From patchwork Wed Apr 3 12:07:40 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 785416 Delivered-To: patch@linaro.org Received: by 2002:adf:f001:0:b0:33e:7753:30bd with SMTP id j1csp280504wro; Wed, 3 Apr 2024 05:08:46 -0700 (PDT) X-Forwarded-Encrypted: i=2; AJvYcCVOHwNLxg2V7zGChT1kxyO74AqZaiPyLY01UhevMwLN24lph9ZvAnV/MWKhqAVcL8U9CLITNAxqNUPnTaj6dzFG X-Google-Smtp-Source: AGHT+IGH85Zz9zCMStLUZf7DQcRl0XXUW2uSuxpMy2N3/lr20Aaw4OvskMqwAQKgvt0bsOsgDrmx X-Received: by 2002:a17:906:ccc3:b0:a47:4b3e:a966 with SMTP id ot3-20020a170906ccc300b00a474b3ea966mr9735929ejb.75.1712146126034; Wed, 03 Apr 2024 05:08:46 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1712146126; cv=none; d=google.com; s=arc-20160816; b=JBrU8TKG5o7EhmVwWZNVFAJaRwv+FT0rYCAG1RNomJX4SSskWvwH7SUumSkqAhB7B5 kJ0OaFCpSNfQlxr15p0NGq9S0OFjPb4hi9dRsRy61cnSa5swkD3p6tJuSjQuDBHP8xQP aL7SigdOT47hMnanxYjM9IPQgGeBXEX9QAOa/SRMqWZk2BoTydLQkDyUjOMgDqcwXgWH GQwDHLjAVzPrRjlDLyCQgoJdkvWGimeQSVSZdFnm/EAQpQoILEY0CCS7tVDzETf+6vl1 LPbYsoygElvhptOq+YiJwbhtf/wpQSLY6+KWDqLYhhkTSbYt9ClQI+ZugrqH+4IICVxI dJhw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:cc:to:in-reply-to:references :message-id:content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=juaadawQi5dtqVZYnJ+QwO1/OAexPncDaRDXhesSnrw=; fh=gSVpyLKtvZ+QePPYgVwr0OwBuSQ/slJGUurC/y9msiw=; b=ADb+TE+oVRuzHn8/5N+2cZeRxUQXJ9L1UrAXQHJU1DePymwyU790PxyTkI2INvcSf2 juAbsJM+h1kTzh1+Zs+oSXBGCvsccpLdj7EMyjetz28IjBNYZoAAm7KzEtyEQlsm3ajg 5vUDHvDnvwRangaVbhoxv5rAewQ7bMspPSaASNon+7vxXf7cNrZTUlK2QT7Mei3q96Jg HVSq6ToIJSaVhnEXsg08QYJyURTiFhXA3Vd5smIh/5UUzlmw/tW6ZPSq4QBeC5z4nCrd TaivoYvJl5DPyfEoXc+C93LDBuysf/op2c7XIxRZ73GOlbto33ju1ds0Fscd5BAry/XX xX4w==; dara=google.com ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=WchRs6y0; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [2a01:238:438b:c500:173d:9f52:ddab:ee01]) by mx.google.com with ESMTPS id cx10-20020a170906c80a00b00a4e6f67eb02si2809506ejb.800.2024.04.03.05.08.45 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 03 Apr 2024 05:08:46 -0700 (PDT) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=WchRs6y0; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 3318A8839C; Wed, 3 Apr 2024 14:07:59 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="WchRs6y0"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id C5AFE8839E; Wed, 3 Apr 2024 14:07:57 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.2 Received: from mail-ed1-x534.google.com (mail-ed1-x534.google.com [IPv6:2a00:1450:4864:20::534]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id EC8B988378 for ; Wed, 3 Apr 2024 14:07:54 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=caleb.connolly@linaro.org Received: by mail-ed1-x534.google.com with SMTP id 4fb4d7f45d1cf-56df377bd13so2262512a12.0 for ; Wed, 03 Apr 2024 05:07:54 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1712146074; x=1712750874; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=juaadawQi5dtqVZYnJ+QwO1/OAexPncDaRDXhesSnrw=; b=WchRs6y0xnUKKCbkJUdmIu4wxK1vNf8XA55KSMze3lOuQVP0oOTXWd2YKibxIfdcgT ER0cER2d6MFXQIvJJvCwRc9xdNUnVDD9SHE5yS4LhR6kWk9R+a2wPtf4144usi3esEFw R6Zx0EhDrZDb8cV2KrMlgFfhNcMzN7chPAj58Lvyk55E3q5I5iNdkBw8rqR17niQI3Wb 4K5gp491MK+Jnj+rshLkAST3AnPKt56J5Gem/2M2AXUFK/HaT+DAwkW9i8e8/d4+dYd9 hP067NxAg0aTPYRuoalJ5gSP2J8z7IoUpBmMNS14/3rNhRF/i55TS9Hv7BYp8r7XJ5pV pilA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1712146074; x=1712750874; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=juaadawQi5dtqVZYnJ+QwO1/OAexPncDaRDXhesSnrw=; b=U+lEXI64HsvxMbr9u8WJEtW6c5EtSP3tdxm+wfTudKjMnGtiOgT9q7CJfISLumjH2H v+KWm3WbVfVIzgMpxemTgAKa1ls83hTczN7AUIe9PhFhOKJrdLf2JYxgOJb0tnzLLbT4 /IIRTsrjHWUTETfKJk0U+fJKRzavN0Dax/dxoGUacVLn920XHpOSOp6GtqUIt+9N5iHW xnJRkG4IflKUGtRBFNSW0X8gIdHCa7uezQqO2KSa/gg7HuO3ene5tvuX8Umd4M1dr+IH cuehH6PS6GSNzyp2jHjglK5bti+roeOfujJp8tcZFkR7BQ+RSclhLz33BHUanGuNTg0y mgiA== X-Gm-Message-State: AOJu0Yy0sBRmadMVu1+a6O8Ja2nV730ZK0ICBqv61kdU4l6+1ZE2Q/rt ZeHD8cEP+kDhj1SZW+plZ++QskmR02nVxaG4aiKAlH3SrTPWAX+rX5x4NPEZlnk= X-Received: by 2002:a17:906:1d45:b0:a4e:46df:bae9 with SMTP id o5-20020a1709061d4500b00a4e46dfbae9mr7777423ejh.20.1712146074487; Wed, 03 Apr 2024 05:07:54 -0700 (PDT) Received: from [192.168.0.113] ([2a02:8109:aa0d:be00::38e6]) by smtp.gmail.com with ESMTPSA id lr20-20020a170906fb9400b00a46a04d7dc4sm7654674ejb.61.2024.04.03.05.07.53 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 03 Apr 2024 05:07:54 -0700 (PDT) From: Caleb Connolly Date: Wed, 03 Apr 2024 14:07:40 +0200 Subject: [PATCH v6 05/16] clk/qcom: use offsets for RCG registers MIME-Version: 1.0 Message-Id: <20240403-b4-qcom-livetree-v6-5-130f8f50b538@linaro.org> References: <20240403-b4-qcom-livetree-v6-0-130f8f50b538@linaro.org> In-Reply-To: <20240403-b4-qcom-livetree-v6-0-130f8f50b538@linaro.org> To: Tom Rini , Caleb Connolly , Neil Armstrong , Sumit Garg , Lukasz Majewski , Sean Anderson Cc: u-boot@lists.denx.de X-Mailer: b4 0.13-dev-4bd13 X-Developer-Signature: v=1; a=openpgp-sha256; l=21534; i=caleb.connolly@linaro.org; h=from:subject:message-id; bh=eOFtlhU96dqlEnXPalbLBCT2nnod4qFsAzqcv/bfsS4=; b=owEBbQKS/ZANAwAIAQWDMSsZX2S2AcsmYgBmDUaQe2zgFrVaTDXAmGS8YDzJYqXf3T2xg30H1 28mHSQTWz6JAjMEAAEIAB0WIQS2UaFGPGq+0GkMVc0FgzErGV9ktgUCZg1GkAAKCRAFgzErGV9k ttaTEACmZThTBsfTW8OII0oQ4Z4OsbVv3xhmnvjJAZTphUnMFot4WNMI7zfUz8nX7TMALGIS4/i whcV8RZySCLr6skDsWuAybwtXVC1pcF9YNthyI2b0SVcVOcRGs4z6xtwIbN2QxaL+Zg7krd1rRq /Td4DCxfQP7uG5Nba3q7JdcwZ0xhHtesuDXNjgVGoI4Hu838tKVLQN/VYXVwZEwl8ezFK5sWE+5 fL3abhCZZiue+CIn5U2z7t4IL7Y7Ufw0iXF6l+BHoz2PKAy/x/ZYUNBWRSf4kKKj0acxxqnxCM9 oLEOYE0UM0x2jg22elXUyPBqLKm7i9xuj3YSI1nrTpZ5hKifNDPjABaYSQU/a3spOxkTwfXlRwK TOK+ZOHrEvkMKCxxaPmNMoFlQn3Tmv+pANPdho11D7f93zOxo543yMHIYg/KJMPpQTkNrgUhlyd 6i+l4Iz9/HdVASlR6L5WXWRKisyEB5PjGGL7bck0z+6Orm6Q25L+jX3HiqSpQiU7doUtwJuC70A GR43c+dyQyc44nwT+yJkk6+lNuB9BD/l33WYuFaje8iZHRU0dEz99oGdQhnuZzj7EkdeGPllnVn gzQPq+4WZU8ddH+KtAyxhPIFQK8JSJHsZ07QmEksl9kF87PAmC8iF0jDQ10AOckU7/6dDkQt4qm Hdv0szJ5M+pmwiQ== X-Developer-Key: i=caleb.connolly@linaro.org; a=openpgp; fpr=83B24DA7FE145076BC38BB250CD904EB673A7C47 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean The RCG registers always have the same offsets, so only store the base CMD register address and calculate the others relative to that. Reviewed-by: Sumit Garg Signed-off-by: Caleb Connolly --- drivers/clk/qcom/clock-apq8016.c | 39 +------------ drivers/clk/qcom/clock-apq8096.c | 28 +-------- drivers/clk/qcom/clock-qcom.c | 22 +++---- drivers/clk/qcom/clock-qcom.h | 16 +++-- drivers/clk/qcom/clock-qcs404.c | 122 +++++---------------------------------- drivers/clk/qcom/clock-sdm845.c | 16 +---- 6 files changed, 39 insertions(+), 204 deletions(-) diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c index e6647f7c41dd..5a5868169c89 100644 --- a/drivers/clk/qcom/clock-apq8016.c +++ b/drivers/clk/qcom/clock-apq8016.c @@ -22,13 +22,9 @@ #define APCS_GPLL_ENA_VOTE (0x45000) #define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004) #define SDCC_BCR(n) ((n * 0x1000) + 0x41000) -#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004) -#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008) -#define SDCC_M(n) ((n * 0x1000) + 0x4100C) -#define SDCC_N(n) ((n * 0x1000) + 0x41010) -#define SDCC_D(n) ((n * 0x1000) + 0x41014) +#define SDCC_CMD_RCGR(n) (((n + 1) * 0x1000) + 0x41004) #define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018) #define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C) /* BLSP1 AHB clock (root clock for BLSP) */ @@ -37,33 +33,12 @@ /* Uart clock control registers */ #define BLSP1_UART2_BCR (0x3028) #define BLSP1_UART2_APPS_CBCR (0x302C) #define BLSP1_UART2_APPS_CMD_RCGR (0x3034) -#define BLSP1_UART2_APPS_CFG_RCGR (0x3038) -#define BLSP1_UART2_APPS_M (0x303C) -#define BLSP1_UART2_APPS_N (0x3040) -#define BLSP1_UART2_APPS_D (0x3044) /* GPLL0 clock control registers */ #define GPLL0_STATUS_ACTIVE BIT(17) -static const struct bcr_regs sdc_regs[] = { - { - .cfg_rcgr = SDCC_CFG_RCGR(1), - .cmd_rcgr = SDCC_CMD_RCGR(1), - .M = SDCC_M(1), - .N = SDCC_N(1), - .D = SDCC_D(1), - }, - { - .cfg_rcgr = SDCC_CFG_RCGR(2), - .cmd_rcgr = SDCC_CMD_RCGR(2), - .M = SDCC_M(2), - .N = SDCC_N(2), - .D = SDCC_D(2), - } -}; - static struct pll_vote_clk gpll0_vote_clk = { .status = GPLL0_STATUS, .status_bit = GPLL0_STATUS_ACTIVE, .ena_vote = APCS_GPLL_ENA_VOTE, @@ -85,32 +60,24 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) div = 4; clk_enable_cbc(priv->base + SDCC_AHB_CBCR(slot)); /* 800Mhz/div, gpll0 */ - clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0, + clk_rcg_set_rate_mnd(priv->base, SDCC_CMD_RCGR(slot), div, 0, 0, CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot)); return rate; } -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR, - .cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR, - .M = BLSP1_UART2_APPS_M, - .N = BLSP1_UART2_APPS_N, - .D = BLSP1_UART2_APPS_D, -}; - /* UART: 115200 */ int apq8016_clk_init_uart(phys_addr_t base) { /* Enable AHB clock */ clk_enable_vote_clk(base, &gcc_blsp1_ahb_clk); /* 7372800 uart block clock @ GPLL0 */ - clk_rcg_set_rate_mnd(base, &uart2_regs, 1, 144, 15625, + clk_rcg_set_rate_mnd(base, BLSP1_UART2_APPS_CMD_RCGR, 1, 144, 15625, CFG_CLK_SRC_GPLL0, 16); /* Vote for gpll0 clock */ clk_enable_gpll0(base, &gpll0_vote_clk); diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c index a4731613c5e0..479f9771a464 100644 --- a/drivers/clk/qcom/clock-apq8096.c +++ b/drivers/clk/qcom/clock-apq8096.c @@ -25,33 +25,17 @@ #define SDCC2_BCR (0x14000) /* block reset */ #define SDCC2_APPS_CBCR (0x14004) /* branch control */ #define SDCC2_AHB_CBCR (0x14008) #define SDCC2_CMD_RCGR (0x14010) -#define SDCC2_CFG_RCGR (0x14014) -#define SDCC2_M (0x14018) -#define SDCC2_N (0x1401C) -#define SDCC2_D (0x14020) #define BLSP2_AHB_CBCR (0x25004) #define BLSP2_UART2_APPS_CBCR (0x29004) #define BLSP2_UART2_APPS_CMD_RCGR (0x2900C) -#define BLSP2_UART2_APPS_CFG_RCGR (0x29010) -#define BLSP2_UART2_APPS_M (0x29014) -#define BLSP2_UART2_APPS_N (0x29018) -#define BLSP2_UART2_APPS_D (0x2901C) /* GPLL0 clock control registers */ #define GPLL0_STATUS_ACTIVE BIT(30) #define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0) -static const struct bcr_regs sdc_regs = { - .cfg_rcgr = SDCC2_CFG_RCGR, - .cmd_rcgr = SDCC2_CMD_RCGR, - .M = SDCC2_M, - .N = SDCC2_N, - .D = SDCC2_D, -}; - static const struct pll_vote_clk gpll0_vote_clk = { .status = GPLL0_STATUS, .status_bit = GPLL0_STATUS_ACTIVE, .ena_vote = APCS_GPLL_ENA_VOTE, @@ -68,31 +52,23 @@ static int clk_init_sdc(struct msm_clk_priv *priv, uint rate) { int div = 5; clk_enable_cbc(priv->base + SDCC2_AHB_CBCR); - clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0, + clk_rcg_set_rate_mnd(priv->base, SDCC2_CMD_RCGR, div, 0, 0, CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC2_APPS_CBCR); return rate; } -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = BLSP2_UART2_APPS_CFG_RCGR, - .cmd_rcgr = BLSP2_UART2_APPS_CMD_RCGR, - .M = BLSP2_UART2_APPS_M, - .N = BLSP2_UART2_APPS_N, - .D = BLSP2_UART2_APPS_D, -}; - static int clk_init_uart(struct msm_clk_priv *priv) { /* Enable AHB clock */ clk_enable_vote_clk(priv->base, &gcc_blsp2_ahb_clk); /* 7372800 uart block clock @ GPLL0 */ - clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 192, 15625, + clk_rcg_set_rate_mnd(priv->base, BLSP2_UART2_APPS_CMD_RCGR, 1, 192, 15625, CFG_CLK_SRC_GPLL0, 16); /* Vote for gpll0 clock */ clk_enable_gpll0(priv->base, &gpll0_vote_clk); diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c index 6303dcbf8461..05e5ab7d094b 100644 --- a/drivers/clk/qcom/clock-qcom.c +++ b/drivers/clk/qcom/clock-qcom.c @@ -103,9 +103,9 @@ void clk_bcr_update(phys_addr_t apps_cmd_rcgr) /* * root set rate for clocks with half integer and MND divider * div should be pre-calculated ((div * 2) - 1) */ -void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, +void clk_rcg_set_rate_mnd(phys_addr_t base, uint32_t cmd_rcgr, int div, int m, int n, int source, u8 mnd_width) { u32 cfg; /* M value for MND divider. */ @@ -119,14 +119,14 @@ void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, debug("m %#x n %#x d %#x div %#x mask %#x\n", m_val, n_val, d_val, div, mask); /* Program MND values */ - writel(m_val & mask, base + regs->M); - writel(n_val & mask, base + regs->N); - writel(d_val & mask, base + regs->D); + writel(m_val & mask, base + cmd_rcgr + RCG_M_REG); + writel(n_val & mask, base + cmd_rcgr + RCG_N_REG); + writel(d_val & mask, base + cmd_rcgr + RCG_D_REG); /* setup src select and divider */ - cfg = readl(base + regs->cfg_rcgr); + cfg = readl(base + cmd_rcgr + RCG_CFG_REG); cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK | CFG_SRC_DIV_MASK); cfg |= source & CFG_SRC_SEL_MASK; /* Select clock source */ @@ -135,22 +135,22 @@ void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, if (n && n != m) cfg |= CFG_MODE_DUAL_EDGE; - writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */ + writel(cfg, base + cmd_rcgr + RCG_CFG_REG); /* Write new clock configuration */ /* Inform h/w to start using the new config. */ - clk_bcr_update(base + regs->cmd_rcgr); + clk_bcr_update(base + cmd_rcgr); } /* root set rate for clocks with half integer and mnd_width=0 */ -void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, +void clk_rcg_set_rate(phys_addr_t base, uint32_t cmd_rcgr, int div, int source) { u32 cfg; /* setup src select and divider */ - cfg = readl(base + regs->cfg_rcgr); + cfg = readl(base + cmd_rcgr + RCG_CFG_REG); cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK); cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */ /* @@ -159,12 +159,12 @@ void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, */ if (div) cfg |= (2 * div - 1) & CFG_SRC_DIV_MASK; - writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */ + writel(cfg, base + cmd_rcgr + RCG_CFG_REG); /* Write new clock configuration */ /* Inform h/w to start using the new config. */ - clk_bcr_update(base + regs->cmd_rcgr); + clk_bcr_update(base + cmd_rcgr); } const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate) { diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h index 12a1eaec2b2e..a7f833a4b6dd 100644 --- a/drivers/clk/qcom/clock-qcom.h +++ b/drivers/clk/qcom/clock-qcom.h @@ -11,8 +11,13 @@ #define CFG_CLK_SRC_GPLL0 (1 << 8) #define CFG_CLK_SRC_GPLL0_EVEN (6 << 8) #define CFG_CLK_SRC_MASK (7 << 8) +#define RCG_CFG_REG 0x4 +#define RCG_M_REG 0x8 +#define RCG_N_REG 0xc +#define RCG_D_REG 0x10 + struct pll_vote_clk { uintptr_t status; int status_bit; uintptr_t ena_vote; @@ -23,15 +28,8 @@ struct vote_clk { uintptr_t cbcr_reg; uintptr_t ena_vote; int vote_bit; }; -struct bcr_regs { - uintptr_t cfg_rcgr; - uintptr_t cmd_rcgr; - uintptr_t M; - uintptr_t N; - uintptr_t D; -}; struct freq_tbl { uint freq; uint src; @@ -87,11 +85,11 @@ void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0); void clk_bcr_update(phys_addr_t apps_cmd_rgcr); void clk_enable_cbc(phys_addr_t cbcr); void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk); const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate); -void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, +void clk_rcg_set_rate_mnd(phys_addr_t base, uint32_t cmd_rcgr, int div, int m, int n, int source, u8 mnd_width); -void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, +void clk_rcg_set_rate(phys_addr_t base, uint32_t cmd_rcgr, int div, int source); static inline void qcom_gate_clk_en(const struct msm_clk_priv *priv, unsigned long id) { diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c index 958312b88842..8a897a52bc00 100644 --- a/drivers/clk/qcom/clock-qcs404.c +++ b/drivers/clk/qcom/clock-qcs404.c @@ -27,37 +27,24 @@ /* Uart clock control registers */ #define BLSP1_UART2_BCR (0x3028) #define BLSP1_UART2_APPS_CBCR (0x302C) #define BLSP1_UART2_APPS_CMD_RCGR (0x3034) -#define BLSP1_UART2_APPS_CFG_RCGR (0x3038) -#define BLSP1_UART2_APPS_M (0x303C) -#define BLSP1_UART2_APPS_N (0x3040) -#define BLSP1_UART2_APPS_D (0x3044) /* I2C controller clock control registerss */ #define BLSP1_QUP0_I2C_APPS_CBCR (0x6028) #define BLSP1_QUP0_I2C_APPS_CMD_RCGR (0x602C) -#define BLSP1_QUP0_I2C_APPS_CFG_RCGR (0x6030) #define BLSP1_QUP1_I2C_APPS_CBCR (0x2008) #define BLSP1_QUP1_I2C_APPS_CMD_RCGR (0x200C) -#define BLSP1_QUP1_I2C_APPS_CFG_RCGR (0x2010) #define BLSP1_QUP2_I2C_APPS_CBCR (0x3010) #define BLSP1_QUP2_I2C_APPS_CMD_RCGR (0x3000) -#define BLSP1_QUP2_I2C_APPS_CFG_RCGR (0x3004) #define BLSP1_QUP3_I2C_APPS_CBCR (0x4020) #define BLSP1_QUP3_I2C_APPS_CMD_RCGR (0x4000) -#define BLSP1_QUP3_I2C_APPS_CFG_RCGR (0x4004) #define BLSP1_QUP4_I2C_APPS_CBCR (0x5020) #define BLSP1_QUP4_I2C_APPS_CMD_RCGR (0x5000) -#define BLSP1_QUP4_I2C_APPS_CFG_RCGR (0x5004) /* SD controller clock control registers */ #define SDCC_BCR(n) (((n) * 0x1000) + 0x41000) -#define SDCC_CMD_RCGR(n) (((n) * 0x1000) + 0x41004) -#define SDCC_CFG_RCGR(n) (((n) * 0x1000) + 0x41008) -#define SDCC_M(n) (((n) * 0x1000) + 0x4100C) -#define SDCC_N(n) (((n) * 0x1000) + 0x41010) -#define SDCC_D(n) (((n) * 0x1000) + 0x41014) +#define SDCC_CMD_RCGR(n) (((n + 1) * 0x1000) + 0x41004) #define SDCC_APPS_CBCR(n) (((n) * 0x1000) + 0x41018) #define SDCC_AHB_CBCR(n) (((n) * 0x1000) + 0x4101C) /* USB-3.0 controller clock control registers */ @@ -69,12 +56,8 @@ #define USB30_MOCK_UTMI_CBCR (0x39014) #define USB30_MOCK_UTMI_CMD_RCGR (0x3901C) #define USB30_MOCK_UTMI_CFG_RCGR (0x39020) #define USB30_MASTER_CMD_RCGR (0x39028) -#define USB30_MASTER_CFG_RCGR (0x3902C) -#define USB30_MASTER_M (0x39030) -#define USB30_MASTER_N (0x39034) -#define USB30_MASTER_D (0x39038) #define USB2A_PHY_SLEEP_CBCR (0x4102C) #define USB_HS_PHY_CFG_AHB_CBCR (0x41030) /* ETH controller clock control registers */ @@ -82,14 +65,9 @@ #define ETH_RGMII_CBCR (0x4e008) #define ETH_SLAVE_AHB_CBCR (0x4e00c) #define ETH_AXI_CBCR (0x4e010) #define EMAC_PTP_CMD_RCGR (0x4e014) -#define EMAC_PTP_CFG_RCGR (0x4e018) #define EMAC_CMD_RCGR (0x4e01c) -#define EMAC_CFG_RCGR (0x4e020) -#define EMAC_M (0x4e024) -#define EMAC_N (0x4e028) -#define EMAC_D (0x4e02c) /* GPLL0 clock control registers */ #define GPLL0_STATUS_ACTIVE BIT(31) @@ -102,24 +80,8 @@ static struct vote_clk gcc_blsp1_ahb_clk = { .ena_vote = APCS_CLOCK_BRANCH_ENA_VOTE, .vote_bit = BIT(10) | BIT(5) | BIT(4), }; -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR, - .cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR, - .M = BLSP1_UART2_APPS_M, - .N = BLSP1_UART2_APPS_N, - .D = BLSP1_UART2_APPS_D, -}; - -static const struct bcr_regs sdc_regs = { - .cfg_rcgr = SDCC_CFG_RCGR(1), - .cmd_rcgr = SDCC_CMD_RCGR(1), - .M = SDCC_M(1), - .N = SDCC_N(1), - .D = SDCC_D(1), -}; - static struct pll_vote_clk gpll0_vote_clk = { .status = GPLL0_STATUS, .status_bit = GPLL0_STATUS_ACTIVE, .ena_vote = APCS_GPLL_ENA_VOTE, @@ -132,92 +94,38 @@ static struct pll_vote_clk gpll1_vote_clk = { .ena_vote = APCS_GPLL_ENA_VOTE, .vote_bit = BIT(1), }; -static const struct bcr_regs usb30_master_regs = { - .cfg_rcgr = USB30_MASTER_CFG_RCGR, - .cmd_rcgr = USB30_MASTER_CMD_RCGR, - .M = USB30_MASTER_M, - .N = USB30_MASTER_N, - .D = USB30_MASTER_D, -}; - -static const struct bcr_regs emac_regs = { - .cfg_rcgr = EMAC_CFG_RCGR, - .cmd_rcgr = EMAC_CMD_RCGR, - .M = EMAC_M, - .N = EMAC_N, - .D = EMAC_D, -}; - -static const struct bcr_regs emac_ptp_regs = { - .cfg_rcgr = EMAC_PTP_CFG_RCGR, - .cmd_rcgr = EMAC_PTP_CMD_RCGR, - .M = EMAC_M, - .N = EMAC_N, - .D = EMAC_D, -}; - -static const struct bcr_regs blsp1_qup0_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP0_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP0_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup1_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP1_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP1_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup2_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP2_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP2_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup3_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP3_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP3_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup4_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP4_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP4_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate) { struct msm_clk_priv *priv = dev_get_priv(clk->dev); switch (clk->id) { case GCC_BLSP1_UART2_APPS_CLK: /* UART: 1843200Hz for a fixed 115200 baudrate (19200000 * (12/125)) */ - clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 0, 12, 125, + clk_rcg_set_rate_mnd(priv->base, BLSP1_UART2_APPS_CMD_RCGR, 0, 12, 125, CFG_CLK_SRC_CXO, 16); clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR); return 1843200; case GCC_SDCC1_APPS_CLK: /* SDCC1: 200MHz */ - clk_rcg_set_rate_mnd(priv->base, &sdc_regs, 7, 0, 0, + clk_rcg_set_rate_mnd(priv->base, SDCC_CMD_RCGR(0), 7, 0, 0, CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC_APPS_CBCR(1)); return rate; case GCC_ETH_RGMII_CLK: if (rate == 250000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 0, 0, CFG_CLK_SRC_GPLL1, 8); else if (rate == 125000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 7, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 7, 0, 0, CFG_CLK_SRC_GPLL1, 8); else if (rate == 50000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 19, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 19, 0, 0, CFG_CLK_SRC_GPLL1, 8); else if (rate == 5000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 1, 50, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 1, 50, CFG_CLK_SRC_GPLL1, 8); return rate; } @@ -236,9 +144,9 @@ static int qcs404_clk_enable(struct clk *clk) switch (clk->id) { case GCC_USB30_MASTER_CLK: clk_enable_cbc(priv->base + USB30_MASTER_CBCR); - clk_rcg_set_rate_mnd(priv->base, &usb30_master_regs, 7, 0, 0, + clk_rcg_set_rate_mnd(priv->base, USB30_MASTER_CMD_RCGR, 7, 0, 0, CFG_CLK_SRC_GPLL0, 8); break; case GCC_SYS_NOC_USB3_CLK: clk_enable_cbc(priv->base + SYS_NOC_USB3_CBCR); @@ -258,16 +166,16 @@ static int qcs404_clk_enable(struct clk *clk) case GCC_ETH_PTP_CLK: /* SPEED_1000: freq -> 250MHz */ clk_enable_cbc(priv->base + ETH_PTP_CBCR); clk_enable_gpll0(priv->base, &gpll1_vote_clk); - clk_rcg_set_rate_mnd(priv->base, &emac_ptp_regs, 3, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_PTP_CMD_RCGR, 3, 0, 0, CFG_CLK_SRC_GPLL1, 8); break; case GCC_ETH_RGMII_CLK: /* SPEED_1000: freq -> 250MHz */ clk_enable_cbc(priv->base + ETH_RGMII_CBCR); clk_enable_gpll0(priv->base, &gpll1_vote_clk); - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 0, 0, CFG_CLK_SRC_GPLL1, 8); break; case GCC_ETH_SLAVE_AHB_CLK: clk_enable_cbc(priv->base + ETH_SLAVE_AHB_CBCR); @@ -279,29 +187,29 @@ static int qcs404_clk_enable(struct clk *clk) clk_enable_vote_clk(priv->base, &gcc_blsp1_ahb_clk); break; case GCC_BLSP1_QUP0_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP0_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup0_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP0_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP1_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP1_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup1_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP1_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP2_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP2_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup2_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP2_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP3_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP3_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup3_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP3_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP4_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP4_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup4_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP4_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_SDCC1_AHB_CLK: clk_enable_cbc(priv->base + SDCC_AHB_CBCR(1)); diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c index babd83119e2c..ccb0cf245d33 100644 --- a/drivers/clk/qcom/clock-sdm845.c +++ b/drivers/clk/qcom/clock-sdm845.c @@ -18,15 +18,9 @@ #include #include "clock-qcom.h" -#define SE9_AHB_CBCR 0x25004 -#define SE9_UART_APPS_CBCR 0x29004 #define SE9_UART_APPS_CMD_RCGR 0x18148 -#define SE9_UART_APPS_CFG_RCGR 0x1814C -#define SE9_UART_APPS_M 0x18150 -#define SE9_UART_APPS_N 0x18154 -#define SE9_UART_APPS_D 0x18158 static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = { F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625), F(14745600, CFG_CLK_SRC_GPLL0_EVEN, 1, 768, 15625), @@ -45,25 +39,17 @@ static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = { F(128000000, CFG_CLK_SRC_GPLL0, 1, 16, 75), { } }; -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = SE9_UART_APPS_CFG_RCGR, - .cmd_rcgr = SE9_UART_APPS_CMD_RCGR, - .M = SE9_UART_APPS_M, - .N = SE9_UART_APPS_N, - .D = SE9_UART_APPS_D, -}; - static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate) { struct msm_clk_priv *priv = dev_get_priv(clk->dev); const struct freq_tbl *freq; switch (clk->id) { case GCC_QUPV3_WRAP1_S1_CLK: /* UART9 */ freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate); - clk_rcg_set_rate_mnd(priv->base, &uart2_regs, + clk_rcg_set_rate_mnd(priv->base, SE9_UART_APPS_CMD_RCGR, freq->pre_div, freq->m, freq->n, freq->src, 16); return freq->freq; default: return 0;