diff mbox series

[02/18] xhci: remove xhci_check_usb2_port_capability helper

Message ID 20240429140245.3955523-3-mathias.nyman@linux.intel.com
State New
Headers show
Series xhci cleanups and rework for usb-next | expand

Commit Message

Mathias Nyman April 29, 2024, 2:02 p.m. UTC
This helper was only called from one function.
Removing it both reduces lines of code and made it more readable.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.c | 29 ++++++++---------------------
 1 file changed, 8 insertions(+), 21 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 7f07672d4110..37eb37b0affa 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4507,26 +4507,13 @@  static int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
 	return 0;
 }
 
-/* check if a usb2 port supports a given extened capability protocol
- * only USB2 ports extended protocol capability values are cached.
- * Return 1 if capability is supported
- */
-static bool xhci_check_usb2_port_capability(struct xhci_hcd *xhci, int portnum,
-					   unsigned capability)
-{
-	struct xhci_port *port;
-
-	port = xhci->usb2_rhub.ports[portnum];
-
-	return !!(port->port_cap->protocol_caps & capability);
-}
-
 static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
 {
 	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
-	int		portnum = udev->portnum - 1;
+	struct xhci_port *port;
+	u32 capability;
 
-	if (hcd->speed >= HCD_USB3 || !udev->lpm_capable)
+	if (hcd->speed >= HCD_USB3 || !udev->lpm_capable || !xhci->hw_lpm_support)
 		return 0;
 
 	/* we only support lpm for non-hub device connected to root hub yet */
@@ -4534,14 +4521,14 @@  static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev)
 			udev->descriptor.bDeviceClass == USB_CLASS_HUB)
 		return 0;
 
-	if (xhci->hw_lpm_support == 1 &&
-			xhci_check_usb2_port_capability(
-				xhci, portnum, XHCI_HLC)) {
+	port = xhci->usb2_rhub.ports[udev->portnum - 1];
+	capability = port->port_cap->protocol_caps;
+
+	if (capability & XHCI_HLC) {
 		udev->usb2_hw_lpm_capable = 1;
 		udev->l1_params.timeout = XHCI_L1_TIMEOUT;
 		udev->l1_params.besl = XHCI_DEFAULT_BESL;
-		if (xhci_check_usb2_port_capability(xhci, portnum,
-					XHCI_BLC))
+		if (capability & XHCI_BLC)
 			udev->usb2_hw_lpm_besl_capable = 1;
 	}