diff mbox series

gpiolib: cdev: fix uninitialised kfifo

Message ID 20240510065342.36191-1-warthog618@gmail.com
State New
Headers show
Series gpiolib: cdev: fix uninitialised kfifo | expand

Commit Message

Kent Gibson May 10, 2024, 6:53 a.m. UTC
If a line is requested with debounce, and that results in debouncing
in software, and the line is subsequently reconfigured to enable edge
detection then the allocation of the kfifo to contain edge events is
overlooked.  This results in events being written to and read from an
unitialised kfifo.  Read events are returned to userspace.

Initialise the kfifo in the case where the software debounce is
already active.

Fixes: 65cff7046406 ("gpiolib: cdev: support setting debounce")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
---
 drivers/gpio/gpiolib-cdev.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Bartosz Golaszewski May 14, 2024, 6:56 a.m. UTC | #1
On Tue, 14 May 2024 at 05:37, Kent Gibson <warthog618@gmail.com> wrote:
>
> On Fri, May 10, 2024 at 04:06:16PM +0200, Bartosz Golaszewski wrote:
> > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> >
> >
> > On Fri, 10 May 2024 14:53:42 +0800, Kent Gibson wrote:
> > > If a line is requested with debounce, and that results in debouncing
> > > in software, and the line is subsequently reconfigured to enable edge
> > > detection then the allocation of the kfifo to contain edge events is
> > > overlooked.  This results in events being written to and read from an
> > > unitialised kfifo.  Read events are returned to userspace.
> > >
> > > Initialise the kfifo in the case where the software debounce is
> > > already active.
> > >
> > > [...]
> >
> > Applied, thanks!
> >
> > [1/1] gpiolib: cdev: fix uninitialised kfifo
> >       commit: 3c1625fe5a2e0d68cd7b68156f02c1b5de09a161
> >
>
> I've got a patch series to tidy this up and catch any similar errors
> earlier going forward.
> It is of course based on this patch, but that isn't in gpio/for-next yet.
> How should I proceed?
>
> Cheers,
> Kent.

Pull in current master into gpio/for-next, apply your series, make
sure it works and then wait until v6.10-rc1 is tagged because I won't
be picking up anything during merge window.

Bart
diff mbox series

Patch

diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c
index d09c7d728365..57c92395219e 100644
--- a/drivers/gpio/gpiolib-cdev.c
+++ b/drivers/gpio/gpiolib-cdev.c
@@ -1193,6 +1193,8 @@  static int edge_detector_update(struct line *line,
 				struct gpio_v2_line_config *lc,
 				unsigned int line_idx, u64 edflags)
 {
+	u64 eflags;
+	int ret;
 	u64 active_edflags = READ_ONCE(line->edflags);
 	unsigned int debounce_period_us =
 			gpio_v2_line_config_debounce_period(lc, line_idx);
@@ -1204,6 +1206,18 @@  static int edge_detector_update(struct line *line,
 	/* sw debounced and still will be...*/
 	if (debounce_period_us && READ_ONCE(line->sw_debounced)) {
 		line_set_debounce_period(line, debounce_period_us);
+		/*
+		 * ensure event fifo is initialised if edge detection
+		 * is now enabled.
+		 */
+		eflags = edflags & GPIO_V2_LINE_EDGE_FLAGS;
+		if (eflags && !kfifo_initialized(&line->req->events)) {
+			ret = kfifo_alloc(&line->req->events,
+					  line->req->event_buffer_size,
+					  GFP_KERNEL);
+			if (ret)
+				return ret;
+		}
 		return 0;
 	}