diff mbox series

[5.13,124/175] serial: tegra: Only print FIFO error message when an error occurs

Message ID 20210810173005.036632950@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Aug. 10, 2021, 5:30 p.m. UTC
From: Jon Hunter <jonathanh@nvidia.com>

commit cc9ca4d95846cbbece48d9cd385550f8fba6a3c1 upstream.

The Tegra serial driver always prints an error message when enabling the
FIFO for devices that have support for checking the FIFO enable status.
Fix this by displaying the error message, only when an error occurs.

Finally, update the error message to make it clear that enabling the
FIFO failed and display the error code.

Fixes: 222dcdff3405 ("serial: tegra: check for FIFO mode enabled status")
Cc: <stable@vger.kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20210630125643.264264-1-jonathanh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/tty/serial/serial-tegra.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
diff mbox series

Patch

--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1045,9 +1045,11 @@  static int tegra_uart_hw_init(struct teg
 
 	if (tup->cdata->fifo_mode_enable_status) {
 		ret = tegra_uart_wait_fifo_mode_enabled(tup);
-		dev_err(tup->uport.dev, "FIFO mode not enabled\n");
-		if (ret < 0)
+		if (ret < 0) {
+			dev_err(tup->uport.dev,
+				"Failed to enable FIFO mode: %d\n", ret);
 			return ret;
+		}
 	} else {
 		/*
 		 * For all tegra devices (up to t210), there is a hardware