packed));
>> -
>> -/*
>> - * IMA buffer setup data information from the previous kernel during kexec
>> - */
>> -struct ima_setup_data {
>> -       __u64 addr;
>> -       __u64 size;
>> -} __attribute__((packed));
>> -
>>   /* The so-called "zeropage" */
>>   struct boot_params {
>>          struct screen_info screen_info;                 /* 0x000 */
>> @@ -231,54 +63,6 @@ struct boot_params {
>>          __u8  _pad9[276];                               /* 0xeec */
>>   } __attribute__((packed));
>>
>> -/**
>> - * enum x86_hardware_subarch - x86 hardware subarchitecture
>> - *
>> - * The x86 hardware_subarch and hardware_subarch_data were added as of the x86
>> - * boot protocol 2.07 to help distinguish and support custom x86 boot
>> - * sequences. This enum represents accepted values for the x86
>> - * hardware_subarch.  Custom x86 boot sequences (not X86_SUBARCH_PC) do not
>> - * have or simply *cannot* make use of natural stubs like BIOS or EFI, the
>> - * hardware_subarch can be used on the Linux entry path to revector to a
>> - * subarchitecture stub when needed. This subarchitecture stub can be used to
>> - * set up Linux boot parameters or for special care to account for nonstandard
>> - * handling of page tables.
>> - *
>> - * These enums should only ever be used by x86 code, and the code that uses
>> - * it should be well contained and compartmentalized.
>> - *
>> - * KVM and Xen HVM do not have a subarch as these are expected to follow
>> - * standard x86 boot entries. If there is a genuine need for "hypervisor" type
>> - * that should be considered separately in the future. Future guest types
>> - * should seriously consider working with standard x86 boot stubs such as
>> - * the BIOS or EFI boot stubs.
>> - *
>> - * WARNING: this enum is only used for legacy hacks, for platform features that
>> - *         are not easily enumerated or discoverable. You should not ever use
>> - *         this for new features.
>> - *
>> - * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
>> - *     PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
>> - * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
>> - * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
>> - *     which start at asm startup_xen() entry point and later jump to the C
>> - *     xen_start_kernel() entry point. Both domU and dom0 type of guests are
>> - *     currently supported through this PV boot path.
>> - * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
>> - *     systems which do not have the PCI legacy interfaces.
>> - * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
>> - *     for settop boxes and media devices, the use of a subarch for CE4100
>> - *     is more of a hack...
>> - */
>> -enum x86_hardware_subarch {
>> -       X86_SUBARCH_PC = 0,
>> -       X86_SUBARCH_LGUEST,
>> -       X86_SUBARCH_XEN,
>> -       X86_SUBARCH_INTEL_MID,
>> -       X86_SUBARCH_CE4100,
>> -       X86_NR_SUBARCHS,
>> -};
>> -
>>   #endif /* __ASSEMBLY__ */
>>
>>   #endif /* _ASM_X86_BOOTPARAM_H */
>> diff --git a/arch/x86/include/uapi/asm/setup_data.h b/arch/x86/include/uapi/asm/setup_data.h
>> new file mode 100644
>> index 000000000000..e1396e1bf048
>> --- /dev/null
>> +++ b/arch/x86/include/uapi/asm/setup_data.h
>> @@ -0,0 +1,229 @@
>> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
>> +#ifndef _UAPI_ASM_X86_SETUP_DATA_H
>> +#define _UAPI_ASM_X86_SETUP_DATA_H
>> +
>> +/* setup_data/setup_indirect types */
>> +#define SETUP_NONE                     0
>> +#define SETUP_E820_EXT                 1
>> +#define SETUP_DTB                      2
>> +#define SETUP_PCI                      3
>> +#define SETUP_EFI                      4
>> +#define SETUP_APPLE_PROPERTIES         5
>> +#define SETUP_JAILHOUSE                        6
>> +#define SETUP_CC_BLOB                  7
>> +#define SETUP_IMA                      8
>> +#define SETUP_RNG_SEED                 9
>> +#define SETUP_ENUM_MAX                 SETUP_RNG_SEED
>> +
>> +#define SETUP_INDIRECT                 (1<<31)
>> +#define SETUP_TYPE_MAX                 (SETUP_ENUM_MAX | SETUP_INDIRECT)
>> +
>> +/* ram_size flags */
>> +#define RAMDISK_IMAGE_START_MASK       0x07FF
>> +#define RAMDISK_PROMPT_FLAG            0x8000
>> +#define RAMDISK_LOAD_FLAG              0x4000
>> +
>> +/* loadflags */
>> +#define LOADED_HIGH    (1<<0)
>> +#define KASLR_FLAG     (1<<1)
>> +#define QUIET_FLAG     (1<<5)
>> +#define KEEP_SEGMENTS  (1<<6)
>> +#define CAN_USE_HEAP   (1<<7)
>> +
>> +/* xloadflags */
>> +#define XLF_KERNEL_64                  (1<<0)
>> +#define XLF_CAN_BE_LOADED_ABOVE_4G     (1<<1)
>> +#define XLF_EFI_HANDOVER_32            (1<<2)
>> +#define XLF_EFI_HANDOVER_64            (1<<3)
>> +#define XLF_EFI_KEXEC                  (1<<4)
>> +#define XLF_5LEVEL                     (1<<5)
>> +#define XLF_5LEVEL_ENABLED             (1<<6)
>> +
>> +#ifndef __ASSEMBLY__
>> +
>> +#include <linux/types.h>
>> +
>> +/* extensible setup data list node */
>> +struct setup_data {
>> +       __u64 next;
>> +       __u32 type;
>> +       __u32 len;
>> +       __u8 data[];
>> +};
>> +
>> +/* extensible setup indirect data node */
>> +struct setup_indirect {
>> +       __u32 type;
>> +       __u32 reserved;  /* Reserved, must be set to zero. */
>> +       __u64 len;
>> +       __u64 addr;
>> +};
>> +
>> +struct setup_header {
>> +       __u8    setup_sects;
>> +       __u16   root_flags;
>> +       __u32   syssize;
>> +       __u16   ram_size;
>> +       __u16   vid_mode;
>> +       __u16   root_dev;
>> +       __u16   boot_flag;
>> +       __u16   jump;
>> +       __u32   header;
>> +       __u16   version;
>> +       __u32   realmode_swtch;
>> +       __u16   start_sys_seg;
>> +       __u16   kernel_version;
>> +       __u8    type_of_loader;
>> +       __u8    loadflags;
>> +       __u16   setup_move_size;
>> +       __u32   code32_start;
>> +       __u32   ramdisk_image;
>> +       __u32   ramdisk_size;
>> +       __u32   bootsect_kludge;
>> +       __u16   heap_end_ptr;
>> +       __u8    ext_loader_ver;
>> +       __u8    ext_loader_type;
>> +       __u32   cmd_line_ptr;
>> +       __u32   initrd_addr_max;
>> +       __u32   kernel_alignment;
>> +       __u8    relocatable_kernel;
>> +       __u8    min_alignment;
>> +       __u16   xloadflags;
>> +       __u32   cmdline_size;
>> +       __u32   hardware_subarch;
>> +       __u64   hardware_subarch_data;
>> +       __u32   payload_offset;
>> +       __u32   payload_length;
>> +       __u64   setup_data;
>> +       __u64   pref_address;
>> +       __u32   init_size;
>> +       __u32   handover_offset;
>> +       __u32   kernel_info_offset;
>> +} __attribute__((packed));
>> +
>> +struct sys_desc_table {
>> +       __u16 length;
>> +       __u8  table[14];
>> +};
>> +
>> +/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
>> +struct olpc_ofw_header {
>> +       __u32 ofw_magic;        /* OFW signature */
>> +       __u32 ofw_version;
>> +       __u32 cif_handler;      /* callback into OFW */
>> +       __u32 irq_desc_table;
>> +} __attribute__((packed));
>> +
>> +struct efi_info {
>> +       __u32 efi_loader_signature;
>> +       __u32 efi_systab;
>> +       __u32 efi_memdesc_size;
>> +       __u32 efi_memdesc_version;
>> +       __u32 efi_memmap;
>> +       __u32 efi_memmap_size;
>> +       __u32 efi_systab_hi;
>> +       __u32 efi_memmap_hi;
>> +};
>> +
>> +/*
>> + * This is the maximum number of entries in struct boot_params::e820_table
>> + * (the zeropage), which is part of the x86 boot protocol ABI:
>> + */
>> +#define E820_MAX_ENTRIES_ZEROPAGE 128
>> +
>> +/*
>> + * The E820 memory region entry of the boot protocol ABI:
>> + */
>> +struct boot_e820_entry {
>> +       __u64 addr;
>> +       __u64 size;
>> +       __u32 type;
>> +} __attribute__((packed));
>> +
>> +/*
>> + * Smallest compatible version of jailhouse_setup_data required by this kernel.
>> + */
>> +#define JAILHOUSE_SETUP_REQUIRED_VERSION       1
>> +
>> +/*
>> + * The boot loader is passing platform information via this Jailhouse-specific
>> + * setup data structure.
>> + */
>> +struct jailhouse_setup_data {
>> +       struct {
>> +               __u16   version;
>> +               __u16   compatible_version;
>> +       } __attribute__((packed)) hdr;
>> +       struct {
>> +               __u16   pm_timer_address;
>> +               __u16   num_cpus;
>> +               __u64   pci_mmconfig_base;
>> +               __u32   tsc_khz;
>> +               __u32   apic_khz;
>> +               __u8    standard_ioapic;
>> +               __u8    cpu_ids[255];
>> +       } __attribute__((packed)) v1;
>> +       struct {
>> +               __u32   flags;
>> +       } __attribute__((packed)) v2;
>> +} __attribute__((packed));
>> +
>> +/*
>> + * IMA buffer setup data information from the previous kernel during kexec
>> + */
>> +struct ima_setup_data {
>> +       __u64 addr;
>> +       __u64 size;
>> +} __attribute__((packed));
>> +
>> +/**
>> + * enum x86_hardware_subarch - x86 hardware subarchitecture
>> + *
>> + * The x86 hardware_subarch and hardware_subarch_data were added as of the x86
>> + * boot protocol 2.07 to help distinguish and support custom x86 boot
>> + * sequences. This enum represents accepted values for the x86
>> + * hardware_subarch.  Custom x86 boot sequences (not X86_SUBARCH_PC) do not
>> + * have or simply *cannot* make use of natural stubs like BIOS or EFI, the
>> + * hardware_subarch can be used on the Linux entry path to revector to a
>> + * subarchitecture stub when needed. This subarchitecture stub can be used to
>> + * set up Linux boot parameters or for special care to account for nonstandard
>> + * handling of page tables.
>> + *
>> + * These enums should only ever be used by x86 code, and the code that uses
>> + * it should be well contained and compartmentalized.
>> + *
>> + * KVM and Xen HVM do not have a subarch as these are expected to follow
>> + * standard x86 boot entries. If there is a genuine need for "hypervisor" type
>> + * that should be considered separately in the future. Future guest types
>> + * should seriously consider working with standard x86 boot stubs such as
>> + * the BIOS or EFI boot stubs.
>> + *
>> + * WARNING: this enum is only used for legacy hacks, for platform features that
>> + *         are not easily enumerated or discoverable. You should not ever use
>> + *         this for new features.
>> + *
>> + * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
>> + *     PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
>> + * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
>> + * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
>> + *     which start at asm startup_xen() entry point and later jump to the C
>> + *     xen_start_kernel() entry point. Both domU and dom0 type of guests are
>> + *     currently supported through this PV boot path.
>> + * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
>> + *     systems which do not have the PCI legacy interfaces.
>> + * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
>> + *     for settop boxes and media devices, the use of a subarch for CE4100
>> + *     is more of a hack...
>> + */
>> +enum x86_hardware_subarch {
>> +       X86_SUBARCH_PC = 0,
>> +       X86_SUBARCH_LGUEST,
>> +       X86_SUBARCH_XEN,
>> +       X86_SUBARCH_INTEL_MID,
>> +       X86_SUBARCH_CE4100,
>> +       X86_NR_SUBARCHS,
>> +};
>> +
>> +#endif /* __ASSEMBLY__ */
>> +
>> +#endif /* _UAPI_ASM_X86_SETUP_DATA_H */
>> --
>> 2.43.0
>>
>>
diff mbox series

Patch

diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index b40c462b4af3..f6100df3652e 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -10,7 +10,7 @@ 
 #include <linux/numa.h>
 #include <asm/io.h>
 #include <asm/memtype.h>
-#include <asm/x86_init.h>
+#include <asm/setup_data.h>
 
 struct pci_sysdata {
 	int		domain;		/* PCI domain */
diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h
index 01d19fc22346..f6361eb792fd 100644
--- a/arch/x86/include/uapi/asm/bootparam.h
+++ b/arch/x86/include/uapi/asm/bootparam.h
@@ -2,42 +2,7 @@ 
 #ifndef _ASM_X86_BOOTPARAM_H
 #define _ASM_X86_BOOTPARAM_H
 
-/* setup_data/setup_indirect types */
-#define SETUP_NONE			0
-#define SETUP_E820_EXT			1
-#define SETUP_DTB			2
-#define SETUP_PCI			3
-#define SETUP_EFI			4
-#define SETUP_APPLE_PROPERTIES		5
-#define SETUP_JAILHOUSE			6
-#define SETUP_CC_BLOB			7
-#define SETUP_IMA			8
-#define SETUP_RNG_SEED			9
-#define SETUP_ENUM_MAX			SETUP_RNG_SEED
-
-#define SETUP_INDIRECT			(1<<31)
-#define SETUP_TYPE_MAX			(SETUP_ENUM_MAX | SETUP_INDIRECT)
-
-/* ram_size flags */
-#define RAMDISK_IMAGE_START_MASK	0x07FF
-#define RAMDISK_PROMPT_FLAG		0x8000
-#define RAMDISK_LOAD_FLAG		0x4000
-
-/* loadflags */
-#define LOADED_HIGH	(1<<0)
-#define KASLR_FLAG	(1<<1)
-#define QUIET_FLAG	(1<<5)
-#define KEEP_SEGMENTS	(1<<6)
-#define CAN_USE_HEAP	(1<<7)
-
-/* xloadflags */
-#define XLF_KERNEL_64			(1<<0)
-#define XLF_CAN_BE_LOADED_ABOVE_4G	(1<<1)
-#define XLF_EFI_HANDOVER_32		(1<<2)
-#define XLF_EFI_HANDOVER_64		(1<<3)
-#define XLF_EFI_KEXEC			(1<<4)
-#define XLF_5LEVEL			(1<<5)
-#define XLF_5LEVEL_ENABLED		(1<<6)
+#include <asm/setup_data.h>
 
 #ifndef __ASSEMBLY__
 
@@ -48,139 +13,6 @@ 
 #include <asm/ist.h>
 #include <video/edid.h>
 
-/* extensible setup data list node */
-struct setup_data {
-	__u64 next;
-	__u32 type;
-	__u32 len;
-	__u8 data[];
-};
-
-/* extensible setup indirect data node */
-struct setup_indirect {
-	__u32 type;
-	__u32 reserved;  /* Reserved, must be set to zero. */
-	__u64 len;
-	__u64 addr;
-};
-
-struct setup_header {
-	__u8	setup_sects;
-	__u16	root_flags;
-	__u32	syssize;
-	__u16	ram_size;
-	__u16	vid_mode;
-	__u16	root_dev;
-	__u16	boot_flag;
-	__u16	jump;
-	__u32	header;
-	__u16	version;
-	__u32	realmode_swtch;
-	__u16	start_sys_seg;
-	__u16	kernel_version;
-	__u8	type_of_loader;
-	__u8	loadflags;
-	__u16	setup_move_size;
-	__u32	code32_start;
-	__u32	ramdisk_image;
-	__u32	ramdisk_size;
-	__u32	bootsect_kludge;
-	__u16	heap_end_ptr;
-	__u8	ext_loader_ver;
-	__u8	ext_loader_type;
-	__u32	cmd_line_ptr;
-	__u32	initrd_addr_max;
-	__u32	kernel_alignment;
-	__u8	relocatable_kernel;
-	__u8	min_alignment;
-	__u16	xloadflags;
-	__u32	cmdline_size;
-	__u32	hardware_subarch;
-	__u64	hardware_subarch_data;
-	__u32	payload_offset;
-	__u32	payload_length;
-	__u64	setup_data;
-	__u64	pref_address;
-	__u32	init_size;
-	__u32	handover_offset;
-	__u32	kernel_info_offset;
-} __attribute__((packed));
-
-struct sys_desc_table {
-	__u16 length;
-	__u8  table[14];
-};
-
-/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
-struct olpc_ofw_header {
-	__u32 ofw_magic;	/* OFW signature */
-	__u32 ofw_version;
-	__u32 cif_handler;	/* callback into OFW */
-	__u32 irq_desc_table;
-} __attribute__((packed));
-
-struct efi_info {
-	__u32 efi_loader_signature;
-	__u32 efi_systab;
-	__u32 efi_memdesc_size;
-	__u32 efi_memdesc_version;
-	__u32 efi_memmap;
-	__u32 efi_memmap_size;
-	__u32 efi_systab_hi;
-	__u32 efi_memmap_hi;
-};
-
-/*
- * This is the maximum number of entries in struct boot_params::e820_table
- * (the zeropage), which is part of the x86 boot protocol ABI:
- */
-#define E820_MAX_ENTRIES_ZEROPAGE 128
-
-/*
- * The E820 memory region entry of the boot protocol ABI:
- */
-struct boot_e820_entry {
-	__u64 addr;
-	__u64 size;
-	__u32 type;
-} __attribute__((packed));
-
-/*
- * Smallest compatible version of jailhouse_setup_data required by this kernel.
- */
-#define JAILHOUSE_SETUP_REQUIRED_VERSION	1
-
-/*
- * The boot loader is passing platform information via this Jailhouse-specific
- * setup data structure.
- */
-struct jailhouse_setup_data {
-	struct {
-		__u16	version;
-		__u16	compatible_version;
-	} __attribute__((packed)) hdr;
-	struct {
-		__u16	pm_timer_address;
-		__u16	num_cpus;
-		__u64	pci_mmconfig_base;
-		__u32	tsc_khz;
-		__u32	apic_khz;
-		__u8	standard_ioapic;
-		__u8	cpu_ids[255];
-	} __attribute__((packed)) v1;
-	struct {
-		__u32	flags;
-	} __attribute__((packed)) v2;
-} __attribute__((packed));
-
-/*
- * IMA buffer setup data information from the previous kernel during kexec
- */
-struct ima_setup_data {
-	__u64 addr;
-	__u64 size;
-} __attribute__((packed));
-
 /* The so-called "zeropage" */
 struct boot_params {
 	struct screen_info screen_info;			/* 0x000 */
@@ -231,54 +63,6 @@  struct boot_params {
 	__u8  _pad9[276];				/* 0xeec */
 } __attribute__((packed));
 
-/**
- * enum x86_hardware_subarch - x86 hardware subarchitecture
- *
- * The x86 hardware_subarch and hardware_subarch_data were added as of the x86
- * boot protocol 2.07 to help distinguish and support custom x86 boot
- * sequences. This enum represents accepted values for the x86
- * hardware_subarch.  Custom x86 boot sequences (not X86_SUBARCH_PC) do not
- * have or simply *cannot* make use of natural stubs like BIOS or EFI, the
- * hardware_subarch can be used on the Linux entry path to revector to a
- * subarchitecture stub when needed. This subarchitecture stub can be used to
- * set up Linux boot parameters or for special care to account for nonstandard
- * handling of page tables.
- *
- * These enums should only ever be used by x86 code, and the code that uses
- * it should be well contained and compartmentalized.
- *
- * KVM and Xen HVM do not have a subarch as these are expected to follow
- * standard x86 boot entries. If there is a genuine need for "hypervisor" type
- * that should be considered separately in the future. Future guest types
- * should seriously consider working with standard x86 boot stubs such as
- * the BIOS or EFI boot stubs.
- *
- * WARNING: this enum is only used for legacy hacks, for platform features that
- *	    are not easily enumerated or discoverable. You should not ever use
- *	    this for new features.
- *
- * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
- *	PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
- * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
- * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
- * 	which start at asm startup_xen() entry point and later jump to the C
- * 	xen_start_kernel() entry point. Both domU and dom0 type of guests are
- * 	currently supported through this PV boot path.
- * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
- *	systems which do not have the PCI legacy interfaces.
- * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
- * 	for settop boxes and media devices, the use of a subarch for CE4100
- * 	is more of a hack...
- */
-enum x86_hardware_subarch {
-	X86_SUBARCH_PC = 0,
-	X86_SUBARCH_LGUEST,
-	X86_SUBARCH_XEN,
-	X86_SUBARCH_INTEL_MID,
-	X86_SUBARCH_CE4100,
-	X86_NR_SUBARCHS,
-};
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_X86_BOOTPARAM_H */
diff --git a/arch/x86/include/uapi/asm/setup_data.h b/arch/x86/include/uapi/asm/setup_data.h
new file mode 100644
index 000000000000..e1396e1bf048
--- /dev/null
+++ b/arch/x86/include/uapi/asm/setup_data.h
@@ -0,0 +1,229 @@ 
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_ASM_X86_SETUP_DATA_H
+#define _UAPI_ASM_X86_SETUP_DATA_H
+
+/* setup_data/setup_indirect types */
+#define SETUP_NONE			0
+#define SETUP_E820_EXT			1
+#define SETUP_DTB			2
+#define SETUP_PCI			3
+#define SETUP_EFI			4
+#define SETUP_APPLE_PROPERTIES		5
+#define SETUP_JAILHOUSE			6
+#define SETUP_CC_BLOB			7
+#define SETUP_IMA			8
+#define SETUP_RNG_SEED			9
+#define SETUP_ENUM_MAX			SETUP_RNG_SEED
+
+#define SETUP_INDIRECT			(1<<31)
+#define SETUP_TYPE_MAX			(SETUP_ENUM_MAX | SETUP_INDIRECT)
+
+/* ram_size flags */
+#define RAMDISK_IMAGE_START_MASK	0x07FF
+#define RAMDISK_PROMPT_FLAG		0x8000
+#define RAMDISK_LOAD_FLAG		0x4000
+
+/* loadflags */
+#define LOADED_HIGH	(1<<0)
+#define KASLR_FLAG	(1<<1)
+#define QUIET_FLAG	(1<<5)
+#define KEEP_SEGMENTS	(1<<6)
+#define CAN_USE_HEAP	(1<<7)
+
+/* xloadflags */
+#define XLF_KERNEL_64			(1<<0)
+#define XLF_CAN_BE_LOADED_ABOVE_4G	(1<<1)
+#define XLF_EFI_HANDOVER_32		(1<<2)
+#define XLF_EFI_HANDOVER_64		(1<<3)
+#define XLF_EFI_KEXEC			(1<<4)
+#define XLF_5LEVEL			(1<<5)
+#define XLF_5LEVEL_ENABLED		(1<<6)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* extensible setup data list node */
+struct setup_data {
+	__u64 next;
+	__u32 type;
+	__u32 len;
+	__u8 data[];
+};
+
+/* extensible setup indirect data node */
+struct setup_indirect {
+	__u32 type;
+	__u32 reserved;  /* Reserved, must be set to zero. */
+	__u64 len;
+	__u64 addr;
+};
+
+struct setup_header {
+	__u8	setup_sects;
+	__u16	root_flags;
+	__u32	syssize;
+	__u16	ram_size;
+	__u16	vid_mode;
+	__u16	root_dev;
+	__u16	boot_flag;
+	__u16	jump;
+	__u32	header;
+	__u16	version;
+	__u32	realmode_swtch;
+	__u16	start_sys_seg;
+	__u16	kernel_version;
+	__u8	type_of_loader;
+	__u8	loadflags;
+	__u16	setup_move_size;
+	__u32	code32_start;
+	__u32	ramdisk_image;
+	__u32	ramdisk_size;
+	__u32	bootsect_kludge;
+	__u16	heap_end_ptr;
+	__u8	ext_loader_ver;
+	__u8	ext_loader_type;
+	__u32	cmd_line_ptr;
+	__u32	initrd_addr_max;
+	__u32	kernel_alignment;
+	__u8	relocatable_kernel;
+	__u8	min_alignment;
+	__u16	xloadflags;
+	__u32	cmdline_size;
+	__u32	hardware_subarch;
+	__u64	hardware_subarch_data;
+	__u32	payload_offset;
+	__u32	payload_length;
+	__u64	setup_data;
+	__u64	pref_address;
+	__u32	init_size;
+	__u32	handover_offset;
+	__u32	kernel_info_offset;
+} __attribute__((packed));
+
+struct sys_desc_table {
+	__u16 length;
+	__u8  table[14];
+};
+
+/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */
+struct olpc_ofw_header {
+	__u32 ofw_magic;	/* OFW signature */
+	__u32 ofw_version;
+	__u32 cif_handler;	/* callback into OFW */
+	__u32 irq_desc_table;
+} __attribute__((packed));
+
+struct efi_info {
+	__u32 efi_loader_signature;
+	__u32 efi_systab;
+	__u32 efi_memdesc_size;
+	__u32 efi_memdesc_version;
+	__u32 efi_memmap;
+	__u32 efi_memmap_size;
+	__u32 efi_systab_hi;
+	__u32 efi_memmap_hi;
+};
+
+/*
+ * This is the maximum number of entries in struct boot_params::e820_table
+ * (the zeropage), which is part of the x86 boot protocol ABI:
+ */
+#define E820_MAX_ENTRIES_ZEROPAGE 128
+
+/*
+ * The E820 memory region entry of the boot protocol ABI:
+ */
+struct boot_e820_entry {
+	__u64 addr;
+	__u64 size;
+	__u32 type;
+} __attribute__((packed));
+
+/*
+ * Smallest compatible version of jailhouse_setup_data required by this kernel.
+ */
+#define JAILHOUSE_SETUP_REQUIRED_VERSION	1
+
+/*
+ * The boot loader is passing platform information via this Jailhouse-specific
+ * setup data structure.
+ */
+struct jailhouse_setup_data {
+	struct {
+		__u16	version;
+		__u16	compatible_version;
+	} __attribute__((packed)) hdr;
+	struct {
+		__u16	pm_timer_address;
+		__u16	num_cpus;
+		__u64	pci_mmconfig_base;
+		__u32	tsc_khz;
+		__u32	apic_khz;
+		__u8	standard_ioapic;
+		__u8	cpu_ids[255];
+	} __attribute__((packed)) v1;
+	struct {
+		__u32	flags;
+	} __attribute__((packed)) v2;
+} __attribute__((packed));
+
+/*
+ * IMA buffer setup data information from the previous kernel during kexec
+ */
+struct ima_setup_data {
+	__u64 addr;
+	__u64 size;
+} __attribute__((packed));
+
+/**
+ * enum x86_hardware_subarch - x86 hardware subarchitecture
+ *
+ * The x86 hardware_subarch and hardware_subarch_data were added as of the x86
+ * boot protocol 2.07 to help distinguish and support custom x86 boot
+ * sequences. This enum represents accepted values for the x86
+ * hardware_subarch.  Custom x86 boot sequences (not X86_SUBARCH_PC) do not
+ * have or simply *cannot* make use of natural stubs like BIOS or EFI, the
+ * hardware_subarch can be used on the Linux entry path to revector to a
+ * subarchitecture stub when needed. This subarchitecture stub can be used to
+ * set up Linux boot parameters or for special care to account for nonstandard
+ * handling of page tables.
+ *
+ * These enums should only ever be used by x86 code, and the code that uses
+ * it should be well contained and compartmentalized.
+ *
+ * KVM and Xen HVM do not have a subarch as these are expected to follow
+ * standard x86 boot entries. If there is a genuine need for "hypervisor" type
+ * that should be considered separately in the future. Future guest types
+ * should seriously consider working with standard x86 boot stubs such as
+ * the BIOS or EFI boot stubs.
+ *
+ * WARNING: this enum is only used for legacy hacks, for platform features that
+ *	    are not easily enumerated or discoverable. You should not ever use
+ *	    this for new features.
+ *
+ * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard
+ *	PC mechanisms (PCI, ACPI) and doesn't need a special boot flow.
+ * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated
+ * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path,
+ * 	which start at asm startup_xen() entry point and later jump to the C
+ * 	xen_start_kernel() entry point. Both domU and dom0 type of guests are
+ * 	currently supported through this PV boot path.
+ * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform
+ *	systems which do not have the PCI legacy interfaces.
+ * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC
+ * 	for settop boxes and media devices, the use of a subarch for CE4100
+ * 	is more of a hack...
+ */
+enum x86_hardware_subarch {
+	X86_SUBARCH_PC = 0,
+	X86_SUBARCH_LGUEST,
+	X86_SUBARCH_XEN,
+	X86_SUBARCH_INTEL_MID,
+	X86_SUBARCH_CE4100,
+	X86_NR_SUBARCHS,
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _UAPI_ASM_X86_SETUP_DATA_H */