diff mbox series

[2/2] wifi: rtl8xxxu: Add LED control code for RTL8192CU family

Message ID 4b5970cf-d28b-415a-b911-82cdb5e9ce99@gmail.com
State New
Headers show
Series [1/2] wifi: rtl8xxxu: Add separate MAC init table for RTL8192CU | expand

Commit Message

Bitterblue Smith April 18, 2024, 10:03 p.m. UTC
Also, don't set bit 7 of LEDCFG2 for RTL8192CU. If bit 7 is set the LED
never turns on. In this family only RTL8188CUS needs bit 7 of LEDCFG2
set.

Software control (on/off) and hardware control (automatic blinking)
tested with Netcore NW362 (RTL8192CU).

Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
---
 .../realtek/rtl8xxxu/rtl8xxxu_8192c.c         | 21 +++++++++++++++++++
 .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c |  2 +-
 2 files changed, 22 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
index e54978ca7171..ddf2d9707338 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192c.c
@@ -609,6 +609,26 @@  static int rtl8192cu_power_on(struct rtl8xxxu_priv *priv)
 	return 0;
 }
 
+static int rtl8192cu_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	struct rtl8xxxu_priv *priv = container_of(led_cdev,
+						  struct rtl8xxxu_priv,
+						  led_cdev);
+	u8 ledcfg = rtl8xxxu_read8(priv, REG_LEDCFG0);
+
+	if (brightness == LED_OFF)
+		ledcfg = LEDCFG2_SW_LED_CONTROL | LEDCFG2_SW_LED_DISABLE;
+	else if (brightness == LED_ON)
+		ledcfg = LEDCFG2_SW_LED_CONTROL;
+	else if (brightness == RTL8XXXU_HW_LED_CONTROL)
+		ledcfg = LEDCFG2_HW_LED_CONTROL | LEDCFG2_HW_LED_ENABLE;
+
+	rtl8xxxu_write8(priv, REG_LEDCFG0, ledcfg);
+
+	return 0;
+}
+
 struct rtl8xxxu_fileops rtl8192cu_fops = {
 	.identify_chip = rtl8192cu_identify_chip,
 	.parse_efuse = rtl8192cu_parse_efuse,
@@ -635,6 +655,7 @@  struct rtl8xxxu_fileops rtl8192cu_fops = {
 	.report_rssi = rtl8xxxu_gen1_report_rssi,
 	.fill_txdesc = rtl8xxxu_fill_txdesc_v1,
 	.cck_rssi = rtl8723a_cck_rssi,
+	.led_classdev_brightness_set = rtl8192cu_led_brightness_set,
 	.writeN_block_size = 128,
 	.rx_agg_buf_size = 16000,
 	.tx_desc_size = sizeof(struct rtl8xxxu_txdesc32),
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 82037a1f3dfc..7345a893e1fa 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4360,7 +4360,7 @@  static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 
 	/* Let the 8051 take control of antenna setting */
 	if (priv->rtl_chip != RTL8192E && priv->rtl_chip != RTL8188F &&
-	    priv->rtl_chip != RTL8710B) {
+	    priv->rtl_chip != RTL8710B && priv->rtl_chip != RTL8192C) {
 		val8 = rtl8xxxu_read8(priv, REG_LEDCFG2);
 		val8 |= LEDCFG2_DPDT_SELECT;
 		rtl8xxxu_write8(priv, REG_LEDCFG2, val8);