| Message ID | 20240425213701.655540-1-eajames@linux.ibm.com |
|---|---|
| Headers | show |
| Series | ARM: dts: aspeed: Add IBM P11 BMC Boards | expand |
On Thu, 25 Apr 2024 16:36:53 -0500, Eddie James wrote: > Since there are multiple FSI controllers documented, the common > properties should be documented separately and then referenced > from the specific controller documentation. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > --- > .../bindings/fsi/fsi-controller.yaml | 65 +++++++++++++++++++ > 1 file changed, 65 insertions(+) > create mode 100644 Documentation/devicetree/bindings/fsi/fsi-controller.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/fsi/fsi-controller.example.dtb: /example-0/fsi@3400: failed to match any schema with compatible: ['fsi-controller'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240425213701.655540-7-eajames@linux.ibm.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 25/04/2024 23:36, Eddie James wrote: > The FSI2PIB or SCOM engine provides an interface to the POWER processor > PIB (Pervasive Interconnect Bus). > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > --- > .../devicetree/bindings/fsi/ibm,fsi2pib.yaml | 38 +++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml > > diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml > new file mode 100644 > index 000000000000..4d557150c2e3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml > @@ -0,0 +1,38 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/fsi/ibm,fsi2pib.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: IBM FSI-attached SCOM engine > + > +maintainers: > + - Eddie James <eajames@linux.ibm.com> > + > +description: > + The SCOM engine is an interface to the POWER processor PIB (Pervasive > + Interconnect Bus). This node will always be a child of an FSI CFAM node; > + see fsi.txt for details on FSI slave and CFAM nodes. > + > +properties: > + compatible: > + enum: > + - ibm,fsi2pib > + - ibm,i2cr-scom Sometimes you call these p9, sometimes p10... what is the system or SoC here? Aren't you adding some generic compatibles? writing-bindings and numerous guides are clear on that. Best regards, Krzysztof
On 25/04/2024 23:36, Eddie James wrote: > The SBEFIFO engine provides an interface to the POWER processor > Self Boot Engine (SBE). > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > Acked-by: Conor Dooley <conor.dooley@microchip.com> > Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> > --- > +description: > + The SBEFIFO is an FSI CFAM engine that provides an interface to the > + POWER processor Self Boot Engine (SBE). This node will always be a child > + of an FSI CFAM node; see fsi.txt for details on FSI slave and CFAM > + nodes. > + > +properties: > + compatible: > + enum: > + - ibm,p9-sbefifo > + - ibm,odyssey-sbefifo > + > + reg: > + items: > + - description: FSI slave address > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +patternProperties: > + "^occ(@.*)?": Why unit address is optional? Best regards, Krzysztof
On 25/04/2024 23:36, Eddie James wrote: > Switch to yaml for the FSI-attached I2C controller. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC (and consider --no-git-fallback argument). It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel. Tools like b4 or scripts/get_maintainer.pl provide you proper list of people, so fix your workflow. Tools might also fail if you work on some ancient tree (don't, instead use mainline), work on fork of kernel (don't, instead use mainline) or you ignore some maintainers (really don't). Just use b4 and everything should be fine, although remember about `b4 prep --auto-to-cc` if you added new patches to the patchset. > --- > .../devicetree/bindings/i2c/i2c-fsi.txt | 40 ------------- > .../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 59 +++++++++++++++++++ > 2 files changed, 59 insertions(+), 40 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt > create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml > > - }; > diff --git a/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml > new file mode 100644 > index 000000000000..473a45de1b6c > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml > @@ -0,0 +1,59 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/i2c/ibm,i2c-fsi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: IBM FSI-attached I2C controller > + > +maintainers: > + - Eddie James <eajames@linux.ibm.com> > + > +description: > + This I2C controller is an FSI CFAM engine, providing access to a number of > + I2C busses. Therefore this node will always be a child of an FSI CFAM node; > + see fsi.txt for details on FSI slave and CFAM nodes. Here and in all other schemas - remove reference to fsi.txt. You are going to drop this file once you convert everything, right? > + > +properties: > + compatible: > + enum: > + - ibm,i2c-fsi > + > + reg: > + items: > + - description: FSI slave address > + > +required: > + - compatible > + - reg > + > +allOf: > + - $ref: /schemas/i2c/i2c-controller.yaml# > + > +unevaluatedProperties: false > + > +examples: > + - | > + i2c@1800 { So no wrapper node is needed. Drop the wrapper node in previous patchset where you introduced one with warning. Best regards, Krzysztof
On 25/04/2024 23:37, Eddie James wrote: > Add the device tree for the new BMC system. The Blueridge is a > P11 system with four processors. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > --- > .../dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 1711 +++++++++++++++++ > 1 file changed, 1711 insertions(+) > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts > > diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts > new file mode 100644 > index 000000000000..8503ce2480b5 > --- /dev/null > +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts > @@ -0,0 +1,1711 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +// Copyright 2024 IBM Corp. > +/dts-v1/; > + > +#include "aspeed-g6.dtsi" > +#include <dt-bindings/gpio/aspeed-gpio.h> > +#include <dt-bindings/i2c/i2c.h> > +#include <dt-bindings/leds/leds-pca955x.h> > + > +/ { > + model = "Blueridge"; > + compatible = "ibm,blueridge-bmc", "aspeed,ast2600"; > + > + aliases { > + serial4 = &uart5; > + i2c16 = &i2c2mux0; > + i2c17 = &i2c2mux1; > + i2c18 = &i2c2mux2; > + i2c19 = &i2c2mux3; > + i2c20 = &i2c4mux0chn0; > + i2c21 = &i2c4mux0chn1; > + i2c22 = &i2c4mux0chn2; > + i2c23 = &i2c5mux0chn0; > + i2c24 = &i2c5mux0chn1; > + i2c25 = &i2c6mux0chn0; > + i2c26 = &i2c6mux0chn1; > + i2c27 = &i2c6mux0chn2; > + i2c28 = &i2c6mux0chn3; > + i2c29 = &i2c11mux0chn0; > + i2c30 = &i2c11mux0chn1; > + }; > + > + chosen { > + stdout-path = &uart5; > + bootargs = "console=ttyS4,115200n8 earlycon"; Drop bootargs. ALWAYS. > + }; > + > + memory@80000000 { > + device_type = "memory"; > + reg = <0x80000000 0x40000000>; > + }; > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + event_log: tcg_event_log@b3d00000 { No underscores. Didn't you already received such basic review? > + no-map; > + reg = <0xb3d00000 0x100000>; > + }; > + > + ramoops@b3e00000 { > + compatible = "ramoops"; > + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ > + record-size = <0x8000>; > + console-size = <0x8000>; > + ftrace-size = <0x8000>; > + pmsg-size = <0x8000>; > + max-reason = <3>; /* KMSG_DUMP_EMERG */ > + }; > + > + /* LPC FW cycle bridge region requires natural alignment */ > + flash_memory: region@b4000000 { > + no-map; > + reg = <0xb4000000 0x04000000>; /* 64M */ > + }; > + > + /* VGA region is dictated by hardware strapping */ > + vga_memory: region@bf000000 { > + no-map; > + compatible = "shared-dma-pool"; > + reg = <0xbf000000 0x01000000>; /* 16M */ > + }; > + }; > + > + i2c2mux: i2cmux { > + compatible = "i2c-mux-gpio"; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; ??? Drop > + > + i2c-parent = <&i2c2>; > + mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>, > + <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>; > + idle-state = <0>; > + > + i2c2mux0: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + }; > + > + i2c2mux1: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + }; > + > + i2c2mux2: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + }; > + > + i2c2mux3: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <3>; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + /* BMC Card fault LED at the back */ > + led-bmc-ingraham0 { > + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; > + }; > + > + /* Enclosure ID LED at the back */ > + led-rear-enc-id0 { > + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; > + }; > + > + /* Enclosure fault LED at the back */ > + led-rear-enc-fault0 { > + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; > + }; > + > + /* PCIE slot power LED */ > + led-pcieslot-power { > + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; > + }; > + }; > + > + gpio-keys-polled { > + compatible = "gpio-keys-polled"; > + poll-interval = <1000>; > + > + event-fan0-presence { > + label = "fan0-presence"; > + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; > + linux,code = <6>; > + }; > + > + event-fan1-presence { > + label = "fan1-presence"; > + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; > + linux,code = <7>; > + }; > + > + event-fan2-presence { > + label = "fan2-presence"; > + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; > + linux,code = <8>; > + }; > + > + event-fan3-presence { > + label = "fan3-presence"; > + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; > + linux,code = <9>; > + }; > + > + event-fan4-presence { > + label = "fan4-presence"; > + gpios = <&pca0 10 GPIO_ACTIVE_LOW>; > + linux,code = <10>; > + }; > + > + event-fan5-presence { > + label = "fan5-presence"; > + gpios = <&pca0 11 GPIO_ACTIVE_LOW>; > + linux,code = <11>; > + }; > + }; > + > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&adc1 7>; > + }; > +}; > + > +&adc1 { > + status = "okay"; > + aspeed,int-vref-microvolt = <2500000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default > + &pinctrl_adc10_default &pinctrl_adc11_default > + &pinctrl_adc12_default &pinctrl_adc13_default > + &pinctrl_adc14_default &pinctrl_adc15_default>; > +}; > + > +&ehci1 { > + status = "okay"; > +}; > + > +&uhci { > + status = "okay"; > +}; > + > +&gpio0 { > + gpio-line-names = > + /*A0-A7*/ "","","","","","","","", > + /*B0-B7*/ "","","","","","","checkstop","", > + /*C0-C7*/ "","","","","","","","", > + /*D0-D7*/ "","","","","","","","", > + /*E0-E7*/ "","","","","","","","", > + /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","", > + /*G0-G7*/ "","","","","","","","", > + /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","", > + /*I0-I7*/ "","","","","","","bmc-secure-boot","", > + /*J0-J7*/ "","","","","","","","", > + /*K0-K7*/ "","","","","","","","", > + /*L0-L7*/ "","","","","","","","", > + /*M0-M7*/ "","","","","","","","", > + /*N0-N7*/ "","","","","","","","", > + /*O0-O7*/ "","","","usb-power","","","","", > + /*P0-P7*/ "","","","","pcieslot-power","","","", > + /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", > + /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", > + /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", > + "power-ffs-sync-history","","","", > + /*T0-T7*/ "","","","","","","","", > + /*U0-U7*/ "","","","","","","","", > + /*V0-V7*/ "","","","","","","","", > + /*W0-W7*/ "","","","","","","","", > + /*X0-X7*/ "","","","","","","","", > + /*Y0-Y7*/ "","","","","","","","", > + /*Z0-Z7*/ "","","","","","","",""; > + > + i2c3_mux_oe_n-hog { > + gpio-hog; > + gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>; > + output-high; > + line-name = "I2C3_MUX_OE_N"; > + }; > + > + usb_power-hog { > + gpio-hog; > + gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>; > + output-high; > + }; > +}; > + > +&emmc_controller { > + status = "okay"; > +}; > + > +&pinctrl_emmc_default { > + bias-disable; > +}; > + > +&emmc { > + status = "okay"; > + clk-phase-mmc-hs200 = <180>, <180>; > +}; > + > +&ibt { > + status = "okay"; > +}; > + > +&i2c0 { > + status = "okay"; > + > + eeprom@51 { > + compatible = "atmel,24c64"; > + reg = <0x51>; > + }; > + > + tca_pres1: tca9554@20{ Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation Also missing space before { > + compatible = "ti,tca9554"; > + reg = <0x20>; > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio-line-names = "", > + "RUSSEL_FW_I2C_ENABLE_N", > + "RUSSEL_OPPANEL_PRESENCE_N", > + "BLYTH_OPPANEL_PRESENCE_N", > + "CPU_TPM_CARD_PRESENT_N", > + "DASD_BP2_PRESENT_N", > + "DASD_BP1_PRESENT_N", > + "DASD_BP0_PRESENT_N"; > + }; > +}; > + > +&i2c1 { > + status = "okay"; > +}; > + > +&i2c2 { > + status = "okay"; > +}; > + > +&i2c3 { > + status = "okay"; > + > + power-supply@68 { > + compatible = "ibm,cffps"; > + reg = <0x68>; > + }; > + > + power-supply@69 { > + compatible = "ibm,cffps"; > + reg = <0x69>; > + }; > + > + pca_pres1: pca9552@61 { Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + compatible = "nxp,pca9552"; > + reg = <0x61>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + gpio-line-names = > + "SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD", > + "SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD", > + "SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N", > + "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N", > + "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N", > + "", "", "", "", "", ""; > + }; > +}; > + > +&i2c4 { > + status = "okay"; > + > + tmp275@48 { Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + compatible = "ti,tmp275"; > + reg = <0x48>; > + }; > + > + tmp275@49 { So it's everywhere... > + compatible = "ti,tmp275"; > + reg = <0x49>; > + }; > + > + tmp275@4a { > + compatible = "ti,tmp275"; > + reg = <0x4a>; > + }; > + > + i2c-mux@70 { > + compatible = "nxp,pca9546"; > + reg = <0x70>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; Why? Drop > + i2c-mux-idle-disconnect; > + > + i2c4mux0chn0: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + }; > + > + pca9551@60 { Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + compatible = "nxp,pca9551"; > + reg = <0x60>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + led@0 { > + label = "cablecard0-cxp-top"; > + reg = <0>; > + retain-state-shutdown; > + default-state = "keep"; > + type = <PCA955X_TYPE_LED>; > + }; > + > + led@1 { > + label = "cablecard0-cxp-bot"; > + reg = <1>; > + retain-state-shutdown; > + default-state = "keep"; > + type = <PCA955X_TYPE_LED>; > + }; > + }; > + }; > + > + i2c4mux0chn1: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; reg is after compatible, which means if there is no compatible, reg is always first. This applies you all your DTS patches. This patchset and future. > + > + eeprom@51 { > + compatible = "atmel,24c64"; > + reg = <0x51>; > + }; > + }; > + > + i2c4mux0chn2: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <2>; > + > + eeprom@52 { > + compatible = "atmel,24c64"; > + reg = <0x52>; > + }; > + }; > + }; > +}; > + > +&i2c5 { > + status = "okay"; > + > + tmp275@48 { Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + compatible = "ti,tmp275"; > + reg = <0x48>; > + }; > + > + tmp275@49 { > + compatible = "ti,tmp275"; > + reg = <0x49>; > + }; > + > + i2c-mux@70 { > + compatible = "nxp,pca9546"; > + reg = <0x70>; > + #address-cells = <1>; > + #size-cells = <0>; > + status = "okay"; Drop > + i2c-mux-idle-disconnect; > + > + i2c5mux0chn0: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + eeprom@50 { > + compatible = "atmel,24c64"; > + reg = <0x50>; > + }; > + > + pca9551@60 { > + compatible = "nxp,pca9551"; > + reg = <0x60>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio-controller; > + #gpio-cells = <2>; > + > + led@0 { > + label = "cablecard3-cxp-top"; > + reg = <0>; > + retain-state-shutdown; > + default-state = "keep"; > + type = <PCA955X_TYPE_LED>; > + }; > + > + led@1 { > + label = "cablecard3-cxp-bot"; > + reg = <1>; > + retain-state-shutdown; > + default-state = "keep"; > + type = <PCA955X_TYPE_LED>; > + }; > + }; > + }; > + > + i2c5mux0chn1: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <1>; > + > + eeprom@51 { > + compatible = "atmel,24c64"; > + reg = <0x51>; > + }; > + > + pca9551@61 { > + compatible = "nxp,pca9551"; > + reg = <0x61>; > + #address-cells = <1>; > + #size-cells = <0>; And here you have correct order of properties... Best regards, Krzysztof
On 4/26/24 01:35, Krzysztof Kozlowski wrote: > On 25/04/2024 23:37, Eddie James wrote: >> Add the device tree for the new BMC system. The Blueridge is a >> P11 system with four processors. >> >> Signed-off-by: Eddie James <eajames@linux.ibm.com> >> --- >> .../dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 1711 +++++++++++++++++ >> 1 file changed, 1711 insertions(+) >> create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts >> >> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts >> new file mode 100644 >> index 000000000000..8503ce2480b5 >> --- /dev/null >> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts >> @@ -0,0 +1,1711 @@ >> +// SPDX-License-Identifier: GPL-2.0-or-later >> +// Copyright 2024 IBM Corp. >> +/dts-v1/; >> + >> +#include "aspeed-g6.dtsi" >> +#include <dt-bindings/gpio/aspeed-gpio.h> >> +#include <dt-bindings/i2c/i2c.h> >> +#include <dt-bindings/leds/leds-pca955x.h> >> + >> +/ { >> + model = "Blueridge"; >> + compatible = "ibm,blueridge-bmc", "aspeed,ast2600"; >> + >> + aliases { >> + serial4 = &uart5; >> + i2c16 = &i2c2mux0; >> + i2c17 = &i2c2mux1; >> + i2c18 = &i2c2mux2; >> + i2c19 = &i2c2mux3; >> + i2c20 = &i2c4mux0chn0; >> + i2c21 = &i2c4mux0chn1; >> + i2c22 = &i2c4mux0chn2; >> + i2c23 = &i2c5mux0chn0; >> + i2c24 = &i2c5mux0chn1; >> + i2c25 = &i2c6mux0chn0; >> + i2c26 = &i2c6mux0chn1; >> + i2c27 = &i2c6mux0chn2; >> + i2c28 = &i2c6mux0chn3; >> + i2c29 = &i2c11mux0chn0; >> + i2c30 = &i2c11mux0chn1; >> + }; >> + >> + chosen { >> + stdout-path = &uart5; >> + bootargs = "console=ttyS4,115200n8 earlycon"; > Drop bootargs. ALWAYS. > > >> + }; >> + >> + memory@80000000 { >> + device_type = "memory"; >> + reg = <0x80000000 0x40000000>; >> + }; >> + >> + reserved-memory { >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + >> + event_log: tcg_event_log@b3d00000 { > No underscores. > > Didn't you already received such basic review? Thanks for your detailed review Krzysztof. These device trees are based off 5 year old device trees that were merged when the rules were much less strict. I will attempt to address all of your comments for these new dts. Thanks, Eddie > > >> + no-map; >> + reg = <0xb3d00000 0x100000>; >> + }; >> + >> + ramoops@b3e00000 { >> + compatible = "ramoops"; >> + reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */ >> + record-size = <0x8000>; >> + console-size = <0x8000>; >> + ftrace-size = <0x8000>; >> + pmsg-size = <0x8000>; >> + max-reason = <3>; /* KMSG_DUMP_EMERG */ >> + }; >> + >> + /* LPC FW cycle bridge region requires natural alignment */ >> + flash_memory: region@b4000000 { >> + no-map; >> + reg = <0xb4000000 0x04000000>; /* 64M */ >> + }; >> + >> + /* VGA region is dictated by hardware strapping */ >> + vga_memory: region@bf000000 { >> + no-map; >> + compatible = "shared-dma-pool"; >> + reg = <0xbf000000 0x01000000>; /* 16M */ >> + }; >> + }; >> + >> + i2c2mux: i2cmux { >> + compatible = "i2c-mux-gpio"; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "okay"; > ??? Drop > > >> + >> + i2c-parent = <&i2c2>; >> + mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>, >> + <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>; >> + idle-state = <0>; >> + >> + i2c2mux0: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + }; >> + >> + i2c2mux1: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; >> + }; >> + >> + i2c2mux2: i2c@2 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <2>; >> + }; >> + >> + i2c2mux3: i2c@3 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <3>; >> + }; >> + }; >> + >> + leds { >> + compatible = "gpio-leds"; >> + >> + /* BMC Card fault LED at the back */ >> + led-bmc-ingraham0 { >> + gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>; >> + }; >> + >> + /* Enclosure ID LED at the back */ >> + led-rear-enc-id0 { >> + gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>; >> + }; >> + >> + /* Enclosure fault LED at the back */ >> + led-rear-enc-fault0 { >> + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; >> + }; >> + >> + /* PCIE slot power LED */ >> + led-pcieslot-power { >> + gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>; >> + }; >> + }; >> + >> + gpio-keys-polled { >> + compatible = "gpio-keys-polled"; >> + poll-interval = <1000>; >> + >> + event-fan0-presence { >> + label = "fan0-presence"; >> + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; >> + linux,code = <6>; >> + }; >> + >> + event-fan1-presence { >> + label = "fan1-presence"; >> + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; >> + linux,code = <7>; >> + }; >> + >> + event-fan2-presence { >> + label = "fan2-presence"; >> + gpios = <&pca0 8 GPIO_ACTIVE_LOW>; >> + linux,code = <8>; >> + }; >> + >> + event-fan3-presence { >> + label = "fan3-presence"; >> + gpios = <&pca0 9 GPIO_ACTIVE_LOW>; >> + linux,code = <9>; >> + }; >> + >> + event-fan4-presence { >> + label = "fan4-presence"; >> + gpios = <&pca0 10 GPIO_ACTIVE_LOW>; >> + linux,code = <10>; >> + }; >> + >> + event-fan5-presence { >> + label = "fan5-presence"; >> + gpios = <&pca0 11 GPIO_ACTIVE_LOW>; >> + linux,code = <11>; >> + }; >> + }; >> + >> + iio-hwmon { >> + compatible = "iio-hwmon"; >> + io-channels = <&adc1 7>; >> + }; >> +}; >> + >> +&adc1 { >> + status = "okay"; >> + aspeed,int-vref-microvolt = <2500000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default >> + &pinctrl_adc10_default &pinctrl_adc11_default >> + &pinctrl_adc12_default &pinctrl_adc13_default >> + &pinctrl_adc14_default &pinctrl_adc15_default>; >> +}; >> + >> +&ehci1 { >> + status = "okay"; >> +}; >> + >> +&uhci { >> + status = "okay"; >> +}; >> + >> +&gpio0 { >> + gpio-line-names = >> + /*A0-A7*/ "","","","","","","","", >> + /*B0-B7*/ "","","","","","","checkstop","", >> + /*C0-C7*/ "","","","","","","","", >> + /*D0-D7*/ "","","","","","","","", >> + /*E0-E7*/ "","","","","","","","", >> + /*F0-F7*/ "","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","", >> + /*G0-G7*/ "","","","","","","","", >> + /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","", >> + /*I0-I7*/ "","","","","","","bmc-secure-boot","", >> + /*J0-J7*/ "","","","","","","","", >> + /*K0-K7*/ "","","","","","","","", >> + /*L0-L7*/ "","","","","","","","", >> + /*M0-M7*/ "","","","","","","","", >> + /*N0-N7*/ "","","","","","","","", >> + /*O0-O7*/ "","","","usb-power","","","","", >> + /*P0-P7*/ "","","","","pcieslot-power","","","", >> + /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","", >> + /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","", >> + /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3", >> + "power-ffs-sync-history","","","", >> + /*T0-T7*/ "","","","","","","","", >> + /*U0-U7*/ "","","","","","","","", >> + /*V0-V7*/ "","","","","","","","", >> + /*W0-W7*/ "","","","","","","","", >> + /*X0-X7*/ "","","","","","","","", >> + /*Y0-Y7*/ "","","","","","","","", >> + /*Z0-Z7*/ "","","","","","","",""; >> + >> + i2c3_mux_oe_n-hog { >> + gpio-hog; >> + gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>; >> + output-high; >> + line-name = "I2C3_MUX_OE_N"; >> + }; >> + >> + usb_power-hog { >> + gpio-hog; >> + gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>; >> + output-high; >> + }; >> +}; >> + >> +&emmc_controller { >> + status = "okay"; >> +}; >> + >> +&pinctrl_emmc_default { >> + bias-disable; >> +}; >> + >> +&emmc { >> + status = "okay"; >> + clk-phase-mmc-hs200 = <180>, <180>; >> +}; >> + >> +&ibt { >> + status = "okay"; >> +}; >> + >> +&i2c0 { >> + status = "okay"; >> + >> + eeprom@51 { >> + compatible = "atmel,24c64"; >> + reg = <0x51>; >> + }; >> + >> + tca_pres1: tca9554@20{ > Node names should be generic. See also an explanation and list of > examples (not exhaustive) in DT specification: > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > > Also missing space before { > > >> + compatible = "ti,tca9554"; >> + reg = <0x20>; >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + gpio-line-names = "", >> + "RUSSEL_FW_I2C_ENABLE_N", >> + "RUSSEL_OPPANEL_PRESENCE_N", >> + "BLYTH_OPPANEL_PRESENCE_N", >> + "CPU_TPM_CARD_PRESENT_N", >> + "DASD_BP2_PRESENT_N", >> + "DASD_BP1_PRESENT_N", >> + "DASD_BP0_PRESENT_N"; >> + }; >> +}; >> + >> +&i2c1 { >> + status = "okay"; >> +}; >> + >> +&i2c2 { >> + status = "okay"; >> +}; >> + >> +&i2c3 { >> + status = "okay"; >> + >> + power-supply@68 { >> + compatible = "ibm,cffps"; >> + reg = <0x68>; >> + }; >> + >> + power-supply@69 { >> + compatible = "ibm,cffps"; >> + reg = <0x69>; >> + }; >> + >> + pca_pres1: pca9552@61 { > Node names should be generic. See also an explanation and list of > examples (not exhaustive) in DT specification: > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > > >> + compatible = "nxp,pca9552"; >> + reg = <0x61>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + gpio-line-names = >> + "SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD", >> + "SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD", >> + "SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N", >> + "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N", >> + "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N", >> + "", "", "", "", "", ""; >> + }; >> +}; >> + >> +&i2c4 { >> + status = "okay"; >> + >> + tmp275@48 { > Node names should be generic. See also an explanation and list of > examples (not exhaustive) in DT specification: > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > > > >> + compatible = "ti,tmp275"; >> + reg = <0x48>; >> + }; >> + >> + tmp275@49 { > So it's everywhere... > >> + compatible = "ti,tmp275"; >> + reg = <0x49>; >> + }; >> + >> + tmp275@4a { >> + compatible = "ti,tmp275"; >> + reg = <0x4a>; >> + }; >> + >> + i2c-mux@70 { >> + compatible = "nxp,pca9546"; >> + reg = <0x70>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "okay"; > Why? Drop > >> + i2c-mux-idle-disconnect; >> + >> + i2c4mux0chn0: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + >> + eeprom@50 { >> + compatible = "atmel,24c64"; >> + reg = <0x50>; >> + }; >> + >> + pca9551@60 { > Node names should be generic. See also an explanation and list of > examples (not exhaustive) in DT specification: > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > > >> + compatible = "nxp,pca9551"; >> + reg = <0x60>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + led@0 { >> + label = "cablecard0-cxp-top"; >> + reg = <0>; >> + retain-state-shutdown; >> + default-state = "keep"; >> + type = <PCA955X_TYPE_LED>; >> + }; >> + >> + led@1 { >> + label = "cablecard0-cxp-bot"; >> + reg = <1>; >> + retain-state-shutdown; >> + default-state = "keep"; >> + type = <PCA955X_TYPE_LED>; >> + }; >> + }; >> + }; >> + >> + i2c4mux0chn1: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; > reg is after compatible, which means if there is no compatible, reg is > always first. This applies you all your DTS patches. This patchset and > future. > > >> + >> + eeprom@51 { >> + compatible = "atmel,24c64"; >> + reg = <0x51>; >> + }; >> + }; >> + >> + i2c4mux0chn2: i2c@2 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <2>; >> + >> + eeprom@52 { >> + compatible = "atmel,24c64"; >> + reg = <0x52>; >> + }; >> + }; >> + }; >> +}; >> + >> +&i2c5 { >> + status = "okay"; >> + >> + tmp275@48 { > Node names should be generic. See also an explanation and list of > examples (not exhaustive) in DT specification: > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > > >> + compatible = "ti,tmp275"; >> + reg = <0x48>; >> + }; >> + >> + tmp275@49 { >> + compatible = "ti,tmp275"; >> + reg = <0x49>; >> + }; >> + >> + i2c-mux@70 { >> + compatible = "nxp,pca9546"; >> + reg = <0x70>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "okay"; > Drop > > >> + i2c-mux-idle-disconnect; >> + >> + i2c5mux0chn0: i2c@0 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <0>; >> + >> + eeprom@50 { >> + compatible = "atmel,24c64"; >> + reg = <0x50>; >> + }; >> + >> + pca9551@60 { >> + compatible = "nxp,pca9551"; >> + reg = <0x60>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + gpio-controller; >> + #gpio-cells = <2>; >> + >> + led@0 { >> + label = "cablecard3-cxp-top"; >> + reg = <0>; >> + retain-state-shutdown; >> + default-state = "keep"; >> + type = <PCA955X_TYPE_LED>; >> + }; >> + >> + led@1 { >> + label = "cablecard3-cxp-bot"; >> + reg = <1>; >> + retain-state-shutdown; >> + default-state = "keep"; >> + type = <PCA955X_TYPE_LED>; >> + }; >> + }; >> + }; >> + >> + i2c5mux0chn1: i2c@1 { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + reg = <1>; >> + >> + eeprom@51 { >> + compatible = "atmel,24c64"; >> + reg = <0x51>; >> + }; >> + >> + pca9551@61 { >> + compatible = "nxp,pca9551"; >> + reg = <0x61>; >> + #address-cells = <1>; >> + #size-cells = <0>; > > And here you have correct order of properties... > > > > Best regards, > Krzysztof >
On Thu, 25 Apr 2024 16:36:47 -0500, Eddie James wrote: > Add the Blueridge and Fuji BMC systems. Document many missing FSI related > properties, and fix existing warnings. > > Changes since v2: > - Split up the DTS patches > - Add documentation patches > > Eddie James (14): > dt-bindings: spi: Document the IBM Power SPI controller > dt-bindings: fsi: fsi2spi: Document SPI controller child nodes > dt-bindings: fsi: Document the FSI2PIB engine > dt-bindings: fsi: p9-occ: Switch to yaml format > dt-bindings: fsi: Document the IBM SBEFIFO engine > dt-bindings: fsi: Document the FSI controller common properties > dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller > dt-bindings: fsi: ast2600-fsi-master: Switch to yaml format > dt-bindings: fsi: Document the FSI Hub Controller > dt-bindings: i2c: i2c-fsi: Switch to yaml format > dt-bindings: arm: aspeed: add IBM P11 BMC boards > ARM: dts: aspeed: Add IBM P11 FSI devices > ARM: dts: aspeed: Add IBM P11 Blueridge BMC system > ARM: dts: aspeed: Add IBM P11 Fuji BMC system > > .../bindings/arm/aspeed/aspeed.yaml | 2 + > .../fsi/aspeed,ast2600-fsi-master.yaml | 72 + > .../bindings/fsi/fsi-controller.yaml | 65 + > .../bindings/fsi/fsi-master-aspeed.txt | 36 - > .../devicetree/bindings/fsi/ibm,fsi2pib.yaml | 38 + > .../devicetree/bindings/fsi/ibm,fsi2spi.yaml | 11 + > .../bindings/fsi/ibm,hub-fsi-controller.yaml | 44 + > .../bindings/fsi/ibm,i2cr-fsi-master.yaml | 5 +- > .../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 - > .../devicetree/bindings/fsi/ibm,p9-occ.yaml | 41 + > .../bindings/fsi/ibm,p9-sbefifo.yaml | 50 + > .../devicetree/bindings/i2c/i2c-fsi.txt | 40 - > .../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 59 + > .../devicetree/bindings/spi/ibm,p10-spi.yaml | 56 + > arch/arm/boot/dts/aspeed/Makefile | 2 + > .../dts/aspeed/aspeed-bmc-ibm-blueridge.dts | 1711 +++++++ > .../boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts | 3984 +++++++++++++++++ > .../arm/boot/dts/aspeed/ibm-power11-quad.dtsi | 1696 +++++++ > 18 files changed, 7835 insertions(+), 93 deletions(-) > create mode 100644 Documentation/devicetree/bindings/fsi/aspeed,ast2600-fsi-master.yaml > create mode 100644 Documentation/devicetree/bindings/fsi/fsi-controller.yaml > delete mode 100644 Documentation/devicetree/bindings/fsi/fsi-master-aspeed.txt > create mode 100644 Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml > create mode 100644 Documentation/devicetree/bindings/fsi/ibm,hub-fsi-controller.yaml > delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt > create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml > create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-sbefifo.yaml > delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt > create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml > create mode 100644 Documentation/devicetree/bindings/spi/ibm,p10-spi.yaml > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dts > create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dts > create mode 100644 arch/arm/boot/dts/aspeed/ibm-power11-quad.dtsi > > -- > 2.39.3 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y aspeed/aspeed-bmc-ibm-blueridge.dtb aspeed/aspeed-bmc-ibm-fuji.dtb' for 20240425213701.655540-1-eajames@linux.ibm.com: arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: timer: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/timer/arm,arch_timer.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /sdram@1e6e0000: failed to match any schema with compatible: ['aspeed,ast2600-sdram-edac', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: bus@1e600000: compatible: ['aspeed,ast2600-ahbc', 'syscon'] is too long from schema $id: http://devicetree.org/schemas/bus/aspeed,ast2600-ahbc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: ftgmac@1e660000: $nodename:0: 'ftgmac@1e660000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: ftgmac@1e680000: $nodename:0: 'ftgmac@1e680000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: ftgmac@1e670000: $nodename:0: 'ftgmac@1e670000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: ftgmac@1e670000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: ftgmac@1e690000: $nodename:0: 'ftgmac@1e690000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: ftgmac@1e690000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: ftgmac@1e660000: $nodename:0: 'ftgmac@1e660000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: ftgmac@1e680000: $nodename:0: 'ftgmac@1e680000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: ftgmac@1e670000: $nodename:0: 'ftgmac@1e670000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: ftgmac@1e670000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: ftgmac@1e690000: $nodename:0: 'ftgmac@1e690000' does not match '^ethernet(@.*)?$' from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: ftgmac@1e690000: Unevaluated properties are not allowed ('#address-cells', '#size-cells' were unexpected) from schema $id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: syscon@1e6e2000: pinctrl: 'oneOf' conditional failed, one must be fixed: 'aspeed,external-nodes' is a required property 'aspeed,ast2400-pinctrl' was expected 'aspeed,ast2500-pinctrl' was expected 'EMMC' is not one of ['ACPI', 'ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'DDCCLK', 'DDCDAT', 'EXTRST', 'FLACK', 'FLBUSY', 'FLWP', 'GPID', 'GPID0', 'GPID2', 'GPID4', 'GPID6', 'GPIE0', 'GPIE2', 'GPIE4', 'GPIE6', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'LPCPD', 'LPCPME', 'LPCRST', 'LPCSMI', 'MAC1LINK', 'MAC2LINK', 'MDIO1', 'MDIO2', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NDTS4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'OSCCLK', 'PWM0', 'PWM1', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'RGMII1', 'RGMII2', 'RMII1', 'RMII2', 'ROM16', 'ROM8', 'ROMCS1', 'ROMCS2', 'ROMCS3', 'ROMCS4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT2', 'SALT3', 'SALT4', 'SD1', 'SD2', 'SGPMCK', 'SGPMI', 'SGPMLD', 'SGPMO', 'SGPSCK', 'SGPSI0', 'SGPSI1', 'SGPSLD', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1DEBUG', 'SPI1PASSTHRU', 'SPICS1', 'TIMER3', 'TIMER4', 'TIMER5', 'TIMER6', 'TIMER7', 'TIMER8', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART6', 'USB11D1', 'USB11H2', 'USB2D1', 'USB2H1', 'USBCKI', 'VGABIOS_ROM', 'VGAHS', 'VGAVS', 'VPI18', 'VPI24', 'VPI30', 'VPO12', 'VPO24', 'WDTRST1', 'WDTRST2'] 'EMMC' is not one of ['ACPI', 'ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'DDCCLK', 'DDCDAT', 'ESPI', 'FWSPICS1', 'FWSPICS2', 'GPID0', 'GPID2', 'GPID4', 'GPID6', 'GPIE0', 'GPIE2', 'GPIE4', 'GPIE6', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'LAD0', 'LAD1', 'LAD2', 'LAD3', 'LCLK', 'LFRAME', 'LPCHC', 'LPCPD', 'LPCPLUS', 'LPCPME', 'LPCRST', 'LPCSMI', 'LSIRQ', 'MAC1LINK', 'MAC2LINK', 'MDIO1', 'MDIO2', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PNOR', 'PWM0', 'PWM1', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'RGMII1', 'RGMII2', 'RMII1', 'RMII2', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SCL1', 'SCL2', 'SD1', 'SD2', 'SDA1', 'SDA2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1CS1', 'SPI1DEBUG', 'SPI1PASSTHRU', 'SPI2CK', 'SPI2CS0', 'SPI2CS1', 'SPI2MISO', 'SPI2MOSI', 'TIMER3', 'TIMER4', 'TIMER5', 'TIMER6', 'TIMER7', 'TIMER8', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART6', 'USB11BHID', 'USB2AD', 'USB2AH', 'USB2BD', 'USB2BH', 'USBCKI', 'VGABIOSROM', 'VGAHS', 'VGAVS', 'VPI24', 'VPO', 'WDTRST1', 'WDTRST2'] ... from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: syscon@1e6e2000: 'smp-memram@180' does not match any of the regexes: '^interrupt-controller@[0-9a-f]+$', '^p2a-control@[0-9a-f]+$', '^pinctrl(@[0-9a-f]+)?$', '^silicon-id@[0-9a-f]+$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: pinctrl: usb11bhid_default:function:0: 'USB11BHID' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: pinctrl: i3c1_default:function:0: 'I3C1' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: pinctrl: i3c1_default:groups:0: 'I3C1' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMCG1', 'EMMCG4', 'EMMCG8', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'HVI3C3', 'HVI3C4', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10G0', 'PWM10G1', 'PWM11G0', 'PWM11G1', 'PWM12G0', 'PWM12G1', 'PWM13G0', 'PWM13G1', 'PWM14G0', 'PWM14G1', 'PWM15G0', 'PWM15G1', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8G0', 'PWM8G1', 'PWM9G0', 'PWM9G1', 'QSPI1', 'QSPI2', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10G0', 'SALT10G1', 'SALT11G0', 'SALT11G1', 'SALT12G0', 'SALT12G1', 'SALT13G0', 'SALT13G1', 'SALT14G0', 'SALT14G1', 'SALT15G0', 'SALT15G1', 'SALT16G0', 'SALT16G1', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9G0', 'SALT9G1', 'SD1', 'SD2', 'SD3', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12G0', 'UART12G1', 'UART13G0', 'UART13G1', 'UART6', 'UART7', 'UART8', 'UART9', 'USBA', 'USBB', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: pinctrl: i3c1_default:function:0: 'I3C1' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: pinctrl: i3c1_default:groups:0: 'I3C1' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMCG1', 'EMMCG4', 'EMMCG8', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'HVI3C3', 'HVI3C4', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10G0', 'PWM10G1', 'PWM11G0', 'PWM11G1', 'PWM12G0', 'PWM12G1', 'PWM13G0', 'PWM13G1', 'PWM14G0', 'PWM14G1', 'PWM15G0', 'PWM15G1', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8G0', 'PWM8G1', 'PWM9G0', 'PWM9G1', 'QSPI1', 'QSPI2', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10G0', 'SALT10G1', 'SALT11G0', 'SALT11G1', 'SALT12G0', 'SALT12G1', 'SALT13G0', 'SALT13G1', 'SALT14G0', 'SALT14G1', 'SALT15G0', 'SALT15G1', 'SALT16G0', 'SALT16G1', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9G0', 'SALT9G1', 'SD1', 'SD2', 'SD3', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12G0', 'UART12G1', 'UART13G0', 'UART13G1', 'UART6', 'UART7', 'UART8', 'UART9', 'USBA', 'USBB', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: pinctrl: i3c2_default:function:0: 'I3C2' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: pinctrl: i3c2_default:groups:0: 'I3C2' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMCG1', 'EMMCG4', 'EMMCG8', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'HVI3C3', 'HVI3C4', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10G0', 'PWM10G1', 'PWM11G0', 'PWM11G1', 'PWM12G0', 'PWM12G1', 'PWM13G0', 'PWM13G1', 'PWM14G0', 'PWM14G1', 'PWM15G0', 'PWM15G1', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8G0', 'PWM8G1', 'PWM9G0', 'PWM9G1', 'QSPI1', 'QSPI2', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10G0', 'SALT10G1', 'SALT11G0', 'SALT11G1', 'SALT12G0', 'SALT12G1', 'SALT13G0', 'SALT13G1', 'SALT14G0', 'SALT14G1', 'SALT15G0', 'SALT15G1', 'SALT16G0', 'SALT16G1', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9G0', 'SALT9G1', 'SD1', 'SD2', 'SD3', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12G0', 'UART12G1', 'UART13G0', 'UART13G1', 'UART6', 'UART7', 'UART8', 'UART9', 'USBA', 'USBB', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: pinctrl: usb2ad_default:function:0: 'USB2AD' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: pinctrl: i3c2_default:function:0: 'I3C2' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: pinctrl: i3c2_default:groups:0: 'I3C2' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMCG1', 'EMMCG4', 'EMMCG8', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'HVI3C3', 'HVI3C4', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10G0', 'PWM10G1', 'PWM11G0', 'PWM11G1', 'PWM12G0', 'PWM12G1', 'PWM13G0', 'PWM13G1', 'PWM14G0', 'PWM14G1', 'PWM15G0', 'PWM15G1', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8G0', 'PWM8G1', 'PWM9G0', 'PWM9G1', 'QSPI1', 'QSPI2', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10G0', 'SALT10G1', 'SALT11G0', 'SALT11G1', 'SALT12G0', 'SALT12G1', 'SALT13G0', 'SALT13G1', 'SALT14G0', 'SALT14G1', 'SALT15G0', 'SALT15G1', 'SALT16G0', 'SALT16G1', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9G0', 'SALT9G1', 'SD1', 'SD2', 'SD3', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12G0', 'UART12G1', 'UART13G0', 'UART13G1', 'UART6', 'UART7', 'UART8', 'UART9', 'USBA', 'USBB', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: pinctrl: usb2ad_default:function:0: 'USB2AD' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: pinctrl: usb11bhid_default:function:0: 'USB11BHID' is not one of ['ADC0', 'ADC1', 'ADC10', 'ADC11', 'ADC12', 'ADC13', 'ADC14', 'ADC15', 'ADC2', 'ADC3', 'ADC4', 'ADC5', 'ADC6', 'ADC7', 'ADC8', 'ADC9', 'BMCINT', 'EMMC', 'ESPI', 'ESPIALT', 'FSI1', 'FSI2', 'FWQSPI', 'FWSPIABR', 'FWSPID', 'FWSPIWP', 'GPIT0', 'GPIT1', 'GPIT2', 'GPIT3', 'GPIT4', 'GPIT5', 'GPIT6', 'GPIT7', 'GPIU0', 'GPIU1', 'GPIU2', 'GPIU3', 'GPIU4', 'GPIU5', 'GPIU6', 'GPIU7', 'I2C1', 'I2C10', 'I2C11', 'I2C12', 'I2C13', 'I2C14', 'I2C15', 'I2C16', 'I2C2', 'I2C3', 'I2C4', 'I2C5', 'I2C6', 'I2C7', 'I2C8', 'I2C9', 'I3C3', 'I3C4', 'I3C5', 'I3C6', 'JTAGM', 'LHPD', 'LHSIRQ', 'LPC', 'LPCHC', 'LPCPD', 'LPCPME', 'LPCSMI', 'LSIRQ', 'MACLINK1', 'MACLINK2', 'MACLINK3', 'MACLINK4', 'MDIO1', 'MDIO2', 'MDIO3', 'MDIO4', 'NCTS1', 'NCTS2', 'NCTS3', 'NCTS4', 'NDCD1', 'NDCD2', 'NDCD3', 'NDCD4', 'NDSR1', 'NDSR2', 'NDSR3', 'NDSR4', 'NDTR1', 'NDTR2', 'NDTR3', 'NDTR4', 'NRI1', 'NRI2', 'NRI3', 'NRI4', 'NRTS1', 'NRTS2', 'NRTS3', 'NRTS4', 'OSCCLK', 'PEWAKE', 'PWM0', 'PWM1', 'PWM10', 'PWM11', 'PWM12', 'PWM13', 'PWM14', 'PWM15', 'PWM2', 'PWM3', 'PWM4', 'PWM5', 'PWM6', 'PWM7', 'PWM8', 'PWM9', 'RGMII1', 'RGMII2', 'RGMII3', 'RGMII4', 'RMII1', 'RMII2', 'RMII3', 'RMII4', 'RXD1', 'RXD2', 'RXD3', 'RXD4', 'SALT1', 'SALT10', 'SALT11', 'SALT12', 'SALT13', 'SALT14', 'SALT15', 'SALT16', 'SALT2', 'SALT3', 'SALT4', 'SALT5', 'SALT6', 'SALT7', 'SALT8', 'SALT9', 'SD1', 'SD2', 'SGPM1', 'SGPM2', 'SGPS1', 'SGPS2', 'SIOONCTRL', 'SIOPBI', 'SIOPBO', 'SIOPWREQ', 'SIOPWRGD', 'SIOS3', 'SIOS5', 'SIOSCI', 'SPI1', 'SPI1ABR', 'SPI1CS1', 'SPI1WP', 'SPI2', 'SPI2CS1', 'SPI2CS2', 'TACH0', 'TACH1', 'TACH10', 'TACH11', 'TACH12', 'TACH13', 'TACH14', 'TACH15', 'TACH2', 'TACH3', 'TACH4', 'TACH5', 'TACH6', 'TACH7', 'TACH8', 'TACH9', 'THRU0', 'THRU1', 'THRU2', 'THRU3', 'TXD1', 'TXD2', 'TXD3', 'TXD4', 'UART10', 'UART11', 'UART12', 'UART13', 'UART6', 'UART7', 'UART8', 'UART9', 'USBAD', 'USBADP', 'USB2AH', 'USB2AHP', 'USB2BD', 'USB2BH', 'VB', 'VGAHS', 'VGAVS', 'WDTRST1', 'WDTRST2', 'WDTRST3', 'WDTRST4'] from schema $id: http://devicetree.org/schemas/pinctrl/aspeed,ast2600-pinctrl.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/xdma@1e6e7000: failed to match any schema with compatible: ['aspeed,ast2600-xdma'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/syscon@1e6e2000/smp-memram@180: failed to match any schema with compatible: ['aspeed,ast2600-smpmem'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@560: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic0'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/syscon@1e6e2000/interrupt-controller@570: failed to match any schema with compatible: ['aspeed,ast2600-scu-ic1'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/video@1e700000: failed to match any schema with compatible: ['aspeed,ast2600-video-engine'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: gpio@1e780000: 'i2c3_mux_oe_n-hog', 'usb_power-hog' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/display@1e6e6000: failed to match any schema with compatible: ['aspeed,ast2600-gfx', 'syscon'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: sgpiom@1e780500: '#interrupt-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/xdma@1e6e7000: failed to match any schema with compatible: ['aspeed,ast2600-xdma'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: adc@1e6e9000: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: sgpiom@1e780600: '#interrupt-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: adc@1e6e9100: 'interrupts' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: crypto@1e6fa000: 'aspeed,ahbc' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/crypto/aspeed,ast2600-acry.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/video@1e700000: failed to match any schema with compatible: ['aspeed,ast2600-video-engine'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: gpio@1e780000: 'usb_power-hog' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,ast2400-gpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: sgpiom@1e780500: '#interrupt-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: sgpiom@1e780600: '#interrupt-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: lpc@1e789000: reg-io-width: [[4]] is not of type 'object' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/timer@1e782000: failed to match any schema with compatible: ['aspeed,ast2600-timer'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: lpc@1e789000: lpc-snoop@80: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: lpc@1e789000: reg-io-width: [[4]] is not of type 'object' from schema $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: kcs@24: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: kcs@28: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: kcs@2c: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: kcs@114: 'clocks' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/lpc@1e789000/lhc@a0: failed to match any schema with compatible: ['aspeed,ast2600-lhc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/lpc@1e789000/ibt@140: failed to match any schema with compatible: ['aspeed,ast2600-ibt-bmc'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: sdc@1e740000: sdhci@1e740100:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: sdc@1e740000: sdhci@1e740200:compatible: ['aspeed,ast2600-sdhci', 'sdhci'] is too long from schema $id: http://devicetree.org/schemas/mmc/aspeed,sdhci.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740100: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/sdc@1e740000/sdhci@1e740200: failed to match any schema with compatible: ['aspeed,ast2600-sdhci', 'sdhci'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@200/pca9552@61: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@80/pca9552@62: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@280/i2c-mux@70/i2c@0/pca9551@60: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@280/pca9552@65: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@280/i2c-mux@70/i2c@0/pca9551@62: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@300/i2c-mux@70/i2c@0/pca9551@60: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@280/i2c-mux@70/i2c@1/pca9551@60: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@300/i2c-mux@70/i2c@1/pca9551@61: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@280/i2c-mux@70/i2c@2/pca9551@61: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@300/pca9552@66: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@300/i2c-mux@70/i2c@0/pca9551@60: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@300/i2c-mux@70/i2c@1/pca9551@61: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9552@30: failed to match any schema with compatible: ['ibm,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@300/i2c-mux@70/i2c@2/pca9551@62: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@300/i2c-mux@70/i2c@3/pca9551@63: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9552@31: failed to match any schema with compatible: ['ibm,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@380/i2c-mux@70/i2c@0/pca9551@60: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@380/i2c-mux@70/i2c@1/pca9551@62: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9552@32: failed to match any schema with compatible: ['ibm,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@380/i2c-mux@70/i2c@2/pca9551@63: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@380/i2c-mux@70/i2c@3/pca9551@61: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@380/pca9552@65: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9552@33: failed to match any schema with compatible: ['ibm,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9552@31: failed to match any schema with compatible: ['ibm,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/max31785@52: failed to match any schema with compatible: ['maxim,max31785a'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9551@60: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9552@61: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9552@32: failed to match any schema with compatible: ['ibm,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: dps310@76: '#io-channel-cells' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/trivial-devices.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9552@33: failed to match any schema with compatible: ['ibm,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@480/pca9552@60: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@480/pca9552@61: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9552@30: failed to match any schema with compatible: ['ibm,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@600/i2c-mux@70/i2c@0/pca9551@60: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9552@34: failed to match any schema with compatible: ['ibm,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@700/pca9552@60: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@400/pca9552@35: failed to match any schema with compatible: ['ibm,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@780/pca9552@60: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/bus@1e78a000/i2c-bus@800/pca9552@60: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: fsi@1e79b000: Unevaluated properties are not allowed ('#interrupt-cells', 'compatible', 'interrupt-controller' were unexpected) from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@70/i2c@2/pca9551@60: failed to match any schema with compatible: ['nxp,pca9551'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@70/i2c@3/max31785@52: failed to match any schema with compatible: ['maxim,max31785a'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@70/i2c@3/pca9552@60: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/bus@1e78a000/i2c-bus@780/i2c-mux@70/i2c@3/pca9552@61: failed to match any schema with compatible: ['nxp,pca9552'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: fsi@1e79b000: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: fsi@1e79b000: Unevaluated properties are not allowed ('#interrupt-cells', 'compatible', 'interrupt-controller' were unexpected) from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/fsi@1e79b000: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-blueridge.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: fsi@1e79b100: compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] is too long from schema $id: http://devicetree.org/schemas/fsi/aspeed,ast2600-fsi-master.yaml# arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/fsi@1e79b100: failed to match any schema with compatible: ['aspeed,ast2600-fsi-master', 'fsi-master'] arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-fuji.dtb: /ahb/apb/dma-controller@1e79e000: failed to match any schema with compatible: ['aspeed,ast2600-udma']
On 4/26/24 01:18, Krzysztof Kozlowski wrote: > On 25/04/2024 23:36, Eddie James wrote: >> The FSI2PIB or SCOM engine provides an interface to the POWER processor >> PIB (Pervasive Interconnect Bus). >> >> Signed-off-by: Eddie James <eajames@linux.ibm.com> >> --- >> .../devicetree/bindings/fsi/ibm,fsi2pib.yaml | 38 +++++++++++++++++++ >> 1 file changed, 38 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml >> >> diff --git a/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml b/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml >> new file mode 100644 >> index 000000000000..4d557150c2e3 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/fsi/ibm,fsi2pib.yaml >> @@ -0,0 +1,38 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/fsi/ibm,fsi2pib.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: IBM FSI-attached SCOM engine >> + >> +maintainers: >> + - Eddie James <eajames@linux.ibm.com> >> + >> +description: >> + The SCOM engine is an interface to the POWER processor PIB (Pervasive >> + Interconnect Bus). This node will always be a child of an FSI CFAM node; >> + see fsi.txt for details on FSI slave and CFAM nodes. >> + >> +properties: >> + compatible: >> + enum: >> + - ibm,fsi2pib >> + - ibm,i2cr-scom > Sometimes you call these p9, sometimes p10... what is the system or SoC > here? Aren't you adding some generic compatibles? writing-bindings and > numerous guides are clear on that. Open source FSI support started with P9 chips so we initially added p9-sbefifo, p9-occ, etc. P10 has all of the same engines as P9 plus the SPI controller, so that's why SPI is p10-spi. P11 has the same engines as P10. For scom/fsi2pib we could call it p9-scom I suppose... This series isn't just documentation for a new system, I'm adding documentation that should have been added for P9. Anyway I'm not sure what you mean about generic compatibles? You mean just add a "scom" or "fsi2pib" compatible? writing-bindings says "DO make 'compatible' properties specific" Thanks, Eddie > > Best regards, > Krzysztof >
On 4/26/24 01:19, Krzysztof Kozlowski wrote: > On 25/04/2024 23:36, Eddie James wrote: >> Switch to yaml for the OCC documentation. Also document the fact >> that the OCC "bridge" device will often have the hwmon node as a >> child. >> >> Signed-off-by: Eddie James <eajames@linux.ibm.com> >> --- >> .../devicetree/bindings/fsi/ibm,p9-occ.txt | 16 -------- >> .../devicetree/bindings/fsi/ibm,p9-occ.yaml | 41 +++++++++++++++++++ >> 2 files changed, 41 insertions(+), 16 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt >> create mode 100644 Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml >> >> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt >> deleted file mode 100644 >> index e73358075a90..000000000000 >> --- a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.txt >> +++ /dev/null >> @@ -1,16 +0,0 @@ >> -Device-tree bindings for FSI-attached POWER9/POWER10 On-Chip Controller (OCC) >> ------------------------------------------------------------------------------ >> - >> -This is the binding for the P9 or P10 On-Chip Controller accessed over FSI from >> -a service processor. See fsi.txt for details on bindings for FSI slave and CFAM >> -nodes. The OCC is not an FSI slave device itself, rather it is accessed >> -through the SBE FIFO. >> - >> -Required properties: >> - - compatible = "ibm,p9-occ" or "ibm,p10-occ" >> - >> -Examples: >> - >> - occ { >> - compatible = "ibm,p9-occ"; >> - }; >> diff --git a/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml >> new file mode 100644 >> index 000000000000..1fa87d452489 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/fsi/ibm,p9-occ.yaml >> @@ -0,0 +1,41 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/fsi/ibm,p9-occ.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: IBM FSI-attached On-Chip Controller (OCC) >> + >> +maintainers: >> + - Eddie James <eajames@linux.ibm.com> >> + >> +description: >> + The POWER processor On-Chip Controller (OCC) helps manage power and >> + thermals for the system, accessed through the FSI-attached SBEFIFO >> + from a service processor. >> + >> +properties: >> + compatible: >> + enum: >> + - ibm,p9-occ >> + - ibm,p10-occ >> + >> + reg: >> + items: >> + - description: Processor index >> + >> +required: >> + - compatible > required goes after all properties, so below. Ack. > >> + >> +patternProperties: >> + "^occ-hwmon(@.*)?": >> + type: object >> + $ref: /schemas/hwmon/ibm,occ-hwmon.yaml > Drop occ, not relevant. Why unit address is optional? This is supposed > to be specific. Use proper regex as well for hex numbers. Well, there isn't really any concept of address here, it's a 1-to-1 relationship. I should just drop the unit address. > >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + occ { >> + compatible = "ibm,p9-occ"; > Not complete. Ack. > > > Best regards, > Krzysztof >
On 4/26/24 01:20, Krzysztof Kozlowski wrote: > On 25/04/2024 23:36, Eddie James wrote: >> The SBEFIFO engine provides an interface to the POWER processor >> Self Boot Engine (SBE). >> >> Signed-off-by: Eddie James <eajames@linux.ibm.com> >> Acked-by: Conor Dooley <conor.dooley@microchip.com> >> Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au> >> --- > >> +description: >> + The SBEFIFO is an FSI CFAM engine that provides an interface to the >> + POWER processor Self Boot Engine (SBE). This node will always be a child >> + of an FSI CFAM node; see fsi.txt for details on FSI slave and CFAM >> + nodes. >> + >> +properties: >> + compatible: >> + enum: >> + - ibm,p9-sbefifo >> + - ibm,odyssey-sbefifo >> + >> + reg: >> + items: >> + - description: FSI slave address >> + >> + "#address-cells": >> + const: 1 >> + >> + "#size-cells": >> + const: 0 >> + >> +patternProperties: >> + "^occ(@.*)?": > Why unit address is optional? In this case, it's because we use the reg property (reflecting the unit address) to indicate the processor index of the occ node. However I think I should drop the unit address here, it's meaningless, there is no addressing for the OCC from the SBEFIFO. > > > > Best regards, > Krzysztof >
On 4/26/24 01:23, Krzysztof Kozlowski wrote: > On 25/04/2024 23:36, Eddie James wrote: >> Since there are multiple FSI controllers documented, the common >> properties should be documented separately and then referenced >> from the specific controller documentation. >> >> Signed-off-by: Eddie James <eajames@linux.ibm.com> >> --- > >> + >> + no-scan-on-init: >> + $ref: /schemas/types.yaml#/definitions/flag >> + description: >> + The FSI controller cannot scan the bus during initialization. >> + >> +patternProperties: >> + "cfam@[0-9a-f],[0-9a-f]": >> + type: object >> + properties: >> + chip-id: >> + $ref: /schemas/types.yaml#/definitions/uint32 > Missing description Ack'd, and comments below > >> + >> + reg: >> + maxItems: 1 >> + >> + "#address-cells": >> + const: 1 >> + >> + "#size-cells": >> + const: 1 >> + >> + required: >> + - reg >> + >> + additionalProperties: true> + >> +additionalProperties: true >> + >> +examples: >> + - | >> + fsi@3400 { >> + #address-cells = <2>; >> + #size-cells = <0>; >> + compatible = "fsi-controller"; > No, there is no such compatible here. > >> + reg = <0x3400 0x400>; > Neither reg. > > Also, keep order of properties matching DTS coding style. > > > Best regards, > Krzysztof >
On 4/26/24 01:29, Krzysztof Kozlowski wrote: > On 25/04/2024 23:36, Eddie James wrote: >> Switch to yaml for the FSI-attached I2C controller. >> >> Signed-off-by: Eddie James <eajames@linux.ibm.com> > Please use scripts/get_maintainers.pl to get a list of necessary people > and lists to CC (and consider --no-git-fallback argument). It might > happen, that command when run on an older kernel, gives you outdated > entries. Therefore please be sure you base your patches on recent Linux > kernel. > > Tools like b4 or scripts/get_maintainer.pl provide you proper list of > people, so fix your workflow. Tools might also fail if you work on some > ancient tree (don't, instead use mainline), work on fork of kernel > (don't, instead use mainline) or you ignore some maintainers (really > don't). Just use b4 and everything should be fine, although remember > about `b4 prep --auto-to-cc` if you added new patches to the patchset. > >> --- >> .../devicetree/bindings/i2c/i2c-fsi.txt | 40 ------------- >> .../devicetree/bindings/i2c/ibm,i2c-fsi.yaml | 59 +++++++++++++++++++ >> 2 files changed, 59 insertions(+), 40 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-fsi.txt >> create mode 100644 Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml >> > >> - }; >> diff --git a/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml >> new file mode 100644 >> index 000000000000..473a45de1b6c >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/i2c/ibm,i2c-fsi.yaml >> @@ -0,0 +1,59 @@ >> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/i2c/ibm,i2c-fsi.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: IBM FSI-attached I2C controller >> + >> +maintainers: >> + - Eddie James <eajames@linux.ibm.com> >> + >> +description: >> + This I2C controller is an FSI CFAM engine, providing access to a number of >> + I2C busses. Therefore this node will always be a child of an FSI CFAM node; >> + see fsi.txt for details on FSI slave and CFAM nodes. > Here and in all other schemas - remove reference to fsi.txt. You are > going to drop this file once you convert everything, right? Good point, yes. > >> + >> +properties: >> + compatible: >> + enum: >> + - ibm,i2c-fsi >> + >> + reg: >> + items: >> + - description: FSI slave address >> + >> +required: >> + - compatible >> + - reg >> + >> +allOf: >> + - $ref: /schemas/i2c/i2c-controller.yaml# >> + >> +unevaluatedProperties: false >> + >> +examples: >> + - | >> + i2c@1800 { > So no wrapper node is needed. Drop the wrapper node in previous patchset > where you introduced one with warning. The other one is actually a child node of the equivalent spi controller, so it does need some sort of wrapper (address-cells and size-cells don't match). > > > Best regards, > Krzysztof >