diff mbox series

[RFC,4/7] iio: addac: ad74115: Use devm_regulator_get_enable_get_voltage()

Message ID 20240327-regulator-get-enable-get-votlage-v1-4-5f4517faa059@baylibre.com
State New
Headers show
Series regulator: new APIs for voltage reference supplies | expand

Commit Message

David Lechner March 27, 2024, 11:18 p.m. UTC
We can reduce boilerplate code by using
devm_regulator_get_enable_get_voltage().

Signed-off-by: David Lechner <dlechner@baylibre.com>
---
 drivers/iio/addac/ad74115.c | 28 +++-------------------------
 1 file changed, 3 insertions(+), 25 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/addac/ad74115.c b/drivers/iio/addac/ad74115.c
index e6bc5eb3788d..01073d7de6aa 100644
--- a/drivers/iio/addac/ad74115.c
+++ b/drivers/iio/addac/ad74115.c
@@ -199,7 +199,6 @@  struct ad74115_state {
 	struct spi_device		*spi;
 	struct regmap			*regmap;
 	struct iio_trigger		*trig;
-	struct regulator		*avdd;
 
 	/*
 	 * Synchronize consecutive operations when doing a one-shot
@@ -1672,14 +1671,6 @@  static int ad74115_setup(struct iio_dev *indio_dev)
 	if (ret)
 		return ret;
 
-	if (val == AD74115_DIN_THRESHOLD_MODE_AVDD) {
-		ret = regulator_get_voltage(st->avdd);
-		if (ret < 0)
-			return ret;
-
-		st->avdd_mv = ret / 1000;
-	}
-
 	st->din_threshold_mode = val;
 
 	ret = ad74115_apply_fw_prop(st, &ad74115_dac_bipolar_fw_prop, &val);
@@ -1788,11 +1779,6 @@  static int ad74115_reset(struct ad74115_state *st)
 	return 0;
 }
 
-static void ad74115_regulator_disable(void *data)
-{
-	regulator_disable(data);
-}
-
 static int ad74115_setup_trigger(struct iio_dev *indio_dev)
 {
 	struct ad74115_state *st = iio_priv(indio_dev);
@@ -1855,19 +1841,11 @@  static int ad74115_probe(struct spi_device *spi)
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &ad74115_info;
 
-	st->avdd = devm_regulator_get(dev, "avdd");
-	if (IS_ERR(st->avdd))
-		return PTR_ERR(st->avdd);
-
-	ret = regulator_enable(st->avdd);
-	if (ret) {
-		dev_err(dev, "Failed to enable avdd regulator\n");
+	ret = devm_regulator_get_enable_get_voltage(dev, "avdd");
+	if (ret < 0)
 		return ret;
-	}
 
-	ret = devm_add_action_or_reset(dev, ad74115_regulator_disable, st->avdd);
-	if (ret)
-		return ret;
+	st->avdd_mv = ret / 1000;
 
 	ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulator_names),
 					     regulator_names);