diff mbox series

[5.8,178/232] clk: bcm2835: Do not use prediv with bcm2711s PLLs

Message ID 20200820091621.432573048@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Aug. 20, 2020, 9:20 a.m. UTC
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>

[ Upstream commit f34e4651ce66a754f41203284acf09b28b9dd955 ]

Contrary to previous SoCs, bcm2711 doesn't have a prescaler in the PLL
feedback loop. Bypass it by zeroing fb_prediv_mask when running on
bcm2711.

Note that, since the prediv configuration bits were re-purposed, this
was triggering miscalculations on all clocks hanging from the VPU clock,
notably the aux UART, making its output unintelligible.

Fixes: 42de9ad400af ("clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20200730182619.23246-1-nsaenzjulienne@suse.de
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/bcm/clk-bcm2835.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
index 6bb7efa12037b..011802f1a6df9 100644
--- a/drivers/clk/bcm/clk-bcm2835.c
+++ b/drivers/clk/bcm/clk-bcm2835.c
@@ -314,6 +314,7 @@  struct bcm2835_cprman {
 	struct device *dev;
 	void __iomem *regs;
 	spinlock_t regs_lock; /* spinlock for all clocks */
+	unsigned int soc;
 
 	/*
 	 * Real names of cprman clock parents looked up through
@@ -525,6 +526,20 @@  static int bcm2835_pll_is_on(struct clk_hw *hw)
 		A2W_PLL_CTRL_PRST_DISABLE;
 }
 
+static u32 bcm2835_pll_get_prediv_mask(struct bcm2835_cprman *cprman,
+				       const struct bcm2835_pll_data *data)
+{
+	/*
+	 * On BCM2711 there isn't a pre-divisor available in the PLL feedback
+	 * loop. Bits 13:14 of ANA1 (PLLA,PLLB,PLLC,PLLD) have been re-purposed
+	 * for to for VCO RANGE bits.
+	 */
+	if (cprman->soc & SOC_BCM2711)
+		return 0;
+
+	return data->ana->fb_prediv_mask;
+}
+
 static void bcm2835_pll_choose_ndiv_and_fdiv(unsigned long rate,
 					     unsigned long parent_rate,
 					     u32 *ndiv, u32 *fdiv)
@@ -582,7 +597,7 @@  static unsigned long bcm2835_pll_get_rate(struct clk_hw *hw,
 	ndiv = (a2wctrl & A2W_PLL_CTRL_NDIV_MASK) >> A2W_PLL_CTRL_NDIV_SHIFT;
 	pdiv = (a2wctrl & A2W_PLL_CTRL_PDIV_MASK) >> A2W_PLL_CTRL_PDIV_SHIFT;
 	using_prediv = cprman_read(cprman, data->ana_reg_base + 4) &
-		data->ana->fb_prediv_mask;
+		       bcm2835_pll_get_prediv_mask(cprman, data);
 
 	if (using_prediv) {
 		ndiv *= 2;
@@ -665,6 +680,7 @@  static int bcm2835_pll_set_rate(struct clk_hw *hw,
 	struct bcm2835_pll *pll = container_of(hw, struct bcm2835_pll, hw);
 	struct bcm2835_cprman *cprman = pll->cprman;
 	const struct bcm2835_pll_data *data = pll->data;
+	u32 prediv_mask = bcm2835_pll_get_prediv_mask(cprman, data);
 	bool was_using_prediv, use_fb_prediv, do_ana_setup_first;
 	u32 ndiv, fdiv, a2w_ctl;
 	u32 ana[4];
@@ -682,7 +698,7 @@  static int bcm2835_pll_set_rate(struct clk_hw *hw,
 	for (i = 3; i >= 0; i--)
 		ana[i] = cprman_read(cprman, data->ana_reg_base + i * 4);
 
-	was_using_prediv = ana[1] & data->ana->fb_prediv_mask;
+	was_using_prediv = ana[1] & prediv_mask;
 
 	ana[0] &= ~data->ana->mask0;
 	ana[0] |= data->ana->set0;
@@ -692,10 +708,10 @@  static int bcm2835_pll_set_rate(struct clk_hw *hw,
 	ana[3] |= data->ana->set3;
 
 	if (was_using_prediv && !use_fb_prediv) {
-		ana[1] &= ~data->ana->fb_prediv_mask;
+		ana[1] &= ~prediv_mask;
 		do_ana_setup_first = true;
 	} else if (!was_using_prediv && use_fb_prediv) {
-		ana[1] |= data->ana->fb_prediv_mask;
+		ana[1] |= prediv_mask;
 		do_ana_setup_first = false;
 	} else {
 		do_ana_setup_first = true;
@@ -2238,6 +2254,7 @@  static int bcm2835_clk_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, cprman);
 
 	cprman->onecell.num = asize;
+	cprman->soc = pdata->soc;
 	hws = cprman->onecell.hws;
 
 	for (i = 0; i < asize; i++) {