diff mbox series

[v6,1/3] serial: sc16is7xx: announce support of SER_RS485_RTS_ON_SEND

Message ID 20240422123801.2695129-2-rilian.la.te@ya.ru
State Superseded
Headers show
Series add support for EXAR XR20M1172 UART | expand

Commit Message

Konstantin Pugin April 22, 2024, 12:37 p.m. UTC
From: Konstantin Pugin <ria.freelander@gmail.com>

The hardware supports both RTS_ON_SEND and RTS_AFTER_SEND modes, but
after the commit 4afeced55baa ("serial: core: fix sanitizing check for
RTS settings") we always end up with SER_RS485_RTS_AFTER_SEND set and
always write to the register field SC16IS7XX_EFCR_RTS_INVERT_BIT, which
breaks some hardware using these chips.

Fixes: 267913ecf737 ("serial: sc16is7xx: Fill in rs485_supported")
Signed-off-by: Konstantin Pugin <ria.freelander@gmail.com>
---
 drivers/tty/serial/sc16is7xx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 03cf30e20b75..dfcc804f558f 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1449,7 +1449,7 @@  static int sc16is7xx_setup_mctrl_ports(struct sc16is7xx_port *s,
 }
 
 static const struct serial_rs485 sc16is7xx_rs485_supported = {
-	.flags = SER_RS485_ENABLED | SER_RS485_RTS_AFTER_SEND,
+	.flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND,
 	.delay_rts_before_send = 1,
 	.delay_rts_after_send = 1,	/* Not supported but keep returning -EINVAL */
 };