From patchwork Thu Apr 18 12:11:07 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 790335 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 76DF015AAAD; Thu, 18 Apr 2024 12:11:32 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1713442292; cv=none; b=ZnlrweNQL6Yif2nqoWTsFq+SqbNPGlktPkfjJCIlGMnUJ7cEVZcdKf2xHSMAxKP3RmBWNHJ6tFIS37CH3EJBHllhyPyAMm0ZAD1ZSYyKSDPcPKGaA2GqGpFFW7chuUar3GbZdbWIaNmp8hVlupYEDRd/U6SqVXyE/xeoFTq5O3c= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1713442292; c=relaxed/simple; bh=c/MT+AMhCQIXSyAtBVoTFqA8p2WB+lbPLHiOYATO+AA=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=TI50Sm/arz+yFggS93NL4TFCnB++2P910DB4MX9s/I6DU9B5NtbDETO/B+fihsNJrk7BV9j32wbeEE+zkORR1KP7MZuNYU6TzMqH2SBTMTIeHObK0dm6pjlqsFb4E1/V82i2v81Hy+YsZx07kFKIbNqWUhgSibcMAOJOtndxtNs= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=WQfO5rx7; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="WQfO5rx7" Received: by smtp.kernel.org (Postfix) with ESMTPSA id 3F1E1C3277B; Thu, 18 Apr 2024 12:11:29 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1713442292; bh=c/MT+AMhCQIXSyAtBVoTFqA8p2WB+lbPLHiOYATO+AA=; h=From:List-Id:To:Cc:Subject:Date:In-Reply-To:References:From; b=WQfO5rx7eRRfuFT3FlKxQD+K+Uj9UKytMNA+y16ouFH0SQdNMr1X3b/u1/YgRwdJx rdXhiJSlpcrBA8ylUBtEfj/LgeoiW7CwTND65ltBn+nxDQy8LXHgwae2VR+o8O3kXq CCw6KnMwiChB7zm0uON/KKD5ec0gPmHQRjZ8oA0VYYJ3YJw0YFcvu3CaOL4Te5rVqJ S4pKHYqyQX6bvyaRJiA2OP8TeVR9y38Lp13ogzP7Aa/+udYEQ9GWdx29oJCX04+/S+ b92eg6oUQfqBtMaeWzU82hSlCkng2+SBjQvGZ9UZ0o+DtMbsVlNXJmjdX9/HgoSr8F l6w1GlXs9/ZqA== From: =?utf-8?q?Marek_Beh=C3=BAn?= To: Gregory CLEMENT , Arnd Bergmann , soc@kernel.org, Linus Walleij , Bartosz Golaszewski , Andy Shevchenko , linux-gpio@vger.kernel.org, Alessandro Zummo , Alexandre Belloni , linux-rtc@vger.kernel.org, Wim Van Sebroeck , Guenter Roeck , linux-watchdog@vger.kernel.org Cc: arm@kernel.org, =?utf-8?q?Marek_Beh=C3=BAn?= Subject: [PATCH v6 02/11] platform: cznic: Add preliminary support for Turris Omnia MCU Date: Thu, 18 Apr 2024 14:11:07 +0200 Message-ID: <20240418121116.22184-3-kabel@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240418121116.22184-1-kabel@kernel.org> References: <20240418121116.22184-1-kabel@kernel.org> Precedence: bulk X-Mailing-List: linux-gpio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Add the basic skeleton for a new platform driver for the microcontroller found on the Turris Omnia board. Signed-off-by: Marek Behún --- .../sysfs-bus-i2c-devices-turris-omnia-mcu | 81 ++++ MAINTAINERS | 3 + drivers/platform/Kconfig | 2 + drivers/platform/Makefile | 1 + drivers/platform/cznic/Kconfig | 26 ++ drivers/platform/cznic/Makefile | 4 + .../platform/cznic/turris-omnia-mcu-base.c | 376 ++++++++++++++++++ drivers/platform/cznic/turris-omnia-mcu.h | 50 +++ include/linux/turris-omnia-mcu-interface.h | 249 ++++++++++++ 9 files changed, 792 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu create mode 100644 drivers/platform/cznic/Kconfig create mode 100644 drivers/platform/cznic/Makefile create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h create mode 100644 include/linux/turris-omnia-mcu-interface.h diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu new file mode 100644 index 000000000000..ff5e7cb00206 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu @@ -0,0 +1,81 @@ +What: /sys/bus/i2c/devices//board_revision +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains board revision number. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %u. + +What: /sys/bus/i2c/devices//first_mac_address +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains device first MAC address. Each Turris Omnia is + allocated 3 MAC addresses. The two additional addresses are + computed from the first one by incrementing it. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %pM. + +What: /sys/bus/i2c/devices//fw_features +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Newer versions of the microcontroller firmware report the + features they support. These can be read from this file. If the + MCU firmware is too old, this file reads 0x0. + + Format: 0x%x. + +What: /sys/bus/i2c/devices//fw_version_hash_application +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains the version hash (commit hash) of the application + part of the microcontroller firmware. + + Format: %s. + +What: /sys/bus/i2c/devices//fw_version_hash_bootloader +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains the version hash (commit hash) of the bootloader + part of the microcontroller firmware. + + Format: %s. + +What: /sys/bus/i2c/devices//mcu_type +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains the microcontroller type (STM32, GD32, MKL). + + Format: %s. + +What: /sys/bus/i2c/devices//reset_selector +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains the selected factory reset level, determined by + how long the rear reset button was held by the user during board + reset. + + Format: %i. + +What: /sys/bus/i2c/devices//serial_number +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RO) Contains the 64 bit long board serial number in hexadecimal + format. + + Only available if board information is burned in the MCU (older + revisions have board information burned in the ATSHA204-A chip). + + Format: %016X. diff --git a/MAINTAINERS b/MAINTAINERS index 23637ff1e0bc..b37f7ca81785 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2139,6 +2139,7 @@ M: Marek Behún S: Maintained W: https://www.turris.cz/ F: Documentation/ABI/testing/debugfs-moxtet +F: Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu F: Documentation/ABI/testing/sysfs-bus-moxtet-devices F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm F: Documentation/devicetree/bindings/arm/cznic,turris-omnia-mcu.yaml @@ -2152,10 +2153,12 @@ F: drivers/firmware/turris-mox-rwtm.c F: drivers/gpio/gpio-moxtet.c F: drivers/leds/leds-turris-omnia.c F: drivers/mailbox/armada-37xx-rwtm-mailbox.c +F: drivers/platform/cznic/ F: drivers/watchdog/armada_37xx_wdt.c F: include/dt-bindings/bus/moxtet.h F: include/linux/armada-37xx-rwtm-mailbox.h F: include/linux/moxtet.h +F: include/linux/turris-omnia-mcu-interface.h ARM/FARADAY FA526 PORT M: Hans Ulli Kroll diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig index 868b20361769..fef907a94001 100644 --- a/drivers/platform/Kconfig +++ b/drivers/platform/Kconfig @@ -7,6 +7,8 @@ source "drivers/platform/goldfish/Kconfig" source "drivers/platform/chrome/Kconfig" +source "drivers/platform/cznic/Kconfig" + source "drivers/platform/mellanox/Kconfig" source "drivers/platform/olpc/Kconfig" diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile index 41640172975a..8bf189264374 100644 --- a/drivers/platform/Makefile +++ b/drivers/platform/Makefile @@ -10,4 +10,5 @@ obj-$(CONFIG_MIPS) += mips/ obj-$(CONFIG_OLPC_EC) += olpc/ obj-$(CONFIG_GOLDFISH) += goldfish/ obj-$(CONFIG_CHROME_PLATFORMS) += chrome/ +obj-$(CONFIG_CZNIC_PLATFORMS) += cznic/ obj-$(CONFIG_SURFACE_PLATFORMS) += surface/ diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig new file mode 100644 index 000000000000..f8560ff9c1af --- /dev/null +++ b/drivers/platform/cznic/Kconfig @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.rst. +# + +menuconfig CZNIC_PLATFORMS + bool "Platform support for CZ.NIC's Turris hardware" + depends on MACH_ARMADA_38X || COMPILE_TEST + help + Say Y here to be able to choose driver support for CZ.NIC's Turris + devices. This option alone does not add any kernel code. + +if CZNIC_PLATFORMS + +config TURRIS_OMNIA_MCU + tristate "Turris Omnia MCU driver" + depends on MACH_ARMADA_38X || COMPILE_TEST + depends on I2C + help + Say Y here to add support for the features implemented by the + microcontroller on the CZ.NIC's Turris Omnia SOHO router. + To compile this driver as a module, choose M here; the module will be + called turris-omnia-mcu. + +endif # CZNIC_PLATFORMS diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile new file mode 100644 index 000000000000..31adca73bb94 --- /dev/null +++ b/drivers/platform/cznic/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o +turris-omnia-mcu-y := turris-omnia-mcu-base.o diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c new file mode 100644 index 000000000000..8893c990853a --- /dev/null +++ b/drivers/platform/cznic/turris-omnia-mcu-base.c @@ -0,0 +1,376 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CZ.NIC's Turris Omnia MCU driver + * + * 2024 by Marek Behún + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "turris-omnia-mcu.h" + +#define OMNIA_FW_VERSION_LEN 20 +#define OMNIA_FW_VERSION_HEX_LEN (2 * OMNIA_FW_VERSION_LEN + 1) +#define OMNIA_BOARD_INFO_LEN 16 + +int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply, + unsigned int len) +{ + struct i2c_msg msgs[2]; + int ret; + + msgs[0].addr = client->addr; + msgs[0].flags = 0; + msgs[0].len = 1; + msgs[0].buf = &cmd; + msgs[1].addr = client->addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = len; + msgs[1].buf = reply; + + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + if (ret != ARRAY_SIZE(msgs)) + return -EIO; + + return 0; +} + +static int omnia_get_version_hash(struct omnia_mcu *mcu, bool bootloader, + u8 version[static OMNIA_FW_VERSION_HEX_LEN]) +{ + u8 reply[OMNIA_FW_VERSION_LEN]; + int err; + + err = omnia_cmd_read(mcu->client, + bootloader ? CMD_GET_FW_VERSION_BOOT + : CMD_GET_FW_VERSION_APP, + reply, sizeof(reply)); + if (err) + return err; + + version[OMNIA_FW_VERSION_HEX_LEN - 1] = '\0'; + bin2hex(version, reply, OMNIA_FW_VERSION_LEN); + + return 0; +} + +static ssize_t fw_version_hash_show(struct device *dev, char *buf, + bool bootloader) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + u8 version[OMNIA_FW_VERSION_HEX_LEN]; + int err; + + err = omnia_get_version_hash(mcu, bootloader, version); + if (err) + return err; + + return sysfs_emit(buf, "%s\n", version); +} + +static ssize_t fw_version_hash_application_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return fw_version_hash_show(dev, buf, false); +} +static DEVICE_ATTR_RO(fw_version_hash_application); + +static ssize_t fw_version_hash_bootloader_show(struct device *dev, + struct device_attribute *a, + char *buf) +{ + return fw_version_hash_show(dev, buf, true); +} +static DEVICE_ATTR_RO(fw_version_hash_bootloader); + +static ssize_t fw_features_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + return sysfs_emit(buf, "0x%x\n", mcu->features); +} +static DEVICE_ATTR_RO(fw_features); + +static ssize_t mcu_type_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%s\n", mcu->type); +} +static DEVICE_ATTR_RO(mcu_type); + +static ssize_t reset_selector_show(struct device *dev, + struct device_attribute *a, char *buf) +{ + int ret; + + ret = omnia_cmd_read_u8(to_i2c_client(dev), CMD_GET_RESET); + if (ret < 0) + return ret; + + return sysfs_emit(buf, "%d\n", ret); +} +static DEVICE_ATTR_RO(reset_selector); + +static ssize_t serial_number_show(struct device *dev, + struct device_attribute *a, char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%016llX\n", mcu->board_serial_number); +} +static DEVICE_ATTR_RO(serial_number); + +static ssize_t first_mac_address_show(struct device *dev, + struct device_attribute *a, char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%pM\n", mcu->board_first_mac); +} +static DEVICE_ATTR_RO(first_mac_address); + +static ssize_t board_revision_show(struct device *dev, + struct device_attribute *a, char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%u\n", mcu->board_revision); +} +static DEVICE_ATTR_RO(board_revision); + +static struct attribute *omnia_mcu_base_attrs[] = { + &dev_attr_fw_version_hash_application.attr, + &dev_attr_fw_version_hash_bootloader.attr, + &dev_attr_fw_features.attr, + &dev_attr_mcu_type.attr, + &dev_attr_reset_selector.attr, + &dev_attr_serial_number.attr, + &dev_attr_first_mac_address.attr, + &dev_attr_board_revision.attr, + NULL +}; + +static umode_t omnia_mcu_base_attrs_visible(struct kobject *kobj, + struct attribute *a, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct omnia_mcu *mcu = dev_get_drvdata(dev); + umode_t mode = a->mode; + + if ((a == &dev_attr_serial_number.attr || + a == &dev_attr_first_mac_address.attr || + a == &dev_attr_board_revision.attr) && + !(mcu->features & FEAT_BOARD_INFO)) + mode = 0; + + return mode; +} + +static const struct attribute_group omnia_mcu_base_group = { + .attrs = omnia_mcu_base_attrs, + .is_visible = omnia_mcu_base_attrs_visible, +}; + +static const struct attribute_group *omnia_mcu_groups[] = { + &omnia_mcu_base_group, + NULL +}; + +static void omnia_mcu_print_version_hash(struct omnia_mcu *mcu, bool bootloader) +{ + const char *type = bootloader ? "bootloader" : "application"; + struct device *dev = &mcu->client->dev; + u8 version[OMNIA_FW_VERSION_HEX_LEN]; + int err; + + err = omnia_get_version_hash(mcu, bootloader, version); + if (err) { + dev_err(dev, "Cannot read MCU %s firmware version: %d\n", type, + err); + return; + } + + dev_info(dev, "MCU %s firmware version hash: %s\n", type, version); +} + +static const char *omnia_status_to_mcu_type(uint16_t status) +{ + switch (status & STS_MCU_TYPE_MASK) { + case STS_MCU_TYPE_STM32: + return "STM32"; + case STS_MCU_TYPE_GD32: + return "GD32"; + case STS_MCU_TYPE_MKL: + return "MKL"; + default: + return "unknown"; + } +} + +static void omnia_info_missing_feature(struct device *dev, const char *feature) +{ + dev_info(dev, + "Your board's MCU firmware does not support the %s feature.\n", + feature); +} + +static int omnia_mcu_read_features(struct omnia_mcu *mcu) +{ + static const struct { + uint16_t mask; + const char *name; + } features[] = { + { FEAT_EXT_CMDS, "extended control and status" }, + { FEAT_WDT_PING, "watchdog pinging" }, + { FEAT_LED_STATE_EXT_MASK, "peripheral LED pins reading" }, + { FEAT_NEW_INT_API, "new interrupt API" }, + { FEAT_POWEROFF_WAKEUP, "poweroff and wakeup" }, + { FEAT_TRNG, "true random number generator" }, + }; + struct device *dev = &mcu->client->dev; + bool suggest_fw_upgrade = false; + int status; + + /* status word holds MCU type, which we need below */ + status = omnia_cmd_read_u16(mcu->client, CMD_GET_STATUS_WORD); + if (status < 0) + return status; + + /* check whether MCU firmware supports the CMD_GET_FEAUTRES command */ + if (status & STS_FEATURES_SUPPORTED) { + __le32 reply; + int ret; + + /* try read 32-bit features */ + ret = omnia_cmd_read(mcu->client, CMD_GET_FEATURES, &reply, + sizeof(reply)); + if (ret) { + /* try read 16-bit features */ + ret = omnia_cmd_read_u16(mcu->client, CMD_GET_FEATURES); + if (ret < 0) + return ret; + + mcu->features = ret; + } else { + mcu->features = le32_to_cpu(reply); + + if (mcu->features & FEAT_FROM_BIT_16_INVALID) + mcu->features &= GENMASK(15, 0); + } + } else { + omnia_info_missing_feature(dev, "feature reading"); + suggest_fw_upgrade = true; + } + + mcu->type = omnia_status_to_mcu_type(status); + dev_info(dev, "MCU type %s%s\n", mcu->type, + (mcu->features & FEAT_PERIPH_MCU) ? + ", with peripheral resets wired" : ""); + + omnia_mcu_print_version_hash(mcu, true); + + if (mcu->features & FEAT_BOOTLOADER) + dev_warn(dev, + "MCU is running bootloader firmware. Was firmware upgrade interrupted?\n"); + else + omnia_mcu_print_version_hash(mcu, false); + + for (unsigned int i = 0; i < ARRAY_SIZE(features); i++) { + if (mcu->features & features[i].mask) + continue; + + omnia_info_missing_feature(dev, features[i].name); + suggest_fw_upgrade = true; + } + + if (suggest_fw_upgrade) + dev_info(dev, + "Consider upgrading MCU firmware with the omnia-mcutool utility.\n"); + + return 0; +} + +static int omnia_mcu_read_board_info(struct omnia_mcu *mcu) +{ + u8 reply[1 + OMNIA_BOARD_INFO_LEN]; + int err; + + err = omnia_cmd_read(mcu->client, CMD_BOARD_INFO_GET, reply, + sizeof(reply)); + if (err) + return err; + + if (reply[0] != OMNIA_BOARD_INFO_LEN) + return -EIO; + + mcu->board_serial_number = get_unaligned_le64(&reply[1]); + memcpy(mcu->board_first_mac, &reply[9], ETH_ALEN); + mcu->board_revision = reply[15]; + + return 0; +} + +static int omnia_mcu_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct omnia_mcu *mcu; + int err; + + if (!client->irq) + return dev_err_probe(dev, -EINVAL, "IRQ resource not found\n"); + + mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL); + if (!mcu) + return -ENOMEM; + + mcu->client = client; + i2c_set_clientdata(client, mcu); + + err = omnia_mcu_read_features(mcu); + if (err) + return dev_err_probe(dev, err, + "Cannot determine MCU supported features\n"); + + if (mcu->features & FEAT_BOARD_INFO) { + err = omnia_mcu_read_board_info(mcu); + if (err) + return dev_err_probe(dev, err, + "Cannot read board info\n"); + } + + return 0; +} + +static const struct of_device_id of_omnia_mcu_match[] = { + { .compatible = "cznic,turris-omnia-mcu" }, + {} +}; + +static struct i2c_driver omnia_mcu_driver = { + .probe = omnia_mcu_probe, + .driver = { + .name = "turris-omnia-mcu", + .of_match_table = of_omnia_mcu_match, + .dev_groups = omnia_mcu_groups, + }, +}; +module_i2c_driver(omnia_mcu_driver); + +MODULE_AUTHOR("Marek Behun "); +MODULE_DESCRIPTION("CZ.NIC's Turris Omnia MCU"); +MODULE_LICENSE("GPL"); diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h new file mode 100644 index 000000000000..5b21fbca8fe1 --- /dev/null +++ b/drivers/platform/cznic/turris-omnia-mcu.h @@ -0,0 +1,50 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CZ.NIC's Turris Omnia MCU driver + * + * 2024 by Marek Behún + */ + +#ifndef __TURRIS_OMNIA_MCU_H +#define __TURRIS_OMNIA_MCU_H + +#include +#include +#include +#include + +struct omnia_mcu { + struct i2c_client *client; + const char *type; + u32 features; + + /* board information */ + u64 board_serial_number; + u8 board_first_mac[ETH_ALEN]; + u8 board_revision; +}; + +int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply, + unsigned int len); + +static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd) +{ + __le16 reply; + int err; + + err = omnia_cmd_read(client, cmd, &reply, sizeof(reply)); + + return err ?: le16_to_cpu(reply); +} + +static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd) +{ + u8 reply; + int err; + + err = omnia_cmd_read(client, cmd, &reply, sizeof(reply)); + + return err ?: reply; +} + +#endif /* __TURRIS_OMNIA_MCU_H */ diff --git a/include/linux/turris-omnia-mcu-interface.h b/include/linux/turris-omnia-mcu-interface.h new file mode 100644 index 000000000000..88f8490b5897 --- /dev/null +++ b/include/linux/turris-omnia-mcu-interface.h @@ -0,0 +1,249 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * CZ.NIC's Turris Omnia MCU I2C interface commands definitions + * + * 2024 by Marek Behún + */ + +#ifndef __TURRIS_OMNIA_MCU_INTERFACE_H +#define __TURRIS_OMNIA_MCU_INTERFACE_H + +#include +#include + +enum omnia_commands_e { + CMD_GET_STATUS_WORD = 0x01, /* slave sends status word back */ + CMD_GENERAL_CONTROL = 0x02, + CMD_LED_MODE = 0x03, /* default/user */ + CMD_LED_STATE = 0x04, /* LED on/off */ + CMD_LED_COLOR = 0x05, /* LED number + RED + GREEN + BLUE */ + CMD_USER_VOLTAGE = 0x06, + CMD_SET_BRIGHTNESS = 0x07, + CMD_GET_BRIGHTNESS = 0x08, + CMD_GET_RESET = 0x09, + CMD_GET_FW_VERSION_APP = 0x0A, /* 20B git hash number */ + CMD_SET_WATCHDOG_STATE = 0x0B, /* 0 - disable + * 1 - enable / ping + * after boot watchdog is started + * with 2 minutes timeout + */ + + /* CMD_WATCHDOG_STATUS = 0x0C, not implemented anymore */ + + CMD_GET_WATCHDOG_STATE = 0x0D, + CMD_GET_FW_VERSION_BOOT = 0x0E, /* 20B git hash number */ + CMD_GET_FW_CHECKSUM = 0x0F, /* 4B length, 4B checksum */ + + /* available if FEATURES_SUPPORTED bit set in status word */ + CMD_GET_FEATURES = 0x10, + + /* available if EXT_CMD bit set in features */ + CMD_GET_EXT_STATUS_DWORD = 0x11, + CMD_EXT_CONTROL = 0x12, + CMD_GET_EXT_CONTROL_STATUS = 0x13, + + /* available if NEW_INT_API bit set in features */ + CMD_GET_INT_AND_CLEAR = 0x14, + CMD_GET_INT_MASK = 0x15, + CMD_SET_INT_MASK = 0x16, + + /* available if FLASHING bit set in features */ + CMD_FLASH = 0x19, + + /* available if WDT_PING bit set in features */ + CMD_SET_WDT_TIMEOUT = 0x20, + CMD_GET_WDT_TIMELEFT = 0x21, + + /* available if POWEROFF_WAKEUP bit set in features */ + CMD_SET_WAKEUP = 0x22, + CMD_GET_UPTIME_AND_WAKEUP = 0x23, + CMD_POWER_OFF = 0x24, + + /* available if USB_OVC_PROT_SETTING bit set in features */ + CMD_SET_USB_OVC_PROT = 0x25, + CMD_GET_USB_OVC_PROT = 0x26, + + /* available if TRNG bit set in features */ + CMD_TRNG_COLLECT_ENTROPY = 0x28, + + /* available if CRYPTO bit set in features */ + CMD_CRYPTO_GET_PUBLIC_KEY = 0x29, + CMD_CRYPTO_SIGN_MESSAGE = 0x2A, + CMD_CRYPTO_COLLECT_SIGNATURE = 0x2B, + + /* available if BOARD_INFO it set in features */ + CMD_BOARD_INFO_GET = 0x2C, + CMD_BOARD_INFO_BURN = 0x2D, + + /* available only at address 0x2b (led-controller) */ + /* available only if LED_GAMMA_CORRECTION bit set in features */ + CMD_SET_GAMMA_CORRECTION = 0x30, + CMD_GET_GAMMA_CORRECTION = 0x31, + + /* available only at address 0x2b (led-controller) */ + /* available only if PER_LED_CORRECTION bit set in features */ + /* available only if FROM_BIT_16_INVALID bit NOT set in features */ + CMD_SET_LED_CORRECTIONS = 0x32, + CMD_GET_LED_CORRECTIONS = 0x33, +}; + +enum omnia_flashing_commands_e { + FLASH_CMD_UNLOCK = 0x01, + FLASH_CMD_SIZE_AND_CSUM = 0x02, + FLASH_CMD_PROGRAM = 0x03, + FLASH_CMD_RESET = 0x04, +}; + +enum omnia_sts_word_e { + STS_MCU_TYPE_MASK = GENMASK(1, 0), + STS_MCU_TYPE_STM32 = 0 << 0, + STS_MCU_TYPE_GD32 = 1 << 0, + STS_MCU_TYPE_MKL = 2 << 0, + STS_FEATURES_SUPPORTED = BIT(2), + STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3), + STS_CARD_DET = BIT(4), + STS_MSATA_IND = BIT(5), + STS_USB30_OVC = BIT(6), + STS_USB31_OVC = BIT(7), + STS_USB30_PWRON = BIT(8), + STS_USB31_PWRON = BIT(9), + STS_ENABLE_4V5 = BIT(10), + STS_BUTTON_MODE = BIT(11), + STS_BUTTON_PRESSED = BIT(12), + STS_BUTTON_COUNTER_MASK = GENMASK(15, 13) +}; + +enum omnia_ctl_byte_e { + CTL_LIGHT_RST = BIT(0), + CTL_HARD_RST = BIT(1), + /* BIT(2) is currently reserved */ + CTL_USB30_PWRON = BIT(3), + CTL_USB31_PWRON = BIT(4), + CTL_ENABLE_4V5 = BIT(5), + CTL_BUTTON_MODE = BIT(6), + CTL_BOOTLOADER = BIT(7) +}; + +enum omnia_features_e { + FEAT_PERIPH_MCU = BIT(0), + FEAT_EXT_CMDS = BIT(1), + FEAT_WDT_PING = BIT(2), + FEAT_LED_STATE_EXT_MASK = GENMASK(4, 3), + FEAT_LED_STATE_EXT = 1 << 3, + FEAT_LED_STATE_EXT_V32 = 2 << 3, + FEAT_LED_GAMMA_CORRECTION = BIT(5), + FEAT_NEW_INT_API = BIT(6), + FEAT_BOOTLOADER = BIT(7), + FEAT_FLASHING = BIT(8), + FEAT_NEW_MESSAGE_API = BIT(9), + FEAT_BRIGHTNESS_INT = BIT(10), + FEAT_POWEROFF_WAKEUP = BIT(11), + FEAT_CAN_OLD_MESSAGE_API = BIT(12), + FEAT_TRNG = BIT(13), + FEAT_CRYPTO = BIT(14), + FEAT_BOARD_INFO = BIT(15), + + /* + * Orginally the features command replied only 16 bits. If more were + * read, either the I2C transaction failed or 0xff bytes were sent. + * Therefore to consider bits 16 - 31 valid, one bit (20) was reserved + * to be zero. + */ + + /* Bits 16 - 19 correspond to bits 0 - 3 of status word */ + FEAT_MCU_TYPE_MASK = GENMASK(17, 16), + FEAT_MCU_TYPE_STM32 = 0 << 16, + FEAT_MCU_TYPE_GD32 = 1 << 16, + FEAT_MCU_TYPE_MKL = 2 << 16, + FEAT_FEATURES_SUPPORTED = BIT(18), + FEAT_USER_REGULATOR_NOT_SUPPORTED = BIT(19), + + /* must not be set */ + FEAT_FROM_BIT_16_INVALID = BIT(20), + + FEAT_PER_LED_CORRECTION = BIT(21), + FEAT_USB_OVC_PROT_SETTING = BIT(22), +}; + +enum omnia_ext_sts_dword_e { + EXT_STS_SFP_nDET = BIT(0), + EXT_STS_LED_STATES_MASK = GENMASK(31, 12), + EXT_STS_WLAN0_MSATA_LED = BIT(12), + EXT_STS_WLAN1_LED = BIT(13), + EXT_STS_WLAN2_LED = BIT(14), + EXT_STS_WPAN0_LED = BIT(15), + EXT_STS_WPAN1_LED = BIT(16), + EXT_STS_WPAN2_LED = BIT(17), + EXT_STS_WAN_LED0 = BIT(18), + EXT_STS_WAN_LED1 = BIT(19), + EXT_STS_LAN0_LED0 = BIT(20), + EXT_STS_LAN0_LED1 = BIT(21), + EXT_STS_LAN1_LED0 = BIT(22), + EXT_STS_LAN1_LED1 = BIT(23), + EXT_STS_LAN2_LED0 = BIT(24), + EXT_STS_LAN2_LED1 = BIT(25), + EXT_STS_LAN3_LED0 = BIT(26), + EXT_STS_LAN3_LED1 = BIT(27), + EXT_STS_LAN4_LED0 = BIT(28), + EXT_STS_LAN4_LED1 = BIT(29), + EXT_STS_LAN5_LED0 = BIT(30), + EXT_STS_LAN5_LED1 = BIT(31), +}; + +enum omnia_ext_ctl_e { + EXT_CTL_nRES_MMC = BIT(0), + EXT_CTL_nRES_LAN = BIT(1), + EXT_CTL_nRES_PHY = BIT(2), + EXT_CTL_nPERST0 = BIT(3), + EXT_CTL_nPERST1 = BIT(4), + EXT_CTL_nPERST2 = BIT(5), + EXT_CTL_PHY_SFP = BIT(6), + EXT_CTL_PHY_SFP_AUTO = BIT(7), + EXT_CTL_nVHV_CTRL = BIT(8), +}; + +enum omnia_int_e { + INT_CARD_DET = BIT(0), + INT_MSATA_IND = BIT(1), + INT_USB30_OVC = BIT(2), + INT_USB31_OVC = BIT(3), + INT_BUTTON_PRESSED = BIT(4), + INT_SFP_nDET = BIT(5), + INT_BRIGHTNESS_CHANGED = BIT(6), + INT_TRNG = BIT(7), + INT_MESSAGE_SIGNED = BIT(8), + + INT_LED_STATES_MASK = GENMASK(31, 12), + INT_WLAN0_MSATA_LED = BIT(12), + INT_WLAN1_LED = BIT(13), + INT_WLAN2_LED = BIT(14), + INT_WPAN0_LED = BIT(15), + INT_WPAN1_LED = BIT(16), + INT_WPAN2_LED = BIT(17), + INT_WAN_LED0 = BIT(18), + INT_WAN_LED1 = BIT(19), + INT_LAN0_LED0 = BIT(20), + INT_LAN0_LED1 = BIT(21), + INT_LAN1_LED0 = BIT(22), + INT_LAN1_LED1 = BIT(23), + INT_LAN2_LED0 = BIT(24), + INT_LAN2_LED1 = BIT(25), + INT_LAN3_LED0 = BIT(26), + INT_LAN3_LED1 = BIT(27), + INT_LAN4_LED0 = BIT(28), + INT_LAN4_LED1 = BIT(29), + INT_LAN5_LED0 = BIT(30), + INT_LAN5_LED1 = BIT(31), +}; + +enum omnia_cmd_poweroff_e { + CMD_POWER_OFF_POWERON_BUTTON = BIT(0), + CMD_POWER_OFF_MAGIC = 0xdead, +}; + +enum cmd_usb_ovc_prot_e { + CMD_xET_USB_OVC_PROT_PORT_MASK = GENMASK(3, 0), + CMD_xET_USB_OVC_PROT_ENABLE = BIT(4), +}; + +#endif /* __TURRIS_OMNIA_MCU_INTERFACE_H */ From patchwork Thu Apr 18 12:11:08 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Marek_Beh=C3=BAn?= X-Patchwork-Id: 790004 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D192215E814 for ; Thu, 18 Apr 2024 12:11:34 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1713442294; cv=none; b=THNxM7SvAlNvJ0TbkPwDbNzbk0qCJmFuRz0Ynn16hAU7fdPwcozmdsr4bPm6kTnd5wi6VMazriG2SEaru+F0obvUtJPZyrwG2U7bblkeLKXvkhqDTQTNoO8djmc789BmmSyBDuaolgAbiJ7tuRbzC6HmdguLYv5t3m36aOkQysI= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1713442294; c=relaxed/simple; bh=68+48FdzYSgGP79lZnrGa1IsOHs91EaXJ2dRnBc8atg=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=gHSd/gqcUhnbp8EjDH7tIcqnTlDzZzKWm3hEnkwXj7vn23xKHuPMiEZt+M8YDIobWWPobwmFsf5WMaF5oBL0GRwZUGnnbyRRx57dIsSdu9Mg8nv9gHjDMYX9TxkLpwSZ5tJg3YxB9PgnbwHE+hKeXzqXLaNcFIAs1Vo6gB+ciuo= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=s+R0ceWu; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="s+R0ceWu" Received: by smtp.kernel.org (Postfix) with ESMTPSA id 72D7FC32781; Thu, 18 Apr 2024 12:11:32 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1713442294; bh=68+48FdzYSgGP79lZnrGa1IsOHs91EaXJ2dRnBc8atg=; h=From:List-Id:To:Cc:Subject:Date:In-Reply-To:References:From; b=s+R0ceWunn8wG6sZEiijuEHLV97VaIk2p6Vnf/2znNvKl1ZGBKfup1aqTJsiFVadZ l8Z+XzG6qmAOGm35UZu4NeR5EpO/lCetrwhQLM3kcRaZqcovCwpcfueNxJrxPpN7Ya 07ytCRBRskQ+KNPb3NRJPX2/KAlFa5KkdHiPUmVXv7o1e7mqIX23j9Ce7MBxAxlv43 SPoSCxqXGa0sR+H7MJJVRzgbCog/MYqM5FWsB+ocNV2BqnYHt4mbGppH82ZhXZg6uW APOOZISnUAaPgnFNrspOPBNy+CzZIwHdN4vwTWdh+LUwu8m8XWqK5dGXjVa6Rh+yK0 C4aYP8+Nr/CuQ== From: =?utf-8?q?Marek_Beh=C3=BAn?= To: Gregory CLEMENT , Arnd Bergmann , soc@kernel.org, Linus Walleij , Bartosz Golaszewski , Andy Shevchenko , linux-gpio@vger.kernel.org Cc: arm@kernel.org, =?utf-8?q?Marek_Beh=C3=BAn?= Subject: [PATCH v6 03/11] platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs Date: Thu, 18 Apr 2024 14:11:08 +0200 Message-ID: <20240418121116.22184-4-kabel@kernel.org> X-Mailer: git-send-email 2.43.2 In-Reply-To: <20240418121116.22184-1-kabel@kernel.org> References: <20240418121116.22184-1-kabel@kernel.org> Precedence: bulk X-Mailing-List: linux-gpio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Add support for GPIOs connected to the MCU on the Turris Omnia board. This includes: - front button pin - enable pins for USB regulators - MiniPCIe / mSATA card presence pins in MiniPCIe port 0 - LED output pins from WAN ethernet PHY, LAN switch and MiniPCIe ports - on board revisions 32+ also various peripheral resets and another voltage regulator enable pin Signed-off-by: Marek Behún --- .../sysfs-bus-i2c-devices-turris-omnia-mcu | 16 + drivers/platform/cznic/Kconfig | 15 + drivers/platform/cznic/Makefile | 1 + .../platform/cznic/turris-omnia-mcu-base.c | 33 +- .../platform/cznic/turris-omnia-mcu-gpio.c | 1047 +++++++++++++++++ drivers/platform/cznic/turris-omnia-mcu.h | 69 +- 6 files changed, 1165 insertions(+), 16 deletions(-) create mode 100644 drivers/platform/cznic/turris-omnia-mcu-gpio.c diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu index ff5e7cb00206..b27b60d00c87 100644 --- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu +++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu @@ -22,6 +22,22 @@ Description: (RO) Contains device first MAC address. Each Turris Omnia is Format: %pM. +What: /sys/bus/i2c/devices//front_button_mode +Date: July 2024 +KernelVersion: 6.10 +Contact: Marek Behún +Description: (RW) The front button on the Turris Omnia router can be + configured either to change the intensity of all the LEDs on the + front panel, or to send the press event to the CPU as an + interrupt. + + This file switches between these two modes: + - "mcu" makes the button press event be handled by the MCU to + change the LEDs panel intensity. + - "cpu" makes the button press event be handled by the CPU. + + Format: %s. + What: /sys/bus/i2c/devices//fw_features Date: July 2024 KernelVersion: 6.10 diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig index f8560ff9c1af..3a8c3edcd7e6 100644 --- a/drivers/platform/cznic/Kconfig +++ b/drivers/platform/cznic/Kconfig @@ -17,9 +17,24 @@ config TURRIS_OMNIA_MCU tristate "Turris Omnia MCU driver" depends on MACH_ARMADA_38X || COMPILE_TEST depends on I2C + select GPIOLIB + select GPIOLIB_IRQCHIP help Say Y here to add support for the features implemented by the microcontroller on the CZ.NIC's Turris Omnia SOHO router. + The features include: + - GPIO pins + - to get front button press events (the front button can be + configured either to generate press events to the CPU or to change + front LEDs panel brightness) + - to enable / disable USB port voltage regulators and to detect + USB overcurrent + - to detect MiniPCIe / mSATA card presence in MiniPCIe port 0 + - to configure resets of various peripherals on board revisions 32+ + - to enable / disable the VHV voltage regulator to the SOC in order + to be able to program SOC's OTP on board revisions 32+ + - to get input from the LED output pins of the WAN ethernet PHY, LAN + switch and MiniPCIe ports To compile this driver as a module, choose M here; the module will be called turris-omnia-mcu. diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile index 31adca73bb94..53fd8f1777a3 100644 --- a/drivers/platform/cznic/Makefile +++ b/drivers/platform/cznic/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o turris-omnia-mcu-y := turris-omnia-mcu-base.o +turris-omnia-mcu-y += turris-omnia-mcu-gpio.o diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c index 8893c990853a..708b084cb5da 100644 --- a/drivers/platform/cznic/turris-omnia-mcu-base.c +++ b/drivers/platform/cznic/turris-omnia-mcu-base.c @@ -22,25 +22,31 @@ #define OMNIA_FW_VERSION_HEX_LEN (2 * OMNIA_FW_VERSION_LEN + 1) #define OMNIA_BOARD_INFO_LEN 16 -int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply, - unsigned int len) +int omnia_cmd_write_read(const struct i2c_client *client, + void *cmd, unsigned int cmd_len, + void *reply, unsigned int reply_len) { struct i2c_msg msgs[2]; - int ret; + int ret, num; msgs[0].addr = client->addr; msgs[0].flags = 0; - msgs[0].len = 1; - msgs[0].buf = &cmd; - msgs[1].addr = client->addr; - msgs[1].flags = I2C_M_RD; - msgs[1].len = len; - msgs[1].buf = reply; - - ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + msgs[0].len = cmd_len; + msgs[0].buf = cmd; + num = 1; + + if (reply_len) { + msgs[1].addr = client->addr; + msgs[1].flags = I2C_M_RD; + msgs[1].len = reply_len; + msgs[1].buf = reply; + num++; + } + + ret = i2c_transfer(client->adapter, msgs, num); if (ret < 0) return ret; - if (ret != ARRAY_SIZE(msgs)) + if (ret != num) return -EIO; return 0; @@ -188,6 +194,7 @@ static const struct attribute_group omnia_mcu_base_group = { static const struct attribute_group *omnia_mcu_groups[] = { &omnia_mcu_base_group, + &omnia_mcu_gpio_group, NULL }; @@ -353,7 +360,7 @@ static int omnia_mcu_probe(struct i2c_client *client) "Cannot read board info\n"); } - return 0; + return omnia_mcu_register_gpiochip(mcu); } static const struct of_device_id of_omnia_mcu_match[] = { diff --git a/drivers/platform/cznic/turris-omnia-mcu-gpio.c b/drivers/platform/cznic/turris-omnia-mcu-gpio.c new file mode 100644 index 000000000000..b3b203f0d2b9 --- /dev/null +++ b/drivers/platform/cznic/turris-omnia-mcu-gpio.c @@ -0,0 +1,1047 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CZ.NIC's Turris Omnia MCU GPIO and IRQ driver + * + * 2024 by Marek Behún + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "turris-omnia-mcu.h" + +#define CMD_INT_ARG_LEN 8 +#define FRONT_BUTTON_RELEASE_DELAY 50 /* ms */ + +static const char * const omnia_mcu_gpio_templates[64] = { + /* GPIOs with value read from the 16-bit wide status */ + [4] = "gpio%u.MiniPCIe0 Card Detect", + [5] = "gpio%u.MiniPCIe0 mSATA Indicator", + [6] = "gpio%u.Front USB3 port over-current", + [7] = "gpio%u.Rear USB3 port over-current", + [8] = "gpio%u.Front USB3 port power", + [9] = "gpio%u.Rear USB3 port power", + [12] = "gpio%u.Front Button", + + /* GPIOs with value read from the 32-bit wide extended status */ + [16] = "gpio%u.SFP nDET", + [28] = "gpio%u.MiniPCIe0 LED", + [29] = "gpio%u.MiniPCIe1 LED", + [30] = "gpio%u.MiniPCIe2 LED", + [31] = "gpio%u.MiniPCIe0 PAN LED", + [32] = "gpio%u.MiniPCIe1 PAN LED", + [33] = "gpio%u.MiniPCIe2 PAN LED", + [34] = "gpio%u.WAN PHY LED0", + [35] = "gpio%u.WAN PHY LED1", + [36] = "gpio%u.LAN switch p0 LED0", + [37] = "gpio%u.LAN switch p0 LED1", + [38] = "gpio%u.LAN switch p1 LED0", + [39] = "gpio%u.LAN switch p1 LED1", + [40] = "gpio%u.LAN switch p2 LED0", + [41] = "gpio%u.LAN switch p2 LED1", + [42] = "gpio%u.LAN switch p3 LED0", + [43] = "gpio%u.LAN switch p3 LED1", + [44] = "gpio%u.LAN switch p4 LED0", + [45] = "gpio%u.LAN switch p4 LED1", + [46] = "gpio%u.LAN switch p5 LED0", + [47] = "gpio%u.LAN switch p5 LED1", + + /* GPIOs with value read from the 16-bit wide extended control status */ + [48] = "gpio%u.eMMC nRESET", + [49] = "gpio%u.LAN switch nRESET", + [50] = "gpio%u.WAN PHY nRESET", + [51] = "gpio%u.MiniPCIe0 nPERST", + [52] = "gpio%u.MiniPCIe1 nPERST", + [53] = "gpio%u.MiniPCIe2 nPERST", + [54] = "gpio%u.WAN PHY SFP mux", +}; + +#define _DEF_GPIO(_cmd, _ctl_cmd, _bit, _ctl_bit, _int_bit, _feat, _feat_mask) \ + { \ + .cmd = _cmd, \ + .ctl_cmd = _ctl_cmd, \ + .bit = _bit, \ + .ctl_bit = _ctl_bit, \ + .int_bit = _int_bit, \ + .feat = _feat, \ + .feat_mask = _feat_mask, \ + } +#define _DEF_GPIO_STS(_name) \ + _DEF_GPIO(CMD_GET_STATUS_WORD, 0, STS_ ## _name, 0, INT_ ## _name, 0, 0) +#define _DEF_GPIO_CTL(_name) \ + _DEF_GPIO(CMD_GET_STATUS_WORD, CMD_GENERAL_CONTROL, STS_ ## _name, \ + CTL_ ## _name, 0, 0, 0) +#define _DEF_GPIO_EXT_STS(_name, _feat) \ + _DEF_GPIO(CMD_GET_EXT_STATUS_DWORD, 0, EXT_STS_ ## _name, 0, \ + INT_ ## _name, FEAT_ ## _feat | FEAT_EXT_CMDS, \ + FEAT_ ## _feat | FEAT_EXT_CMDS) +#define _DEF_GPIO_EXT_STS_LED(_name, _ledext) \ + _DEF_GPIO(CMD_GET_EXT_STATUS_DWORD, 0, EXT_STS_ ## _name, 0, \ + INT_ ## _name, FEAT_LED_STATE_ ## _ledext, \ + FEAT_LED_STATE_EXT_MASK) +#define _DEF_GPIO_EXT_STS_LEDALL(_name) \ + _DEF_GPIO(CMD_GET_EXT_STATUS_DWORD, 0, EXT_STS_ ## _name, 0, \ + INT_ ## _name, FEAT_LED_STATE_EXT_MASK, 0) +#define _DEF_GPIO_EXT_CTL(_name, _feat) \ + _DEF_GPIO(CMD_GET_EXT_CONTROL_STATUS, CMD_EXT_CONTROL, \ + EXT_CTL_ ## _name, EXT_CTL_ ## _name, 0, \ + FEAT_ ## _feat | FEAT_EXT_CMDS, \ + FEAT_ ## _feat | FEAT_EXT_CMDS) +#define _DEF_INT(_name) \ + _DEF_GPIO(0, 0, 0, 0, INT_ ## _name, 0, 0) + +static const struct omnia_gpio { + u8 cmd, ctl_cmd; + u32 bit, ctl_bit; + u32 int_bit; + u16 feat, feat_mask; +} omnia_gpios[64] = { + /* GPIOs with value read from the 16-bit wide status */ + [4] = _DEF_GPIO_STS(CARD_DET), + [5] = _DEF_GPIO_STS(MSATA_IND), + [6] = _DEF_GPIO_STS(USB30_OVC), + [7] = _DEF_GPIO_STS(USB31_OVC), + [8] = _DEF_GPIO_CTL(USB30_PWRON), + [9] = _DEF_GPIO_CTL(USB31_PWRON), + + /* brightness changed interrupt, no GPIO */ + [11] = _DEF_INT(BRIGHTNESS_CHANGED), + + [12] = _DEF_GPIO_STS(BUTTON_PRESSED), + + /* TRNG interrupt, no GPIO */ + [13] = _DEF_INT(TRNG), + + /* MESSAGE_SIGNED interrupt, no GPIO */ + [14] = _DEF_INT(MESSAGE_SIGNED), + + /* GPIOs with value read from the 32-bit wide extended status */ + [16] = _DEF_GPIO_EXT_STS(SFP_nDET, PERIPH_MCU), + [28] = _DEF_GPIO_EXT_STS_LEDALL(WLAN0_MSATA_LED), + [29] = _DEF_GPIO_EXT_STS_LEDALL(WLAN1_LED), + [30] = _DEF_GPIO_EXT_STS_LEDALL(WLAN2_LED), + [31] = _DEF_GPIO_EXT_STS_LED(WPAN0_LED, EXT), + [32] = _DEF_GPIO_EXT_STS_LED(WPAN1_LED, EXT), + [33] = _DEF_GPIO_EXT_STS_LED(WPAN2_LED, EXT), + [34] = _DEF_GPIO_EXT_STS_LEDALL(WAN_LED0), + [35] = _DEF_GPIO_EXT_STS_LED(WAN_LED1, EXT_V32), + [36] = _DEF_GPIO_EXT_STS_LEDALL(LAN0_LED0), + [37] = _DEF_GPIO_EXT_STS_LEDALL(LAN0_LED1), + [38] = _DEF_GPIO_EXT_STS_LEDALL(LAN1_LED0), + [39] = _DEF_GPIO_EXT_STS_LEDALL(LAN1_LED1), + [40] = _DEF_GPIO_EXT_STS_LEDALL(LAN2_LED0), + [41] = _DEF_GPIO_EXT_STS_LEDALL(LAN2_LED1), + [42] = _DEF_GPIO_EXT_STS_LEDALL(LAN3_LED0), + [43] = _DEF_GPIO_EXT_STS_LEDALL(LAN3_LED1), + [44] = _DEF_GPIO_EXT_STS_LEDALL(LAN4_LED0), + [45] = _DEF_GPIO_EXT_STS_LEDALL(LAN4_LED1), + [46] = _DEF_GPIO_EXT_STS_LEDALL(LAN5_LED0), + [47] = _DEF_GPIO_EXT_STS_LEDALL(LAN5_LED1), + + /* GPIOs with value read from the 16-bit wide extended control status */ + [48] = _DEF_GPIO_EXT_CTL(nRES_MMC, PERIPH_MCU), + [49] = _DEF_GPIO_EXT_CTL(nRES_LAN, PERIPH_MCU), + [50] = _DEF_GPIO_EXT_CTL(nRES_PHY, PERIPH_MCU), + [51] = _DEF_GPIO_EXT_CTL(nPERST0, PERIPH_MCU), + [52] = _DEF_GPIO_EXT_CTL(nPERST1, PERIPH_MCU), + [53] = _DEF_GPIO_EXT_CTL(nPERST2, PERIPH_MCU), + [54] = _DEF_GPIO_EXT_CTL(PHY_SFP, PERIPH_MCU), +}; + +/* mapping from interrupts to indexes of GPIOs in the omnia_gpios array */ +static const u8 omnia_int_to_gpio_idx[32] = { + [__bf_shf(INT_CARD_DET)] = 4, + [__bf_shf(INT_MSATA_IND)] = 5, + [__bf_shf(INT_USB30_OVC)] = 6, + [__bf_shf(INT_USB31_OVC)] = 7, + [__bf_shf(INT_BUTTON_PRESSED)] = 12, + [__bf_shf(INT_TRNG)] = 13, + [__bf_shf(INT_MESSAGE_SIGNED)] = 14, + [__bf_shf(INT_SFP_nDET)] = 16, + [__bf_shf(INT_BRIGHTNESS_CHANGED)] = 11, + [__bf_shf(INT_WLAN0_MSATA_LED)] = 28, + [__bf_shf(INT_WLAN1_LED)] = 29, + [__bf_shf(INT_WLAN2_LED)] = 30, + [__bf_shf(INT_WPAN0_LED)] = 31, + [__bf_shf(INT_WPAN1_LED)] = 32, + [__bf_shf(INT_WPAN2_LED)] = 33, + [__bf_shf(INT_WAN_LED0)] = 34, + [__bf_shf(INT_WAN_LED1)] = 35, + [__bf_shf(INT_LAN0_LED0)] = 36, + [__bf_shf(INT_LAN0_LED1)] = 37, + [__bf_shf(INT_LAN1_LED0)] = 38, + [__bf_shf(INT_LAN1_LED1)] = 39, + [__bf_shf(INT_LAN2_LED0)] = 40, + [__bf_shf(INT_LAN2_LED1)] = 41, + [__bf_shf(INT_LAN3_LED0)] = 42, + [__bf_shf(INT_LAN3_LED1)] = 43, + [__bf_shf(INT_LAN4_LED0)] = 44, + [__bf_shf(INT_LAN4_LED1)] = 45, + [__bf_shf(INT_LAN5_LED0)] = 46, + [__bf_shf(INT_LAN5_LED1)] = 47, +}; + +/* index of PHY_SFP GPIO in the omnia_gpios array */ +#define OMNIA_GPIO_PHY_SFP_OFFSET 54 + +static int omnia_ctl_cmd_locked(struct omnia_mcu *mcu, u8 cmd, u16 val, + u16 mask) +{ + size_t len; + u8 buf[5]; + + buf[0] = cmd; + + switch (cmd) { + case CMD_GENERAL_CONTROL: + buf[1] = val; + buf[2] = mask; + len = 3; + break; + + case CMD_EXT_CONTROL: + put_unaligned_le16(val, &buf[1]); + put_unaligned_le16(mask, &buf[3]); + len = 5; + break; + + default: + BUG(); + } + + return omnia_cmd_write(mcu->client, buf, len); +} + +static int omnia_ctl_cmd(struct omnia_mcu *mcu, u8 cmd, u16 val, u16 mask) +{ + guard(mutex)(&mcu->lock); + + return omnia_ctl_cmd_locked(mcu, cmd, val, mask); +} + +static int omnia_gpio_request(struct gpio_chip *gc, unsigned int offset) +{ + if (!omnia_gpios[offset].cmd) + return -EINVAL; + + return 0; +} + +static int omnia_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + if (offset == OMNIA_GPIO_PHY_SFP_OFFSET) { + int val; + + scoped_guard(mutex, &mcu->lock) + val = omnia_cmd_read_bit(mcu->client, + CMD_GET_EXT_CONTROL_STATUS, + EXT_CTL_PHY_SFP_AUTO); + + if (val < 0) + return val; + + if (val) + return GPIO_LINE_DIRECTION_IN; + + return GPIO_LINE_DIRECTION_OUT; + } + + if (omnia_gpios[offset].ctl_cmd) + return GPIO_LINE_DIRECTION_OUT; + + return GPIO_LINE_DIRECTION_IN; +} + +static int omnia_gpio_direction_input(struct gpio_chip *gc, unsigned int offset) +{ + const struct omnia_gpio *gpio = &omnia_gpios[offset]; + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + if (offset == OMNIA_GPIO_PHY_SFP_OFFSET) + return omnia_ctl_cmd(mcu, CMD_EXT_CONTROL, EXT_CTL_PHY_SFP_AUTO, + EXT_CTL_PHY_SFP_AUTO); + + if (gpio->ctl_cmd) + return -ENOTSUPP; + + return 0; +} + +static int omnia_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int value) +{ + const struct omnia_gpio *gpio = &omnia_gpios[offset]; + struct omnia_mcu *mcu = gpiochip_get_data(gc); + u16 val, mask; + + if (!gpio->ctl_cmd) + return -ENOTSUPP; + + mask = gpio->ctl_bit; + val = value ? mask : 0; + + if (offset == OMNIA_GPIO_PHY_SFP_OFFSET) + mask |= EXT_CTL_PHY_SFP_AUTO; + + return omnia_ctl_cmd(mcu, gpio->ctl_cmd, val, mask); +} + +static int omnia_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + const struct omnia_gpio *gpio = &omnia_gpios[offset]; + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + /* + * If firmware does not support the new interrupt API, we are informed + * of every change of the status word by an interrupt from MCU and save + * its value in the interrupt service routine. Simply return the saved + * value. + */ + if (gpio->cmd == CMD_GET_STATUS_WORD && + !(mcu->features & FEAT_NEW_INT_API)) + return !!(mcu->last_status & gpio->bit); + + guard(mutex)(&mcu->lock); + + /* + * If firmware does support the new interrupt API, we may have cached + * the value of a GPIO in the interrupt service routine. If not, read + * the relevant bit now. + */ + if (gpio->int_bit && (mcu->is_cached & gpio->int_bit)) + return !!(mcu->cached & gpio->int_bit); + + return omnia_cmd_read_bit(mcu->client, gpio->cmd, gpio->bit); +} + +static int omnia_gpio_get_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + u32 sts_bits, ext_sts_bits, ext_ctl_bits; + int err, i; + + sts_bits = 0; + ext_sts_bits = 0; + ext_ctl_bits = 0; + + /* determine which bits to read from the 3 possible commands */ + for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) { + if (omnia_gpios[i].cmd == CMD_GET_STATUS_WORD) + sts_bits |= omnia_gpios[i].bit; + else if (omnia_gpios[i].cmd == CMD_GET_EXT_STATUS_DWORD) + ext_sts_bits |= omnia_gpios[i].bit; + else if (omnia_gpios[i].cmd == CMD_GET_EXT_CONTROL_STATUS) + ext_ctl_bits |= omnia_gpios[i].bit; + } + + guard(mutex)(&mcu->lock); + + if (mcu->features & FEAT_NEW_INT_API) { + /* read relevant bits from status */ + err = omnia_cmd_read_bits(mcu->client, CMD_GET_STATUS_WORD, + sts_bits, &sts_bits); + if (err) + return err; + } else { + /* + * Use status word value cached in the interrupt service routine + * if firmware does not support the new interrupt API. + */ + sts_bits = mcu->last_status; + } + + /* read relevant bits from extended status */ + err = omnia_cmd_read_bits(mcu->client, CMD_GET_EXT_STATUS_DWORD, + ext_sts_bits, &ext_sts_bits); + if (err) + return err; + + /* read relevant bits from extended control */ + err = omnia_cmd_read_bits(mcu->client, CMD_GET_EXT_CONTROL_STATUS, + ext_ctl_bits, &ext_ctl_bits); + if (err) + return err; + + /* assign relevant bits in result */ + for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) { + if (omnia_gpios[i].cmd == CMD_GET_STATUS_WORD) + __assign_bit(i, bits, sts_bits & omnia_gpios[i].bit); + else if (omnia_gpios[i].cmd == CMD_GET_EXT_STATUS_DWORD) + __assign_bit(i, bits, ext_sts_bits & + omnia_gpios[i].bit); + else if (omnia_gpios[i].cmd == CMD_GET_EXT_CONTROL_STATUS) + __assign_bit(i, bits, ext_ctl_bits & + omnia_gpios[i].bit); + } + + return 0; +} + +static void omnia_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +{ + const struct omnia_gpio *gpio = &omnia_gpios[offset]; + struct omnia_mcu *mcu = gpiochip_get_data(gc); + u16 val, mask; + + if (!gpio->ctl_cmd) + return; + + mask = gpio->ctl_bit; + val = value ? mask : 0; + + omnia_ctl_cmd(mcu, gpio->ctl_cmd, val, mask); +} + +static void omnia_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask, + unsigned long *bits) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + u16 ext_ctl, ext_ctl_mask; + u8 ctl, ctl_mask; + int i; + + ctl = 0; + ctl_mask = 0; + ext_ctl = 0; + ext_ctl_mask = 0; + + for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) { + if (omnia_gpios[i].ctl_cmd == CMD_GENERAL_CONTROL) { + ctl_mask |= omnia_gpios[i].ctl_bit; + if (test_bit(i, bits)) + ctl |= omnia_gpios[i].ctl_bit; + } else if (omnia_gpios[i].ctl_cmd == CMD_EXT_CONTROL) { + ext_ctl_mask |= omnia_gpios[i].ctl_bit; + if (test_bit(i, bits)) + ext_ctl |= omnia_gpios[i].ctl_bit; + } + } + + guard(mutex)(&mcu->lock); + + if (ctl_mask) + omnia_ctl_cmd_locked(mcu, CMD_GENERAL_CONTROL, ctl, ctl_mask); + + if (ext_ctl_mask) + omnia_ctl_cmd_locked(mcu, CMD_EXT_CONTROL, ext_ctl, + ext_ctl_mask); +} + +static bool omnia_gpio_available(struct omnia_mcu *mcu, + const struct omnia_gpio *gpio) +{ + if (gpio->feat_mask) + return (mcu->features & gpio->feat_mask) == gpio->feat; + + if (gpio->feat) + return mcu->features & gpio->feat; + + return true; +} + +static int omnia_gpio_init_valid_mask(struct gpio_chip *gc, + unsigned long *valid_mask, + unsigned int ngpios) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + for (unsigned int i = 0; i < ngpios; i++) { + const struct omnia_gpio *gpio = &omnia_gpios[i]; + + if (gpio->cmd || gpio->int_bit) + __assign_bit(i, valid_mask, + omnia_gpio_available(mcu, gpio)); + else + __clear_bit(i, valid_mask); + } + + return 0; +} + +static int omnia_gpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + u32 bank, gpio; + + if (WARN_ON(gpiospec->args_count != 3)) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[2]; + + bank = gpiospec->args[0]; + gpio = gpiospec->args[1]; + + switch (bank) { + case 0: + return gpio < 16 ? gpio : -EINVAL; + case 1: + return gpio < 32 ? 16 + gpio : -EINVAL; + case 2: + return gpio < 16 ? 48 + gpio : -EINVAL; + default: + return -EINVAL; + } +} + +static void omnia_irq_shutdown(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(d); + u32 bit = omnia_gpios[hwirq].int_bit; + + mcu->rising &= ~bit; + mcu->falling &= ~bit; +} + +static void omnia_irq_mask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(d); + u32 bit = omnia_gpios[hwirq].int_bit; + + if (!omnia_gpios[hwirq].cmd) + mcu->rising &= ~bit; + mcu->mask &= ~bit; + gpiochip_disable_irq(gc, hwirq); +} + +static void omnia_irq_unmask(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(d); + u32 bit = omnia_gpios[hwirq].int_bit; + + gpiochip_enable_irq(gc, hwirq); + mcu->mask |= bit; + if (!omnia_gpios[hwirq].cmd) + mcu->rising |= bit; +} + +static int omnia_irq_set_type(struct irq_data *d, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + irq_hw_number_t hwirq = irqd_to_hwirq(d); + struct device *dev = &mcu->client->dev; + u32 bit = omnia_gpios[hwirq].int_bit; + + if (!(type & IRQ_TYPE_EDGE_BOTH)) { + dev_err(dev, "irq %u: unsupported type %u\n", d->irq, type); + return -EINVAL; + } + + if (type & IRQ_TYPE_EDGE_RISING) + mcu->rising |= bit; + else + mcu->rising &= ~bit; + + if (type & IRQ_TYPE_EDGE_FALLING) + mcu->falling |= bit; + else + mcu->falling &= ~bit; + + return 0; +} + +static void omnia_irq_bus_lock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + /* nothing to do if MCU firmware does not support new interrupt API */ + if (!(mcu->features & FEAT_NEW_INT_API)) + return; + + mutex_lock(&mcu->lock); +} + +/** + * omnia_mask_interleave - Interleaves the bytes from @rising and @falling + * @dst: the destination u8 array of interleaved bytes + * @rising: rising mask + * @falling: falling mask + * + * Interleaves the little-endian bytes from @rising and @falling words. + * + * If @rising = (r0, r1, r2, r3) and @falling = (f0, f1, f2, f3), the result is + * @dst = (r0, f0, r1, f1, r2, f2, r3, f3). + * + * The MCU receives interrupt mask and reports pending interrupt bitmap int this + * interleaved format. The rationale behind it is that the low-indexed bits are + * more important - in many cases, the user will be interested only in + * interrupts with indexes 0 to 7, and so the system can stop reading after + * first 2 bytes (r0, f0), to save time on the slow I2C bus. + * + * Feel free to remove this function and its inverse, omnia_mask_deinterleave, + * and use an appropriate bitmap_* function once such a function exists. + */ +static void omnia_mask_interleave(u8 *dst, u32 rising, u32 falling) +{ + for (int i = 0; i < sizeof(u32); ++i) { + dst[2 * i] = rising >> (8 * i); + dst[2 * i + 1] = falling >> (8 * i); + } +} + +/** + * omnia_mask_deinterleave - Deinterleaves the bytes into @rising and @falling + * @src: the source u8 array containing the interleaved bytes + * @rising: pointer where to store the rising mask gathered from @src + * @falling: pointer where to store the falling mask gathered from @src + * + * This is the inverse function to omnia_mask_interleave. + */ +static void omnia_mask_deinterleave(const u8 *src, u32 *rising, u32 *falling) +{ + *rising = *falling = 0; + + for (int i = 0; i < sizeof(u32); ++i) { + *rising |= src[2 * i] << (8 * i); + *falling |= src[2 * i + 1] << (8 * i); + } +} + +static void omnia_irq_bus_sync_unlock(struct irq_data *d) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct omnia_mcu *mcu = gpiochip_get_data(gc); + struct device *dev = &mcu->client->dev; + u8 cmd[1 + CMD_INT_ARG_LEN]; + u32 rising, falling; + int err; + + /* nothing to do if MCU firmware does not support new interrupt API */ + if (!(mcu->features & FEAT_NEW_INT_API)) + return; + + cmd[0] = CMD_SET_INT_MASK; + + rising = mcu->rising & mcu->mask; + falling = mcu->falling & mcu->mask; + + /* interleave the rising and falling bytes into the command arguments */ + omnia_mask_interleave(&cmd[1], rising, falling); + + dev_dbg(dev, "set int mask %8ph\n", &cmd[1]); + + err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd)); + if (err) { + dev_err(dev, "Cannot set mask: %d\n", err); + goto unlock; + } + + /* + * Remember which GPIOs have both rising and falling interrupts enabled. + * For those we will cache their value so that .get() method is faster. + * We also need to forget cached values of GPIOs that aren't cached + * anymore. + */ + mcu->both = rising & falling; + mcu->is_cached &= mcu->both; + +unlock: + mutex_unlock(&mcu->lock); +} + +static const struct irq_chip omnia_mcu_irq_chip = { + .name = "Turris Omnia MCU interrupts", + .irq_shutdown = omnia_irq_shutdown, + .irq_mask = omnia_irq_mask, + .irq_unmask = omnia_irq_unmask, + .irq_set_type = omnia_irq_set_type, + .irq_bus_lock = omnia_irq_bus_lock, + .irq_bus_sync_unlock = omnia_irq_bus_sync_unlock, + .flags = IRQCHIP_IMMUTABLE, + GPIOCHIP_IRQ_RESOURCE_HELPERS, +}; + +static void omnia_irq_init_valid_mask(struct gpio_chip *gc, + unsigned long *valid_mask, + unsigned int ngpios) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + + for (unsigned int i = 0; i < ngpios; i++) { + const struct omnia_gpio *gpio = &omnia_gpios[i]; + + if (gpio->int_bit) + __assign_bit(i, valid_mask, + omnia_gpio_available(mcu, gpio)); + else + __clear_bit(i, valid_mask); + } +} + +static int omnia_irq_init_hw(struct gpio_chip *gc) +{ + struct omnia_mcu *mcu = gpiochip_get_data(gc); + u8 cmd[1 + CMD_INT_ARG_LEN] = {}; + + cmd[0] = CMD_SET_INT_MASK; + + return omnia_cmd_write(mcu->client, cmd, sizeof(cmd)); +} + +/* + * Determine how many bytes we need to read from the reply to the + * CMD_GET_INT_AND_CLEAR command in order to retrieve all unmasked interrupts. + */ +static size_t omnia_irq_compute_pending_length(u32 rising, u32 falling) +{ + size_t rlen = 0, flen = 0; + + if (rising) + rlen = ((__fls(rising) >> 3) << 1) + 1; + + if (falling) + flen = ((__fls(falling) >> 3) << 1) + 2; + + return max(rlen, flen); +} + +static bool omnia_irq_read_pending_new(struct omnia_mcu *mcu, + unsigned long *pending) +{ + struct device *dev = &mcu->client->dev; + u8 reply[CMD_INT_ARG_LEN] = {}; + u32 rising, falling; + size_t len; + int err; + + len = omnia_irq_compute_pending_length(mcu->rising & mcu->mask, + mcu->falling & mcu->mask); + if (!len) + return false; + + guard(mutex)(&mcu->lock); + + err = omnia_cmd_read(mcu->client, CMD_GET_INT_AND_CLEAR, reply, + len); + if (err) { + dev_err(dev, "Cannot read pending IRQs: %d\n", err); + return false; + } + + /* deinterleave the reply bytes into rising and falling */ + omnia_mask_deinterleave(reply, &rising, &falling); + + rising &= mcu->mask; + falling &= mcu->mask; + *pending = rising | falling; + + /* cache values for GPIOs that have both edges enabled */ + mcu->is_cached &= ~(rising & falling); + mcu->is_cached |= mcu->both & (rising ^ falling); + mcu->cached = (mcu->cached | rising) & ~falling; + + return true; +} + +static int omnia_read_status_word_old_fw(struct omnia_mcu *mcu, u16 *status) +{ + int ret; + + ret = omnia_cmd_read_u16(mcu->client, CMD_GET_STATUS_WORD); + if (ret < 0) + return ret; + + /* + * Old firmware has a bug wherein it never resets the USB port + * overcurrent bits back to zero. Ignore them. + */ + *status = ret & ~(STS_USB30_OVC | STS_USB31_OVC); + + return 0; +} + +static void button_release_emul_fn(struct work_struct *work) +{ + struct omnia_mcu *mcu = container_of(to_delayed_work(work), + struct omnia_mcu, + button_release_emul_work); + + mcu->button_pressed_emul = false; + generic_handle_irq_safe(mcu->client->irq); +} + +static void fill_int_from_sts(u32 *rising, u32 *falling, u16 rising_sts, + u16 falling_sts, u16 sts_bit, u32 int_bit) +{ + if (rising_sts & sts_bit) + *rising |= int_bit; + if (falling_sts & sts_bit) + *falling |= int_bit; +} + +static bool omnia_irq_read_pending_old(struct omnia_mcu *mcu, + unsigned long *pending) +{ + struct device *dev = &mcu->client->dev; + u16 status, rising_sts, falling_sts; + u32 rising, falling; + int ret; + + guard(mutex)(&mcu->lock); + + ret = omnia_read_status_word_old_fw(mcu, &status); + if (ret < 0) { + dev_err(dev, "Cannot read pending IRQs: %d\n", ret); + return false; + } + + /* + * The old firmware triggers an interrupt whenever status word changes, + * but does not inform about which bits rose or fell. We need to compute + * this here by comparing with the last status word value. + * + * The STS_BUTTON_PRESSED bit needs special handling, because the old + * firmware clears the STS_BUTTON_PRESSED bit on successful completion + * of the CMD_GET_STATUS_WORD command, resulting in another interrupt: + * - first we get an interrupt, we read the status word where + * STS_BUTTON_PRESSED is present, + * - MCU clears the STS_BUTTON_PRESSED bit because we read the status + * word, + * - we get another interrupt because the status word changed again + * (STS_BUTTON_PRESSED was cleared). + * + * The gpiolib-cdev, gpiolib-sysfs and gpio-keys input driver all call + * the gpiochip's .get() method after an edge event on a requested GPIO + * occurs. + * + * We ensure that the .get() method reads 1 for the button GPIO for some + * time. + */ + + if (status & STS_BUTTON_PRESSED) { + mcu->button_pressed_emul = true; + mod_delayed_work(system_wq, &mcu->button_release_emul_work, + msecs_to_jiffies(FRONT_BUTTON_RELEASE_DELAY)); + } else if (mcu->button_pressed_emul) { + status |= STS_BUTTON_PRESSED; + } + + rising_sts = ~mcu->last_status & status; + falling_sts = mcu->last_status & ~status; + + mcu->last_status = status; + + /* + * Fill in the relevant interrupt bits from status bits for CARD_DET, + * MSATA_IND and BUTTON_PRESSED. + */ + rising = 0; + falling = 0; + fill_int_from_sts(&rising, &falling, rising_sts, falling_sts, + STS_CARD_DET, INT_CARD_DET); + fill_int_from_sts(&rising, &falling, rising_sts, falling_sts, + STS_MSATA_IND, INT_MSATA_IND); + fill_int_from_sts(&rising, &falling, rising_sts, falling_sts, + STS_BUTTON_PRESSED, INT_BUTTON_PRESSED); + + /* Use only bits that are enabled */ + rising &= mcu->rising & mcu->mask; + falling &= mcu->falling & mcu->mask; + *pending = rising | falling; + + return true; +} + +static bool omnia_irq_read_pending(struct omnia_mcu *mcu, + unsigned long *pending) +{ + if (mcu->features & FEAT_NEW_INT_API) + return omnia_irq_read_pending_new(mcu, pending); + else + return omnia_irq_read_pending_old(mcu, pending); +} + +static irqreturn_t omnia_irq_thread_handler(int irq, void *dev_id) +{ + struct omnia_mcu *mcu = dev_id; + struct irq_domain *domain; + unsigned long pending; + int i; + + if (!omnia_irq_read_pending(mcu, &pending)) + return IRQ_NONE; + + domain = mcu->gc.irq.domain; + + for_each_set_bit(i, &pending, 32) { + unsigned int nested_irq; + + nested_irq = irq_find_mapping(domain, omnia_int_to_gpio_idx[i]); + + handle_nested_irq(nested_irq); + } + + return IRQ_RETVAL(pending); +} + +static const char * const front_button_modes[2] = { "mcu", "cpu" }; + +static ssize_t front_button_mode_show(struct device *dev, + struct device_attribute *a, char *buf) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + int val; + + if (mcu->features & FEAT_NEW_INT_API) { + val = omnia_cmd_read_bit(mcu->client, CMD_GET_STATUS_WORD, + STS_BUTTON_MODE); + if (val < 0) + return val; + } else { + val = !!(mcu->last_status & STS_BUTTON_MODE); + } + + return sysfs_emit(buf, "%s\n", front_button_modes[val]); +} + +static ssize_t front_button_mode_store(struct device *dev, + struct device_attribute *a, + const char *buf, size_t count) +{ + struct omnia_mcu *mcu = dev_get_drvdata(dev); + int err, i; + + i = sysfs_match_string(front_button_modes, buf); + if (i < 0) + return i; + + err = omnia_ctl_cmd_locked(mcu, CMD_GENERAL_CONTROL, + i ? CTL_BUTTON_MODE : 0, + CTL_BUTTON_MODE); + if (err) + return err; + + return count; +} +static DEVICE_ATTR_RW(front_button_mode); + +static struct attribute *omnia_mcu_gpio_attrs[] = { + &dev_attr_front_button_mode.attr, + NULL +}; + +const struct attribute_group omnia_mcu_gpio_group = { + .attrs = omnia_mcu_gpio_attrs, +}; + +int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu) +{ + bool new_api = mcu->features & FEAT_NEW_INT_API; + struct device *dev = &mcu->client->dev; + unsigned long irqflags; + int err; + + err = devm_mutex_init(dev, &mcu->lock); + if (err) + return err; + + mcu->gc.request = omnia_gpio_request; + mcu->gc.get_direction = omnia_gpio_get_direction; + mcu->gc.direction_input = omnia_gpio_direction_input; + mcu->gc.direction_output = omnia_gpio_direction_output; + mcu->gc.get = omnia_gpio_get; + mcu->gc.get_multiple = omnia_gpio_get_multiple; + mcu->gc.set = omnia_gpio_set; + mcu->gc.set_multiple = omnia_gpio_set_multiple; + mcu->gc.init_valid_mask = omnia_gpio_init_valid_mask; + mcu->gc.can_sleep = true; + mcu->gc.names = omnia_mcu_gpio_templates; + mcu->gc.base = -1; + mcu->gc.ngpio = ARRAY_SIZE(omnia_gpios); + mcu->gc.label = "Turris Omnia MCU GPIOs"; + mcu->gc.parent = dev; + mcu->gc.owner = THIS_MODULE; + mcu->gc.of_gpio_n_cells = 3; + mcu->gc.of_xlate = omnia_gpio_of_xlate; + + gpio_irq_chip_set_chip(&mcu->gc.irq, &omnia_mcu_irq_chip); + /* This will let us handle the parent IRQ in the driver */ + mcu->gc.irq.parent_handler = NULL; + mcu->gc.irq.num_parents = 0; + mcu->gc.irq.parents = NULL; + mcu->gc.irq.default_type = IRQ_TYPE_NONE; + mcu->gc.irq.handler = handle_bad_irq; + mcu->gc.irq.threaded = true; + if (new_api) + mcu->gc.irq.init_hw = omnia_irq_init_hw; + mcu->gc.irq.init_valid_mask = omnia_irq_init_valid_mask; + + err = devm_gpiochip_add_data(dev, &mcu->gc, mcu); + if (err) + return dev_err_probe(dev, err, "Cannot add GPIO chip\n"); + + /* + * Before requesting the interrupt, if firmware does not support the new + * interrupt API, we need to cache the value of the status word, so that + * when it changes, we may compare the new value with the cached one in + * the interrupt handler. + */ + if (!new_api) { + err = omnia_read_status_word_old_fw(mcu, &mcu->last_status); + if (err < 0) + return dev_err_probe(dev, err, + "Cannot read status word\n"); + + INIT_DELAYED_WORK(&mcu->button_release_emul_work, + button_release_emul_fn); + } + + irqflags = IRQF_ONESHOT; + if (new_api) + irqflags |= IRQF_TRIGGER_LOW; + else + irqflags |= IRQF_TRIGGER_FALLING; + + err = devm_request_threaded_irq(dev, mcu->client->irq, NULL, + omnia_irq_thread_handler, irqflags, + "turris-omnia-mcu", mcu); + if (err) + return dev_err_probe(dev, err, "Cannot request IRQ\n"); + + if (!new_api) { + /* + * The button_release_emul_work has to be initialized before the + * thread is requested, and on driver remove it needs to be + * canceled before the thread is freed. Therefore we can't use + * devm_delayed_work_autocancel() directly, because the order + * devm_delayed_work_autocancel(); + * devm_request_threaded_irq(); + * would cause improper release order: + * free_irq(); + * cancel_delayed_work_sync(); + * Instead we first initialize the work above, and only now + * after IRQ is requested we add the work devm action. + */ + err = devm_add_action(dev, devm_delayed_work_drop, + &mcu->button_release_emul_work); + if (err) + return err; + } + + return 0; +} diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h index 5b21fbca8fe1..e8d9bf1c8fdc 100644 --- a/drivers/platform/cznic/turris-omnia-mcu.h +++ b/drivers/platform/cznic/turris-omnia-mcu.h @@ -8,9 +8,12 @@ #ifndef __TURRIS_OMNIA_MCU_H #define __TURRIS_OMNIA_MCU_H -#include +#include +#include #include +#include #include +#include #include struct omnia_mcu { @@ -22,10 +25,66 @@ struct omnia_mcu { u64 board_serial_number; u8 board_first_mac[ETH_ALEN]; u8 board_revision; + + /* GPIO chip */ + struct gpio_chip gc; + struct mutex lock; + u32 mask, rising, falling, both, cached, is_cached; + /* Old MCU firmware handling needs the following */ + struct delayed_work button_release_emul_work; + u16 last_status; + bool button_pressed_emul; }; -int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply, - unsigned int len); +int omnia_cmd_write_read(const struct i2c_client *client, + void *cmd, unsigned int cmd_len, + void *reply, unsigned int reply_len); + +static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd, + size_t len) +{ + return omnia_cmd_write_read(client, cmd, len, NULL, 0); +} + +static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd, + void *reply, unsigned int len) +{ + return omnia_cmd_write_read(client, &cmd, 1, reply, len); +} + +/* Returns 0 on success */ +static inline int omnia_cmd_read_bits(const struct i2c_client *client, u8 cmd, + u32 bits, u32 *dst) +{ + __le32 reply; + int err; + + if (!bits) { + *dst = 0; + return 0; + } + + err = omnia_cmd_read(client, cmd, &reply, (__fls(bits) >> 3) + 1); + if (err) + return err; + + *dst = le32_to_cpu(reply) & bits; + + return 0; +} + +static inline int omnia_cmd_read_bit(const struct i2c_client *client, u8 cmd, + u32 bit) +{ + u32 reply; + int err; + + err = omnia_cmd_read_bits(client, cmd, bit, &reply); + if (err) + return err; + + return !!reply; +} static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd) { @@ -47,4 +106,8 @@ static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd) return err ?: reply; } +extern const struct attribute_group omnia_mcu_gpio_group; + +int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu); + #endif /* __TURRIS_OMNIA_MCU_H */