From patchwork Fri Apr 5 09:07:42 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sumit Garg X-Patchwork-Id: 786210 Delivered-To: patch@linaro.org Received: by 2002:a05:6000:1101:b0:343:f27d:c44e with SMTP id z1csp67783wrw; Fri, 5 Apr 2024 02:09:30 -0700 (PDT) X-Forwarded-Encrypted: i=2; AJvYcCV79TVXMdZRQdos2gxCS9lXH/Wjs8jDKsZflfbat6h725GLOx871W1OiniNht+PmmTWUHI/urbIe9HKxmKhUkUg X-Google-Smtp-Source: AGHT+IGPD8R8LkruuaPYpQ45Jaj8OZDVuICR4uYQ/qTM6s+u6cAfP9/3w3DC5QsveySnR6TPYllj X-Received: by 2002:a50:9fe3:0:b0:565:a6a4:2ecc with SMTP id c90-20020a509fe3000000b00565a6a42eccmr673972edf.2.1712308170547; Fri, 05 Apr 2024 02:09:30 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1712308170; cv=none; d=google.com; s=arc-20160816; b=fyYWVIMghZFYm0wmrP4PXpJf1qRKRxGdcJLudBVIYQtaeb9Tn2t4pf5wdNkagFTmSd DYaNBIWK+zGgD8/btHha7pE2uwQdh6w5aY0aWL9/rsL3/EomhwtZx43/RWLzZQt3DMVL k8j8QGm8M78jdL9EMhzFBD5P9wKa8NeHzsfhAXTSLgzWGOTEtysqCyU5KLl9Vlyxffyc a+46qK36VcLFLpSFnLKl7xcMYeGxUNpXLK44xC9g81MLJU1pyVtWigcPCd9b+9btFbc6 Ruhs7ffcsI7CfkfDKlMEP/maj+Y5Py2lU0+9astGCNdbPbFBquoT9PmqgEDrlf3Hv1Hi W9vA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:content-transfer-encoding :mime-version:references:in-reply-to:message-id:date:subject:cc:to :from:dkim-signature; bh=61Imx7zQe5/2Gt0o54qbPN/tBXjwTBljJkUO5AGu3LA=; fh=T5H15yVH0x76eljP78R1SA5aX1AOqAQ+w8cgext4uuk=; b=dp4f7O8hnqpxb0KO41NrYoHU55rgoIa2+Q4bE37uc+YTFVlEioce/xDi2mmeggfH/S 7i1QfE4Wo2ZXDHv4UlW8Zp0pqEC9hjtgtiY5prgglvUH0p+kX6/0s9RSg7E3VUd9pLVX UjkXQOR0AUZ4x6DsQ8lzNKs40FltNCUAxrup0zBGkTUETMND1pC2qiztbMZuKPUJ1UXP dThmrDeKbvGYg1ucyTjnSeFR33CGxKIEj1siaa5vq/+koJ3jXtmjy4RBGv0P0u7uN1O8 gR6y+ZxVHI20BHCKUgiBQTX2doUpWo6IlzHsglAWwFAcDusKktfU2df649lW7olTdD4w 3YXQ==; dara=google.com ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=oAE2PESu; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [2a01:238:438b:c500:173d:9f52:ddab:ee01]) by mx.google.com with ESMTPS id n22-20020a05640205d600b0056dc938aad5si566142edx.117.2024.04.05.02.09.30 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 05 Apr 2024 02:09:30 -0700 (PDT) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=oAE2PESu; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 1A22A884F9; Fri, 5 Apr 2024 11:09:01 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="oAE2PESu"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 1B1B1884F1; Fri, 5 Apr 2024 11:08:59 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.2 Received: from mail-pl1-x634.google.com (mail-pl1-x634.google.com [IPv6:2607:f8b0:4864:20::634]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 37293884ED for ; Fri, 5 Apr 2024 11:08:56 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=sumit.garg@linaro.org Received: by mail-pl1-x634.google.com with SMTP id d9443c01a7336-1dff837d674so16837805ad.3 for ; Fri, 05 Apr 2024 02:08:56 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1712308134; x=1712912934; darn=lists.denx.de; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=61Imx7zQe5/2Gt0o54qbPN/tBXjwTBljJkUO5AGu3LA=; b=oAE2PESuJFa+gKBQHuAq9mc0kqn2cfewjusZkzqt0gEu1zy3uGiWaxwwkabhahZ+3P nGWcr9e93pjsdoM0749B7HYFJqU3zH4zQNLIoRBWUBGF9P1XhmwGp0Ye0t8CDfKaTPjq MCBNIRTBQK+GDR8qMdi49CdpNd5Ed2rGHm/cG3JKL+//UimzmjdrLsI8WLQm76xlMaCz 31hZjlIlddu/XxM9a523W3f42Ud22udno2vjW8ADKZ9E1vnaNMT7/W97YarGA+Xx7qIf L4WS7o3BkL/3H1znuBX4U/iyFxGVW1t+mjx03hPCC/EobumsJXy5LYd9LYth6A++NMYJ 01HQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1712308134; x=1712912934; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=61Imx7zQe5/2Gt0o54qbPN/tBXjwTBljJkUO5AGu3LA=; b=GLsYYK18fqSsXEXIftbo6yElSzdQJfyTLJ0gl9HpWL46FaHhu+Eah7QPP63nEN6OTo WVYF1JOnnpLIi4a6GRGQ8mTE67qRfzLmWSB4ULUOTRYFM1GRCs3OZ1UQaGae/9qxNh0y QhdupuorITu9+AnNj2VIh+w9aWPMmn4STxaWCLgL72Zk4XXEtI9BlcgzZ5h5bFgcz7bu 5ljecLWbgLHlF/+r79ztodKWJ6iAmG58G42JS89jB1b5VvvC0V5K47c3u+q/S7LguwwD TXAu6+VhKH6oopFCUoHpBmC6rPDEi4wU2qxZNQyceiPENPo2KK2JojpMcmLNo6cSbi/r aebA== X-Gm-Message-State: AOJu0YzSKnDC0krYF0BsO1AEisLag2lfLRT7PWy89hFpIc6zohGGbiTc Jq38pkGFnEuKg0NB2UuJJyWGrFBIFpSwwC+ri0GYLD6WGTKlR361iJUPNwIPHd0KJFKrUXPSbGS 9 X-Received: by 2002:a17:903:1252:b0:1e2:8d7f:10ad with SMTP id u18-20020a170903125200b001e28d7f10admr968592plh.1.1712308134304; Fri, 05 Apr 2024 02:08:54 -0700 (PDT) Received: from sumit-X1.. ([223.178.208.62]) by smtp.gmail.com with ESMTPSA id k9-20020a170902c40900b001e2c0b77b53sm1055959plk.255.2024.04.05.02.08.49 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 05 Apr 2024 02:08:54 -0700 (PDT) From: Sumit Garg To: u-boot@lists.denx.de Cc: caleb.connolly@linaro.org, neil.armstrong@linaro.org, trini@konsulko.com, lukma@denx.de, seanga2@gmail.com, sjg@chromium.org, laetitia.mariottini@se.com, pascal.eberhard@se.com, abdou.saker@se.com, jimmy.lalande@se.com, benjamin.missey@non.se.com, daniel.thompson@linaro.org, stephan@gerhold.net, Sumit Garg Subject: [PATCH v3 6/6] board: add support for Schneider HMIBSC board Date: Fri, 5 Apr 2024 14:37:42 +0530 Message-Id: <20240405090742.4148304-7-sumit.garg@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240405090742.4148304-1-sumit.garg@linaro.org> References: <20240405090742.4148304-1-sumit.garg@linaro.org> MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Support for Schneider Electric HMIBSC. Features: - Qualcomm Snapdragon 410C SoC - APQ8016 (4xCortex A53, Adreno 306) - 2GiB RAM - 64GiB eMMC, SD slot - WiFi and Bluetooth - 2x Host, 1x Device USB port - HDMI - Discrete TPM2 chip over SPI Features enabled in U-Boot: - RAUC updates - Environment protection - USB based ethernet adaptors Signed-off-by: Sumit Garg --- arch/arm/dts/apq8016-schneider-hmibsc.dts | 491 ++++++++++++++++++++++ board/schneider/hmibsc/MAINTAINERS | 6 + configs/hmibsc_defconfig | 86 ++++ doc/board/index.rst | 1 + doc/board/schneider/hmibsc.rst | 45 ++ doc/board/schneider/index.rst | 9 + include/configs/hmibsc.h | 57 +++ 7 files changed, 695 insertions(+) create mode 100644 arch/arm/dts/apq8016-schneider-hmibsc.dts create mode 100644 board/schneider/hmibsc/MAINTAINERS create mode 100644 configs/hmibsc_defconfig create mode 100644 doc/board/schneider/hmibsc.rst create mode 100644 doc/board/schneider/index.rst create mode 100644 include/configs/hmibsc.h diff --git a/arch/arm/dts/apq8016-schneider-hmibsc.dts b/arch/arm/dts/apq8016-schneider-hmibsc.dts new file mode 100644 index 00000000000..75c6137e5a1 --- /dev/null +++ b/arch/arm/dts/apq8016-schneider-hmibsc.dts @@ -0,0 +1,491 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2024, Linaro Ltd. + */ + +/dts-v1/; + +#include "msm8916-pm8916.dtsi" +#include +#include +#include +#include +#include +#include + +/ { + model = "Schneider Electric HMIBSC Board"; + compatible = "schneider,apq8016-hmibsc", "qcom,apq8016"; + + aliases { + i2c1 = &blsp_i2c6; + i2c3 = &blsp_i2c4; + i2c4 = &blsp_i2c3; + mmc0 = &sdhc_1; /* eMMC */ + mmc1 = &sdhc_2; /* SD card */ + serial0 = &blsp_uart1; + serial1 = &blsp_uart2; + spi0 = &blsp_spi5; + usid0 = &pm8916_0; + }; + + chosen { + stdout-path = "serial0"; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-0 = <&msm_key_volp_n_default>; + pinctrl-names = "default"; + + button { + label = "Volume Up"; + linux,code = ; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pm8916_mpps_leds>; + pinctrl-names = "default"; + + led-1 { + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + led-2 { + function = LED_FUNCTION_BLUETOOTH; + color = ; + gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "bluetooth-power"; + default-state = "off"; + }; + }; + + memory@80000000 { + reg = <0 0x80000000 0 0x40000000>; + }; + + reserved-memory { + ramoops@bff00000 { + compatible = "ramoops"; + reg = <0x0 0xbff00000 0x0 0x100000>; + record-size = <0x20000>; + console-size = <0x20000>; + ftrace-size = <0x20000>; + ecc-size = <16>; + }; + }; + + usb-hub { + compatible = "smsc,usb3503"; + reset-gpios = <&pm8916_gpios 1 GPIO_ACTIVE_LOW>; + initial-mode = <1>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&blsp_i2c3 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + }; +}; + +&blsp_i2c4 { + status = "okay"; + + adv_bridge: bridge@39 { + compatible = "adi,adv7533"; + reg = <0x39>; + interrupts-extended = <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + + adi,dsi-lanes = <4>; + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + pd-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&pm8916_l6>; + a2vdd-supply = <&pm8916_l6>; + dvdd-supply = <&pm8916_l6>; + pvdd-supply = <&pm8916_l6>; + v1p2-supply = <&pm8916_l6>; + v3p3-supply = <&pm8916_l17>; + + pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>; + pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>; + pinctrl-names = "default","sleep"; + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + adv7533_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp_i2c6 { + status = "okay"; + + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; +}; + +&blsp_spi5 { + cs-gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <500000>; + }; +}; + +&blsp_uart1 { + label = "UART0"; + status = "okay"; +}; + +&blsp_uart2 { + label = "UART1"; + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; + remote-endpoint = <&adv7533_in>; +}; + +&pm8916_codec { + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + status = "okay"; +}; + +&pm8916_gpios { + gpio-line-names = + "USB_HUB_RESET_N_PM", + "USB_SW_SEL_PM", + "NC", + "NC"; + + usb_hub_reset_pm: usb-hub-reset-pm-state { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + input-disable; + output-high; + }; + + usb_hub_reset_pm_device: usb-hub-reset-pm-device-state { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + input-disable; + output-low; + }; + + usb_sw_sel_pm: usb-sw-sel-pm-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = ; + input-disable; + output-high; + }; + + usb_sw_sel_pm_device: usb-sw-sel-pm-device-state { + pins = "gpio2"; + function = PMIC_GPIO_FUNC_NORMAL; + power-source = ; + input-disable; + output-low; + }; +}; + +&pm8916_mpps { + gpio-line-names = + "NC", + "WLAN_LED_CTRL", + "BT_LED_CTRL", + "NC"; + + pm8916_mpps_leds: pm8916-mpps-state { + pins = "mpp2", "mpp3"; + function = "digital"; + output-low; + }; +}; + +&pm8916_resin { + linux,code = ; + status = "okay"; +}; + +&pm8916_rpm_regulators { + pm8916_l17: l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&sdhc_1 { + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default &sdc2_cd_default>; + pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&sound { + pinctrl-0 = <&cdc_pdm_default &sec_mi2s_default>; + pinctrl-1 = <&cdc_pdm_sleep &sec_mi2s_sleep>; + pinctrl-names = "default", "sleep"; + model = "HMIBSC"; + audio-routing = + "AMIC2", "MIC BIAS Internal2", + "AMIC3", "MIC BIAS External1"; + status = "okay"; + + quaternary-dai-link { + link-name = "ADV7533"; + cpu { + sound-dai = <&lpass MI2S_QUATERNARY>; + }; + codec { + sound-dai = <&adv_bridge 0>; + }; + }; + + primary-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&pm8916_codec 0>; + }; + }; + + tertiary-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&pm8916_codec 1>; + }; + }; +}; + +&tlmm { + pinctrl-0 = <&uart1_mux0_rs232_high &uart1_mux1_rs232_low>; + pinctrl-names = "default"; + + adv7533_int_active: adv533-int-active-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + adv7533_int_suspend: adv7533-int-suspend-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + adv7533_switch_active: adv7533-switch-active-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + adv7533_switch_suspend: adv7533-switch-suspend-state { + pins = "gpio32"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + msm_key_volp_n_default: msm-key-volp-n-default-state { + pins = "gpio107"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + sdc2_cd_default: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + /* + * UART1 being the debug console supports various modes of + * operation (RS-232/485/422) controlled via GPIOs configured + * mux as follows: + * + * gpio100 gpio99 UART mode + * 0 0 loopback + * 0 1 RS-232 + * 1 0 RS-485 + * 1 1 RS-422 + * + * The default mode configured here is RS-232 mode. + */ + uart1_mux0_rs232_high: uart1-mux0-rs232-state { + bootph-all; + pins = "gpio99"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + + uart1_mux1_rs232_low: uart1-mux1-rs232-state { + bootph-all; + pins = "gpio100"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-low; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>; + pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>; + pinctrl-names = "default", "device"; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +}; + +&wcnss { + firmware-name = "qcom/apq8016/wcnss.mbn"; + status = "okay"; +}; + +&wcnss_ctrl { + firmware-name = "qcom/apq8016/WCNSS_qcom_wlan_nv_sbc.bin"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3620"; +}; + +&wcnss_mem { + status = "okay"; +}; + +/* PINCTRL - additions to nodes defined in msm8916.dtsi */ + +/* + * 2mA drive strength is not enough when connecting multiple + * I2C devices with different pull up resistors. + */ +&blsp_i2c4_default { + drive-strength = <16>; +}; + +&blsp_i2c6_default { + drive-strength = <16>; +}; + +&blsp_uart1_default { + bootph-all; +}; + +/* Enable CoreSight */ +&cti0 { status = "okay"; }; +&cti1 { status = "okay"; }; +&cti12 { status = "okay"; }; +&cti13 { status = "okay"; }; +&cti14 { status = "okay"; }; +&cti15 { status = "okay"; }; +&debug0 { status = "okay"; }; +&debug1 { status = "okay"; }; +&debug2 { status = "okay"; }; +&debug3 { status = "okay"; }; +&etf { status = "okay"; }; +&etm0 { status = "okay"; }; +&etm1 { status = "okay"; }; +&etm2 { status = "okay"; }; +&etm3 { status = "okay"; }; +&etr { status = "okay"; }; +&funnel0 { status = "okay"; }; +&funnel1 { status = "okay"; }; +&replicator { status = "okay"; }; +&stm { status = "okay"; }; +&tpiu { status = "okay"; }; diff --git a/board/schneider/hmibsc/MAINTAINERS b/board/schneider/hmibsc/MAINTAINERS new file mode 100644 index 00000000000..0f31bbda966 --- /dev/null +++ b/board/schneider/hmibsc/MAINTAINERS @@ -0,0 +1,6 @@ +HMIBSC BOARD +M: Sumit Garg +S: Maintained +F: board/schneider/hmibsc/ +F: include/configs/hmibsc.h +F: configs/hmibsc_defconfig diff --git a/configs/hmibsc_defconfig b/configs/hmibsc_defconfig new file mode 100644 index 00000000000..c41ed3d5925 --- /dev/null +++ b/configs/hmibsc_defconfig @@ -0,0 +1,86 @@ +CONFIG_ARM=y +CONFIG_SYS_BOARD="hmibsc" +CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y +CONFIG_ARCH_SNAPDRAGON=y +CONFIG_TEXT_BASE=0x8f600000 +CONFIG_SYS_MALLOC_LEN=0x802000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x8007fff0 +CONFIG_ENV_SIZE=0x2000 +CONFIG_ENV_OFFSET=0x0 +CONFIG_DEFAULT_DEVICE_TREE="apq8016-schneider-hmibsc" +# CONFIG_OF_UPSTREAM is not set +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_IDENT_STRING="\nSchneider Electric-HMIBSC" +CONFIG_SYS_LOAD_ADDR=0x80080000 +CONFIG_REMAKE_ELF=y +# CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_FIT=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_CBSIZE=2048 +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +CONFIG_SYS_PROMPT="hmibsc => " +CONFIG_SYS_MAXARGS=64 +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_FS_GENERIC=y +# CONFIG_CMD_IMI is not set +CONFIG_CMD_MD5SUM=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PART=y +CONFIG_CMD_USB=y +CONFIG_BOOTP_BOOTFILESIZE=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_ENV_FLAGS=y +CONFIG_CMD_ENV_EXISTS=y +CONFIG_CMD_NVEDIT_INFO=y +CONFIG_ENV_WRITEABLE_LIST=y +CONFIG_ENV_ACCESS_IGNORE_FORCE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_MMC_ENV_PART=2 +CONFIG_BUTTON_QCOM_PMIC=y +CONFIG_CLK=y +CONFIG_CLK_QCOM_APQ8016=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x91000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_MSM_GPIO=y +CONFIG_QCOM_PMIC_GPIO=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_MSM=y +CONFIG_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_QCOM_APQ8016=y +CONFIG_DM_PMIC=y +CONFIG_PMIC_QCOM=y +CONFIG_MSM_SERIAL=y +CONFIG_SPMI_MSM=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_MSM=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_PHYLIB=y +CONFIG_USB_ETHER_LAN75XX=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x18d1 +CONFIG_USB_GADGET_PRODUCT_NUM=0xd00d +CONFIG_CI_UDC=y diff --git a/doc/board/index.rst b/doc/board/index.rst index f0a11f84ccc..428faa810be 100644 --- a/doc/board/index.rst +++ b/doc/board/index.rst @@ -42,6 +42,7 @@ Board-specific doc renesas/index rockchip/index samsung/index + schneider/index sielaff/index siemens/index sifive/index diff --git a/doc/board/schneider/hmibsc.rst b/doc/board/schneider/hmibsc.rst new file mode 100644 index 00000000000..f09fb5af1b3 --- /dev/null +++ b/doc/board/schneider/hmibsc.rst @@ -0,0 +1,45 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. sectionauthor:: Sumit Garg + +HMIBSC +====== + +The HMIBSC is an IIoT Edge Box Core board based on the Qualcomm APQ8016E SoC. +More information can be found on the `SE product page`_. + +U-Boot can be used as a replacement for Qualcomm's original Android bootloader +(a fork of Little Kernel/LK). Like LK, it is installed directly into the ``aboot`` +partition. Note that the U-Boot port used to be loaded as an Android boot image +through LK. This is no longer the case, now U-Boot can replace LK entirely. + +.. _SE product page: https://www.se.com/us/en/product/HMIBSCEA53D1L0T/iiot-edge-box-core-harmony-ipc-emmc-dc-linux-tpm/ + +Build steps +----------- + +First, setup ``CROSS_COMPILE`` for aarch64. Then, build U-Boot for ``hmibsc``:: + + $ export CROSS_COMPILE= + $ make hmibsc_defconfig + $ make + +This will build ``u-boot.elf`` in the configured output directory. + +Installation +------------ + +Although the HMIBSC does not have secure boot set up by default, the firmware +still expects firmware ELF images to be "signed". The signature does not provide +any security in this case, but it provides the firmware with some required +metadata. + +To "sign" ``u-boot.elf`` you can use e.g. `qtestsign`_:: + + $ ./qtestsign.py aboot u-boot.elf + +Then install the resulting ``u-boot-test-signed.mbn`` to the ``aboot`` partition +on your device, e.g. with ``fastboot flash aboot u-boot-test-signed.mbn``. + +U-Boot should be running after a reboot (``fastboot reboot``). + +.. _qtestsign: https://github.com/msm8916-mainline/qtestsign diff --git a/doc/board/schneider/index.rst b/doc/board/schneider/index.rst new file mode 100644 index 00000000000..55792ed3100 --- /dev/null +++ b/doc/board/schneider/index.rst @@ -0,0 +1,9 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +Schneider Electric +================== + +.. toctree:: + :maxdepth: 2 + + hmibsc diff --git a/include/configs/hmibsc.h b/include/configs/hmibsc.h new file mode 100644 index 00000000000..66dfa549ce1 --- /dev/null +++ b/include/configs/hmibsc.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Board configuration file for HMIBSC + * + * (C) Copyright 2024 Sumit Garg + */ + +#ifndef __CONFIGS_HMIBSC_H +#define __CONFIGS_HMIBSC_H + +/* PHY needs a longer aneg time */ +#define PHY_ANEG_TIMEOUT 8000 + +#define HMIBSC_BOOTCOMMAND \ + "setenv devtype mmc; setenv devnum 0; " \ + "test -n \"${BOOT_ORDER}\" || setenv BOOT_ORDER \"A B\"; " \ + "test -n \"${BOOT_A_LEFT}\" || setenv BOOT_A_LEFT 3; " \ + "test -n \"${BOOT_B_LEFT}\" || setenv BOOT_B_LEFT 3; " \ + "setenv raucslot; " \ + "for BOOT_SLOT in \"${BOOT_ORDER}\"; do " \ + " if test \"x${raucslot}\" != \"x\"; then " \ + " echo \"skip remaining slots...\"; " \ + " elif test \"x${BOOT_SLOT}\" = \"xA\"; then " \ + " if test ${BOOT_A_LEFT} -gt 0; then " \ + " setexpr BOOT_A_LEFT ${BOOT_A_LEFT} - 1; " \ + " echo \"Found valid RAUC slot A\"; " \ + " setenv raucslot \"rauc.slot=A\"; " \ + " setenv raucpart A; setenv distro_bootpart 6;" \ + " fi; " \ + " elif test \"x${BOOT_SLOT}\" = \"xB\"; then " \ + " if test ${BOOT_B_LEFT} -gt 0; then " \ + " setexpr BOOT_B_LEFT ${BOOT_B_LEFT} - 1; " \ + " echo \"Found valid RAUC slot B\"; " \ + " setenv raucslot \"rauc.slot=B\"; " \ + " setenv raucpart B; setenv distro_bootpart 7;" \ + " fi; " \ + " fi; " \ + "done; " \ + "if test -n \"${raucslot}\"; then " \ + " setenv bootargs console=ttyMSM1 root=PARTLABEL=rootfs_${raucpart} rw rootwait ${raucslot}; " \ + " saveenv; " \ + "else " \ + " echo \"No valid RAUC slot found. Resetting tries to 3\"; " \ + " setenv BOOT_A_LEFT 3; " \ + " setenv BOOT_B_LEFT 3; " \ + " saveenv; " \ + " reset; " \ + "fi; " \ + "load ${devtype} ${devnum}:${distro_bootpart} ${loadaddr} /boot/fitImage && bootm" + +#define CFG_EXTRA_ENV_SETTINGS \ + "loadaddr=0x90000000\0" \ + "bootcmd=" HMIBSC_BOOTCOMMAND "\0" + +#define CFG_ENV_FLAGS_LIST_STATIC "BOOT_A_LEFT:dw,BOOT_B_LEFT:dw,BOOT_ORDER:sw" + +#endif